This page provides instructions for logging in to the LCLS and FACET control system. These instructions assume that you are using a PC running Windows. Instructions for Mac Users click here or Linux Users click here.
For special instructions on how to bring up the LCLS Home screen on a CUD click here.
For first time users, click here for configuration information.
There is an alternative method for logging into the controls system using a Linux remote desktop via MobaXterm instructions for installations and configuration can be found here .
$
represents the command line prompt. Type the text to the right of the $
on the command line.
Make sure that xwin32 is installed and running. If it's running you will see a blue X logo in the tray at the bottom right corner of the Windows screen. Launch SecureCRT or putty and connect to host mcclogin.slac.stanford.edu. If a Security Warning pops up, click Accept & Continue. Log in with your Unix username and password. At the prompt on mcclogin, type
or
or
depending on which group account you were added to in Step 2 above. If you see a prompt for a password, something went wrong and you need to contrack Ken Brobeck. Launch LCLS Home Screen. At the prompt, type:
If you don't want to type "ssh <groupname>@lcls-srv01" and "lclshome" every time you connect to the control system, click here and follow the instructions for LCLSHOME Short-Cuts. |
Make sure that xwin32 is installed and running. If it's running you will see a blue X logo in the tray at the bottom right corner of the Windows screen. Launch SecureCRT or putty and connect to host mcclogin.slac.stanford.edu. If a Security Warning pops up, click Accept & Continue. Log in with your Unix username and password. At the prompt on mcclogin, typessh fphysics@facet-srv01 orssh facclegr@lcls-srv01 depending on which group account you were added to in Step 2 above. If you see a prompt for a password, something went wrong and you need to contrack Ken Brobeck. Launch FACET Home Screen. At the prompt, type:facethome |
Login to lcls-dev2 with
Find out what shell you are running by typing
I am running If you are using
If you are using
And start up the lcls home screen by typing:
|
If you cannot bring up the lclshome, from a SecureCRT window, double check the Xll forward has been set. See Step 4.1 above. If you still cann't bring up lclshome, verify that you have X-Win32 running. You should see an X icon on the menu bar. If the X-Win32 icon isn't there, then start X-Win32 and try to bring up lclshome again. |