Content

Notes

Below are tables that can be updated with time-ordered publicly-released geometry files (most recent at top of table).

All geometry formats used by LCLS (crystfel-hdf5, crystfel-cxidb, cctbx, psana) can be placed here. TJ Lane has geometry-conversion scripts (currently psana/cheetah/crystfel, but cctbx will be added). They can be obtained from github here: https://github.com/LinacCoherentLightSource/psgeom.

Optical measurements can be found HERE. Corrected optical metrology in text format can be found under the page CSPAD Alignment.

Diagram

Note the DS1 and DS2 chambers can move to different locations. Also, Camera1 and Camera2 can move between DS1 and DS2 chambers. Sample chambers, SC1-SC3 are fixed.

LCLS Data Analysis > Geometry History > Screen Shot 2015-12-08 at 5.05.24 PM.png

Geometries


Date	Who uploaded	Experiment	Geometry File Name	File Type	DAQ "Source" Name (Ds1/Ds2)	Front/Back	Camera	Comment
2016-01-09	yoon	cxic0915	cxic0915_100.geom cxic0915_200.geom cxic0915_300.geom cxic0915_400.geom cxic0915_480.geom	crystfel-cxidb	CxiDs1.0:Cspad.0	Front	Camera1_V16_20140924	The refined geometry file for detector calibration by Chuck Yoon. The xxx in cxic0915_xxx.geom represents the camera length. The detector was translated in x & y w.r.t powder ring at different detector distances.
2015-12-22	valerio	cxij9415	cxij9415.geom	crystfel-cxidb	CxiDs1.0:Cspad.0	Front	Camera1_V16_20140924	The refined geometry file for LJ94 from Nadia Zatsepin. PI: Dominik Oberthuer Thanks to Yun-Xing Wang for the data used for the refinement
2015-12-07	yoon	cxic0915	cxic0915-v4.geom	crystfel-cxidb	CxiDs1.0:Cspad.0	Front	Camera1_V16_20140924	The refined geometry file for detector calibration by Chuck Yoon. We thank Petra Fromme's team for the phycocynin sample.
2015-11-12	yoon	cxij4915	cxij4915-v12.geom	crystfel-cxidb	CxiDs1.0:Cspad.0	Front	Camera2_V16_20150120	The refined geometry file for L049 using Intor from Nadia Zatsepin. PI: Petra Fromme Please acknowledge Petra's team for the use of this geometry file in your research if you use any part of this geometry file. Do not remove the history section of the geom file.
2015-07-14	valerio	cxih9615	/reg/g/psdm/detector/alignment/cspad/openGeom/crystfel/ cxih9615_gv_v1.geom	crystfel-cxidb	CxiDs2.0:Cspad.0		Camera1_V16_20140924	File from 2015-06-27 further refined using more data
2015-06-27	valerio	cxih9615	/reg/g/psdm/detector/alignment/cspad/openGeom/crystfel/ 2015-06-27-cxih9615.geom	crystfel-cxidb	CxiDs2.0:Cspad.0		Camera1_V16_20140924	The refined geometry file for LH96 (Obertheuer beamtime)
2015-06-02	dubrovin	cxih8015	/reg/g/psdm/detector/alignment/cspad/calib-cxi-camera1-2014-09-24/calib/CsPad::CalibV1/CxiDs1.0:Cspad.0/geometry/geometry-camera1-in-ds2-cxih8015-r176.data	psana	CxiDs2.0:Cspad.0		Camera1_V16_20140924	Generated from /reg/g/psdm/detector/alignment/cspad/calib-cxi-camera1-2014-09-24/2014-09-24-CSPAD-CXI-Camera1-Metrology-corr.txt Geometry file is deployed for cxi86715
2015-04-01	valerio	cxii6315	/reg/g/psdm/detector/alignment/cspad/openGeom/crystfel/ 2015-04-01-cxii6315-ds1.geom	crystfel-cxidb	CxiDs1.0:Cspad.0		Camera2_V16_20150120	The refined geometry file for LI63 (Zatsepin beamtime) Mislabeled in openGeom folder Caution: geoptimiser v0.6.0 has a bug which could have effected this geom file.
2015-03-26	cpo		/reg/g/psdm/detector/alignment/cspad/calib-cxi-camera1-2014-09-24/calib/CsPad::CalibV1/CxiDs1.0:Cspad.0/geometry/0-end.data	psana	CxiDs1.0:Cspad.0		Camera1_V16_20140924	Generated from 2014-09-24-CSPAD-CXI-Camera1-Metrology.xlsx. No quad alignment.
2015-03-26	cpo		/reg/g/psdm/detector/alignment/cspad/calib-cxi-camera2-2015-01-20/calib/CsPad::CalibV1/CxiDs2.0:Cspad.0/geometry/0-end.data	psana	CxiDs2.0:Cspad.0		Camera2_V16_20150120	Generated from 2015-01-20-CSPAD-CXI-Camera2-Metrology.xlsx. No quad alignment.
2015-03-25	blaj dubrovin		2014-09-24-CSPAD-CXI-Camera1-Metrology.xlsx /reg/g/psdm/detector/alignment/cspad/calib-cxi-camera1-2014-09-24/2014-09-24-CSPAD-CXI-Camera1-Metrology.txt	xlsx txt			Camera1_V16_20140924	optical metrology converted using calibman
2015-03-25	blaj dubrovin		2015-01-20-CSPAD-CXI-Camera2-Metrology.xlsx /reg/g/psdm/detector/alignment/cspad/calib-cxi-camera2-2015-01-20/2015-01-20-CSPAD-CXI-Camera2-Metrology.txt	xlsx txt			Camera2_V16_20150120	optical metrology converted using calibman
2015-03-21	valerio	cxig0915	/reg/g/psdm/detector/alignment/cspad/openGeom/crystfel/ 2015-03-21-cxig0915-ds1.geom	crystfel-cxidb	CxiDs1.0:Cspad.0		Camera2_V16_20150120	The final refined geometry file for LG09 (Schmidt beamtime) for CXIDB data format. Mislabeled in openGeom folder
2014-12-17	koglin		/reg/g/psdm/detector/alignment/cspad/Dg4Cspad_ami_20141217_geo.1e000a00.dat	ami			Camera3_V16_20131009	Need to copy over (permissions?) cp /reg/g/pcds/pds/cspadcalib/geo.1e000a00.dat /reg/g/psdm/detector/alignment/cspad/Dg4Cspad_ami_20141217_geo.1e000a00.dat

Camera History

Camera1_V16_20140924

Optical Metrology file:
- 2014-09-24-CXI-Camera1-Metrology.xlsx
- <https://confluence.slac.stanford.edu/download/attachments/107749188/2014-09-24-CXI-DS1-Metrology.xlsx?version=1&modificationDate=1414457576000&api=v2>
2014-09-24 -- fixed and moved to DS2 chamber
- mixed quadrants:
  - 3 old A boards (Q0, Q1, Q2), 4/40
  - 1 new board (Q3), 3/19
2014-11-19 -- DS1 @ DSD
- moved back to DS1 chamber in DSD location
- Used for PCS, IH and cxig3616
2015-01-10 -- DS1 @ DSC location
- Used for cxig1515
  - src = 'DetInfo(CxiDs1.0:Cspad.0)'
  - alias = DscCsPad
  - Relative detector Z position:
    - alias = 'DscCsPad_z'
    - pv = 'CXI:DS1:MMS:06.RBV'
2015-03-17 -- DS2 @ DSD location
- Camera 1 was moved to DS2 chamber at DSD location.
- The previously broken D50 Concentrator was replaced with older concentrator.
  - Quadrants 2 and 0 were swapped.
- Back detector (generally not used) for SC1 experiments from 2015-03-18 to 2015-05-04
  - src = 'DetInfo(CxiDs2.0:Cspad.0)'
  - alias = DsdCsPad
  - Relative detector Z position:
    - alias = 'DsdCsPad_z'
    - pv = 'CXI:DS2:MMS:06.RBV'
2015-05-04 -- DS2 @ DSD
- Cables for Camera 1 in DS2 corrected and collimator pipe removed from front DS1
- Back detector for SC1 experiments from 2015-05-04 to 2015-05-17
  - src = 'DetInfo(CxiDs2.0:Cspad.0)'
  - alias = DsdCsPad
  - Relative detector Z position:
    - alias = 'DsdCsPad_z'
    - pv = 'CXI:DS2:MMS:06.RBV'
2015-12-07 -- DS1 @ DSC
- Camera1 was moved from DS2 (at DSD) to DS1 (at DSC) because Camera2 in DS1 was damaged.
  - src = 'DetInfo(CxiDs1.0:Cspad.0)'
  - alias = DscCsPad
  - Relative detector Z position:
    - alias = 'DscCsPad_z'
    - pv = 'CXI:DS1:MMS:06.RBV'

Camera2_V16_20150120

2015-02-02 -- DS2 chamber with refurbished Camera2 moved to DSA location
- Non-standard configuration given D50 CsPad rack concentrator, which is normally used with DS2 chamber, was broken.
- Used D51 CsPad rack for concentrator and motors Februatry 2015 experiments in the SC2 (a.k.a. SC01, 100nm focus chamber).
  - cxig0715, cxie7015, cxie7515 and cxif5315
  - src = 'DetInfo(CxiDs2.0:Cspad.0)'
  - alias = DsaCsPad
  - Relative detector Z position:
    - alias = 'DsaCsPad_z'
    - pv = 'CXI:DS1:MMS:06.RBV'
  - Similarly, other relevant epicsStore aliases begin with DsaCsPad.
- The mapping of the D50 concentrator is rotated by 90 relative to the D51 concentrator.
2015-03-03 -- Moved DS2 chamber with Camera2 to DSD location
- Used for SPI experiment cxi86415
  - src = 'DetInfo(CxiDs2.0:Cspad.0)'
  - alias = DsdCsPad
  - Relative detector Z position:
    - alias = 'DsdCsPad_z'
    - pv = 'CXI:DS2:MMS:06.RBV'
- Note pipe in front DS1 chamber detector during this experiment was removed, but the holder for it was still in providing circular aperture for back DS2 detector
2015-03-17 -- Added shield and pipe and moved Camera2 to DS1 chamber
- Used for SC1 experiments starting at the end of Run10:
  - cxig0915, cxii6315, cxih0115, cxih0815, April PCS, cxih9515, cxii2415, ...
  - src = 'DetInfo(CxiDs1.0:Cspad.0)'
  - alias = DscCsPad
  - Relative detector Z position:
    - alias = 'DscCsPad_z'
    - pv = 'CXI:DS1:MMS:06.RBV'
- Detector Attenuation from shields and coatings (pipe and additional shielding required for laser experiments):
  - CsPad Pipe Al Shield Transmission:
    - 8 um thick polyimide
    - 1 um thick Al on upstream side
    - 1.75 um thick Al on downstream side
  - The detectors have 0.25 um thick Al coating.
  - --> 3 um total Al
2015-05-04 -- Removed shield and pipe from Camera2 in DS1 chamber
- Used for SC1 experiments starting with cxih8015:
  - src = 'DetInfo(CxiDs1.0:Cspad.0)'
  - alias = DscCsPad
  - Relative detector Z position:
    - alias = 'DscCsPad_z'
    - pv = 'CXI:DS1:MMS:06.RBV'

Camera2_V16_20140827

2014-08-27 -- Refurbished Camera2 installed in DS1 chamber
- Metrology:
  - 2014-08-27-CXI-DS2-Metrology.xlsx
- Quad 1 (zero based counting) reworked; metrology updated, the other 3 quads (Q0, Q2, Q3) are unchanged (as in the previous metrology: May 14, 2014).
- Used for Run 10 experiments from 2014-10-16 until it was damaged in November 2014 (cxig2614, cxif7214, cxie7914, Nov PCS)
  - src = 'DetInfo(CxiDs1.0:Cspad.0)'
  - alias = Ds1CsPad
  - Relative detector Z position:
    - no alias defined
    - pv = 'CXI:DS1:MMS:06.RBV'

Camera1_V16_20140319

2014-03-19 -- Camera1 rebuilt
- Metrology:
  - 2014-03-19-CSPAD-CXI-DS1-Metrology.xlsx
  - Quad 1 (zero based counting) reworked; metrology updated, the other 3 quads (Q0, Q2, Q3) are unchanged (as in the previous metrology: May 14, 2014).
- Used as:
  - Front detector at DSC for SC1 experiment IH Milathianaki cxii0114 (damaged asic with laser) and cxid8114
  - Moved to DSA location for SC2 chamber experiments for cxic9714 and cxid5514
  - cxid2714 (moved to back detector after Z motor issues during cxid2714)
- Info:
  - src = 'DetInfo(CxiDs1.0:Cspad.0)'
  - alias = Ds1CsPad
  - Relative detector Z position:
    - no alias defined
    - pv = 'CXI:DS1:MMS:06.RBV'

Camera1_V16_20131220

2013-12-20 -- Camera1 upgraded to V16
- Metrology:
  - 2013-12-20-CSPAD-CXI-DS1-Metrology.xlsx
- Front detector for SC1 experiments starting in January 2014 including January PCS, cxia2514, cxii0214, cxib3214, cxib6714.
  - src = 'DetInfo(CxiDs1.0:Cspad.0)'
  - alias = Ds1CsPad
  - Relative detector Z position:
    - no alias defined
    - pv = 'CXI:DS1:MMS:06.RBV

Camera2_V16_20131212

2013-12-12 -- Camera2 upgraded to V16
- Metrology:
  - 2013-12-12-CSPAD-CXI-DSD-Metrology.xlsx
- Used for experiments???.
  - src = 'DetInfo(CxiDsd.0:Cspad.0)'
  - Relative detector Z position:
    - pv = 'CXI:DS2:MMS:06.RBV'
2014-06-02 -- Ds2 chamber moved to DSC location
- Changed name from CxiDsd (36) to CxiDs2 (33) in both the cxi.cnf file and the configdb CsPad02 definition.
- Used as front detector for cxid6214, cxid9114, cxic4414, cxid5714, cxid6014, July 2014 PCS, cxic8214
  - src = 'DetInfo(CxiDs2.0:Cspad.0)'
  - Relative detector Z position:
    - pv = 'CXI:DS2:MMS:06.RBV'
- Detector upside down?

Camera3_V16_20131009

Metrology file:
- 2013-10-09-CSPAD-XPP-Metrology.xlsx
Out of vacuum camera typically used in XPP and XCS.
2014-12-17 -- Used in CXI at DG4 location in December 2014.
- XCS concentrator
- D50 MPOD power
- Detector quads rotated 90 deg
- src = 'DetInfo(CxiDg4.0:Cspad.0)'
- Relative detector Z position:
  - alias = 'Dg4CsPad_z'
  - pv = 'CXI:DG4:MMS:16.RBV '

References

Documentation on data formats

cxidb - web documentation
crystfel - page of T. A. White at DESY
cctbx - sourceforge
psana - confluence

Relevant documents, publications

cheetah - github, Anton Barty
dxtbx-the diffraction experiment toolbox, Aaron Brewster
XFEL Detectors and ImageCIF
Diffraction Geometry, D.J.Thomas
Calibration Management Tool (calibman)
CSPAD Alignment - alignment summary
psgeom - T.J. Lane converter between geometry formats in github