You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 98 Next »

 

LCLS Network Node Naming Conventions

LCLS NamingConventions
LCLS Network
SCCS Computer Account Forms
How-to Setup DHCP for an IOC

Network node names are meant to be consistent with the overall device LCLS Naming Conventions. However, the node names are separated by a dash, "-" whereas the fields of a node name is separated by a colon, ":". In addition, node names are in lower case, whereas PV names are all uppercase, due to SLC Controls System restrictions on VMS. In LCLS-II the uppercase restriction has been lifted for the attribute field of the PV name. A limitation of 24-characters is also current inforced due to a restriction on the VMS EPICS Channel Access Server. This too is  a restriction lifted for LCLS-II.

The network node name conforms to the following format: <Device Type ><Area ><Position> < Subnet >

The DeviceType Field for network devices is 2-4 characters in length and can be found in the Table 1.0. The Area Field is 4-character field, with numbers and letters and can be found in Table 1.1. Network devices, with the exception of IOCs tend to use the access building location rather than the sector, as some access buildings may server multiple sectors, such as B005.  The Position Field contains a 2-character Subsystem Prefix, followed by a 2-digit Index from 01 to 99. The Subsystem Prefix designates a subsystem of the control system as follows in Table 1.2. The Subnet Field is currently only used for a secondary NIC on the processors.  Currently this is only used for fast feedback subnet, in which "-fnet" is used.

Examples of a device name would look as follows:

Device Type

Nodename

 Comment

Access Switch

ACSW-IN20-NW01

 

Terminal Server

TS-IN20-NW01

 

Scope

SCOP-IN20-NW01

 LCLS Injector Scope

Scope

SCOP-SYS0-NW01

 LCLS Roaming Scope

Magnet IOC

IOC-IN20-MG01

 Magnet injector ioc

Magnet IOC 2nd NIC

IOC-IN20-MG01-FNET

 Magnet injector ioc feedback


To obtain an ip address for an LCLS device click here for SCCS IP/Node Name Request form. Fill out this form according the the naming conventions described herein and email this information to Charlie Granieri.

 

The Device Type Field

 

Unknown macro: {center} Table 1.0

Device Type

Description

Manufacturer

Model

ACSW

AC Switch

 

 

CHAS

Chassis

 

 

GPIB

GPIB/LAN Gateway

 

 

DDM

Digital Multimeter

Keithley

2701

RTR

Router

Cisco

 

SWH

Ethernet Switch

CISCO

 

SCOP

Scope

Tektronix

DPO4054B

TS

Terminal Server

DIGI

DIGI-TS16

UPS

Uninterruptible Power Supply

APS

 

WKUP

Walk-up ethernet connection

 

 

EIOC

Embedded IOC

NetBurner,Arcturus

Coldfire 5282, MicroC5282

IOC

IOC

Motorola

MVME6100, MVME3100

SIOC

Soft IOC

Linux Host

 

VIOC

Virtual IOC (Process)

 

 

CPU

Central Processing Unit

COMx,etc

 

PLC

Programmable Logic Controller

Allen-Bradley,Pils

 

PNA

Phase Noise Analyzer

Holzworth

 HA7062C

PSC

Ethernet Power Supply Controller

SLAC (Dave MacNair)

EPSC

CAMR

Camera for Beam Line Optics

Pulnix

 

CRAT

Intelligent VME Crates

Wiener/Dawn

 

MET

Metrology

 

 

INST

Instrument

 

 

 

 

The Area Field


The Area field is 4 characters in length. There are currently 24 areas in the LCLS Accelerator. Going from the Drive Laser to the Experimental areas they include:

Unknown macro: {center} Table 1.1

Area

Physical Location

ACR0

Accelerator Control Room (B052)

AS01

Accelerator Structure Test System(ASTA)

LI00

LINAC Sector 0

LR20

Laser Room (Upstairs, near sector 20)

LA20

FACET Laser Room (Upstairs, near Sector 20)

IN20

Injector

LI20

LINAC Sector 20

LI21

LINAC Sector 21

LI22

LINAC Sector 22

LI23

LINAC Sector 23

LI24

LINAC Sector 24

LI25

LINAC Sector 25

LI26

LINAC Sector 26

LI27

LINAC Sector 27

LI28

LINAC Sector 28

LI29

LINAC Sector 29

LI30

LINAC Sector 30

MCC0

Main Control Center (B005) OBSOLETE. Replaced by ACR0

B005Access Building 5
B052Access Building 52
B136Access Building 136
B911

Access Building 911

B912

Access Building 912

B913

Access Building 913

B921

Access Building 921

BSY0

Beam Switchyard

BSYS

Beam Switch Yard South

BSYN

Beam Switch Yard North

BSYA

Beam Switch Yart A-Line

ESA0

End Station A and Beam Dump East

BSYB

Beam Switchyard B-Line

LTU0

LINAC-to Undulator Switchyard

LTU1

LINAC-to-Undulator Line 1

UND1

Undulator on Line 1

DMP1

Beam Dump on Line 1

FEE1

Front End Enclosure on Line 1

NEH1

Near Experimental Hall on Line 1

XRT1

X-Ray Tunnel on Line 1

FEH1

Far Experimental Hall on Line 1

SYS0

LCLS System

SYS1

FACET System

SYS2

LCLS-II System

SYS3

LCLS-III System

SYS4

NLCTA System

SYS5

SPEAR System

SYS6

X-Band Test Area System

SYS7

ASTA System

SYSW

Global System West 

SYSE

Global System East

GBL0

Global to all Machines 

AS01

ASTA

XT01

X-Band Test Area

 

 

The Position Field - Subsystem Prefix

 

Unknown macro: {center} Table 1.2

Subsystem Prefix

Subsystem

LS

Laser Steering

PM

Profile Monitor

SP

Spectrometer

IM

Current Monitor

BL

Bunch Length Monitor

BP

Beam Position Monitor

MC

Motion Control

CL

Collimator

AM

Alignment Mirror

AL

Alarm Handler

LG

Data Logger

MG

Magnet

EV

Event

RF

Low-Level RF (LLRF)

KY

Klystron

MP

Machine Protection System (MPS)

NW

Network Device, terminal servers, switches routers, scopes, UPS, etc.

PP

Personnel Protection System (PPS)

BC

Beam Containment System (BCS)

TM

Temperature Monitor

TR

Toroid

VA

Vacuum

WS

Wire Scanner

FB

Beam-based Feedback

 
  • No labels