You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 2
Next »
Motor Checklist
Purpose | Base PV | Connection | pmgr | python device | Cabled? | Verified/Homed? |
---|
Standard Motors |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
JJ Slits Not in questionnaire 4 motors |
JJ Slits | MEC:TC1:MMS:[17,18] MEC:TC1:MMS:[01,02] | T5/2 and T5/8 |
|
| Yes | Yes |
Detectors Checklist (TBD)
Detector | DAQ alias | Connection | Cabled? | In DAQ? |
---|
epix10k-540k | quad_0 | - Power: Quad 0 vac cable -> Flange B3, Q0 feedthru -> air cable "epix10k quad 0" -> MPOD quad outlet 0
- Note: vac cable labeled "PDU Cable Epix10k Q0" on quad side but "epix10k quad2" on flange side.
- Fiber: using "epix10k quad 0" vacuum and air fibers. Flange B2, feedthru pair 0 -> PR60 patch panel quad port 0
| Yes | Yes |
epix10k-540k | quad_1 | - Power: TBD -> Flange B3, Q2 feedthru -> air cable "epix10k quad 2" -> MPOD quad outlet 1
- Fiber: using "epix10k quad 21 vacuum and air fibers. Flange B2, feedthru pair 2 -> PR60 patch panel quad port 2
- Note on vacuum power cables:
- Using cable "PDU Cable epix10k Q1": Minor alarm on DVDD when ON, HV error when failed to configure in the DAQ.
- There is a second cable from Phil "epix10k quad 0" that I have not tested. It is on the optical table.
| Fiber only, no power. | No |
epix10k-540k | quad_3 | - Power: Quad 3 vac cable -> Flange B3, Q3 feedthru -> air cable "C01 April 2024" -> MPOD quad outlet 3
- Fiber: using "epix10k quad 3" vacuum and air fibers. Flange B2, feedthru pair 3 -> PR60 patch panel quad port 3
| Yes | Yes |
ePix100 | SW Epix100a "epix100a_f" | - Power: Flange B3, South feedthru -> power cable E1 -> MPOD outlet 1
- Fiber: using "epix100a epix 1" vacuum and air fibers. Flange D2 (left) -> PR60 patch panel epix port 1 → MTP to daq-mec-cam01
- MECHome: "Epix 1"
- DAQ: "epix100a_1_bxrts"
| Yes | Yes |
ePix100 | NE Epix100a "epix100a_b" | - Power: Flange B3, North feedthru -> power cable E0 -> MPOD outlet 2
- Fiber: using "epix100a epix 0" vacuum and air fibers. Flange D2 (upper) -> PR60 patch panel epix port 2 → MTP to daq-mec-cam01
- MECHome: "Epix 2"
- DAQ: "epix100a_2_fxrts"
| Yes | Yes |
Andor Zyla | zyla | in-air USB/Fiber extender to daq-mec-cam02 | Yes | Yes |
XRT spectrometer | hxsss | N/A | N/A |
|