See https://confluence.slac.stanford.edu/display/MEC/L-10034+Tear-Down for photographs of in-vacuum cables.
Planned Schedule
Completed as of 8 April 2024:
- Target
- Beam Dump
9-11 April 2024:
- Monochromator Translation
- use F_XRTS MICOS XYZ cabling
- Channel cut tip/tilt
- Assign Newport channels
- 4 motors
- Si (5 3 3 ) analyzers (H+V)
- Assign IMS channels
- 6 motors
- Epix100 translation stage (vt50)
- Assign IMS channels
- 2 motors
- Si (5 3 3) analyzer1 - Z axis (vt50)
- Assign IMS channel
- 1 motor
12 April 2024:
- LPL Drive Lenses
- Using existing cabling
- 6 motors - Newport
- VISAR Lens
- Using existing cabling
- 3 motors - Newport
Motor Checklist
| Purpose | Base PV | Connection | pmgr | python device | Cabled? | Homed? |
|---|---|---|---|---|---|---|
| Standard Motors | ||||||
| LPL Drive Lenses | ||||||
| East_X | MEC:PPL:MMN:17 | T5/*1, XPS 3/1, ioc-mec-ppl-xps3 | Newport | east_x | ||
| East_Y | MEC:PPL:MMN:18 | T5/*2, XPS 3/2, ioc-mec-ppl-xps3 | Newport | east_y | ||
| East_Z | MEC:PPL:MMN:19 | T5/*3, XPS 3/3, ioc-mec-ppl-xps3 | Newport | east_z | ||
| West_X | MEC:PPL:MMN:20 | T5/*4, XPS 3/4, ioc-mec-ppl-xps3 | Newport | west_x | ||
| West_Y | MEC:PPL:MMN:21 | T5/*5, XPS 3/5, ioc-mec-ppl-xps3 | Newport | west_y | ||
| West_Z | MEC:PPL:MMN:22 | T5/*6, XPS 3/6, ioc-mec-ppl-xps3 | Newport | west_z | ||
| VISAR Lens | ||||||
| VISAR_X | MEC:PPL:MMN:32 | VacCable 9, T6/DB25-1, AirCable "XPS DelayStage", XPS 4/8, ioc-mec-ppl-xps4 | Newport | visar_x | ||
| VISAR_Y | MEC:PPL:MMN:31 | VacCable 2, T6/DB25-2, AirCable "XPS2 #4", XPS 4/7, ioc-mec-ppl-xps4 | Newport | visar_y | ||
| VISAR_Z | MEC:PPL:MMN:28 | VacCable 10, T6/5, AirCable "XPS2 #3/XPS2 #1", XPS 4/3, ioc-mec-ppl-xps4 | Newport | visar_z | ||
| Target | ||||||
| TC_hexapod | IOC:MEC:HEX1 | B4/L8 | Hexapod | pending ECS-4500 - Getting issue details... STATUS | Yes | |
| Target_X | MEC:USR:MMS:17 | D2/D5 MF? moxa-mec-09:4001 (R62 E15), ioc-mec-usrppl-ims | PLS-85 Sample S | target_x | Yes | |
| Beam Dump | ||||||
| Zyla_500mm | MEC:PPL:MMN:08 | in-air to beam dump, XPS 1/8, ioc-mec-ppl-xps1 | Newport | zyla_z | Yes | Yes |
JJ Slits Not in questionnaire 4 motors | ||||||
| JJ Slits | MEC:TC1:MMS:[17,18] MEC:TC1:MMS:[01,02] | T5/2 and T5/8 | ||||
| Experiment Specific Motors | ||||||
Fast Diode Not in questionnaire 2 motors | ||||||
| Diode_Z | MEC:PPL:MMN:29 | VacCable 5, T6/7, AirCable "XPS3 #7", XPS 4/5, ioc-mec-ppl-xps4 | Newport | diode_z | ||
| Diode_Y | MEC:PPL:MMN:30 | VacCable 11, Flange B5, port B2, AirCable "XPS1 #4", XPS 4/6, ioc-mec-ppl-xps4 | Newport | diode_y | ||
Monochromator Translation From questionnaire: Mono_[XYZ] 3 motors | ||||||
Mono X
| MEC:TC1:MMS:09 | D2/D5 MF? digi-mec-07:2111 (R64A E19), ioc-mec-tc1-xuv-ims | XUV X | mono_x | ||
Mono Y
| MEC:TC1:MMS:08 | D2/D5 MF? digi-mec-07:2110 (R64A E19), ioc-mec-tc1-xuv-ims | XUV Y | mono_y | ||
Mono Z
| MEC:TC1:MMS:07 | D2/D5 MF? digi-mec-07:2109 (R64A E19), ioc-mec-tc1-xuv-ims | XUV Z | mono_z | ||
Si (5 3 3) analyzers - Dumb Motors (H + V) From questionnaire: Analyzer[123]_[HV] 6 motors | ||||||
| MEC:TC1:MMS:22 | T5/5 MF? moxa-mec-09:4005 (R62 E15), ioc-mec-tc1-vt50-ims | |||||
| MEC:TC1:MMS:22 | T5/5 MF? moxa-mec-09:4005 (R62 E15), ioc-mec-tc1-vt50-ims | |||||
| MEC:TC1:MMS:22 | T5/5 MF? moxa-mec-09:4005 (R62 E15), ioc-mec-tc1-vt50-ims | |||||
| MEC:TC1:MMS:22 | T5/5 MF? moxa-mec-09:4005 (R62 E15), ioc-mec-tc1-vt50-ims | |||||
| MEC:TC1:MMS:22 | T5/5 MF? moxa-mec-09:4005 (R62 E15), ioc-mec-tc1-vt50-ims | |||||
| MEC:TC1:MMS:22 | T5/5 MF? moxa-mec-09:4005 (R62 E15), ioc-mec-tc1-vt50-ims | |||||
Si (5 3 3) analyzer1 - Z axis (VT 50) From questionnaire: Analyzer1_Z 1 motors | ||||||
| MEC:TC1:MMS:22 | T5/5 MF? moxa-mec-09:4005 (R62 E15), ioc-mec-tc1-vt50-ims | VT-50-100 | block_z | |||
Channel cut tip/tilt - Newport (H + V) From questionnaire: Mono1_[HV], Mono2_[HV] 4 motors | ||||||
| Mono1_H |
| mono1_h (tip/tilt) | ||||
| Mono1_V |
| mono1_v (tip/tilt) | ||||
| Mono2_H |
| mono2_h (tip/tilt) | ||||
| Mono2_V |
| mono2_v (tip/tilt) | ||||
ePix100 - Translation stage (VT50) From questionnaire: Detector[12]_Z 2 motors | ||||||
| Detector1_Z |
| VT-50-55 | detector1_z | |||
| Detector2_Z |
| VT-50-55 | detector2_z | |||
Channels used in Gregori L-10034 (Inventory of existing Newport and IMS cabling) | ||||||
| ||||||
|
| |||||
| ||||||
| ||||||
| ||||||
Detectors Checklist (TBD)
| Detector | DAQ alias | Connection | Cabled? | In DAQ? |
|---|---|---|---|---|
| epix10k-540k | quad_0 | Fiber:
Power: B3/Quad 0 | ||
| epix10k-540k | quad_2 | Details worked out with Detectors Group.
| ||
| epix10k-540k | quad_3 | Fiber:
Power: B3/Quad 3 | ||
| ePix100 | epix100a_1_bxrts | Planned: Fiber pair from Flange D2d, power from the South epix-PDU feedthru on B3.
| ||
| ePix100 | epix100a_2_fxrts | Planned: Fiber pair from Flange B2 Quad 2 (#5/#6), power from North epix-PDU feedthru on B3.
| ||
| ||||
| Andor Zyla | zyla | in-air USB/Fiber extender to daq-mec-cam02 | Yes | Yes |
| VISAR 1 | visar_1 | Network connection with Windows PC ioc-mec-visar1 | Yes | Yes Not tested right now since under regular use |
| VISAR_2 | visar_2 | Network connection with WIndows PC ioc-mec-visar2 | Yes | Yes Not tested right now since under regular use |
| Timing diode | PVs are:
| B3 ioc-mec-qadc. Timing fiber connected. Diode signal into A1 with SMA/Male - SSMC/Female Coaxial Jumper Cable and VLM-83-2W-S+ limiter. | Yes | qadc134 IOC is running. Here is how to display: PCIe Quad ADC Digitizer Boards (QADC and QADC134) - needs to be updated, see ECS-4919 - Getting issue details... STATUS . 27 March 2024: Diode is placed close to target during VISAR shots. Under test. |
| XRT spectrometer | hxsss | N/A | N/A |