| Step | What | config | I/II | beam? | fixed/autoranged | AMI/offline? | metrics | how | notes | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 pedestals | both | no - be sure not | both | both | Compare offline to expectations. Compare makeped bad pixels to expectations. Check switch point | documentation | |||||
| plain dark | fixed (both???) | check noise w/w/o autoranging | existing script | ||||||||
| forced low dark | auto | compare pedestal level to expectation | documentation | ||||||||
| charge injection | both | no | both | offline | check switchpoint | existing script | |||||
| Blunt autoranging test | both | intensity scan | auto | both | Look for negative pixels in AMI (calib) Look offline for negative pixels | existing script | |||||
| Persistence check | both | yes | both | offline | Look at dropped shots | existing script | watch out for heating Ideally with features like rings | ||||
| Intensity scans | yes | both | offline | linearity in fixed modes hockey stick procedure | understand wave8 | ||||||
| Masked xtalk check | yes | both? | |||||||||
| timing scan | yes | both | |||||||||
| Bias plateau | |||||||||||
| T sensitivity | reduce cooling | not a common test | |||||||||
| Different DAQ rate | could repeat all the above... | ||||||||||
Overview
Content Tools