Using Rohde & Schwarz HMP2020 power supply
Make sure output is off
The SMA-F input labeled CONTROL is limited from 0V to 10V. This voltage is used to set the gain of the pulse. If you want a pulse of ~10V, then set V_CONTROL = 1V
→
| Steps |
|
---|
1 | Hit Menu |
|
2 | Down arrow to "Over Voltage Protection (OVP) |
|
3 | Right arrow to select OVP |
|
4 | Use arrows and/or scroll wheal to set for CH1: 10V | ← Max voltage CONTROL Port can take |
|
|
|