Host Configuration
Notes (31 October 2022; peregrin)
- R3.7.0/R1.3.0 is required for:
- MakoG032B cameras #7-#15, #34-#35: support added in common/R3.7.0.
- MantaG033B cameras #29-#33: configuration files added in mec/R1.3.0.
- common/R3.7.0 is only supported for RHEL7 hosts
- Build R3.3.0/R1.1.1 is used for RHEL5 hosts:
- This is deprecated.
- But can be used for non-MakoG032B cameras that have camera numbers < 29..
- ioc-mec-las-evr-01 (RHEL7) is already hosting
- ioc-mec-las-evr-01
- ioc-mec-spec-01, 02, 03, and 04
- so removed from use as a GigE host (for now)
| Host | OS | gigECam:common/mec | Comments | gigE Cameras | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ioc-mec-las-gige01 | RHEL7 | R3.7.0/R1.3.0 | MakoG032B cameras | 7 | 8 | 9 | 10 | 11 | 12 | |
| ioc-mec-las-gige02 | RHEL7 | R3.7.0/R1.3.0 | MakoG032B cameras; 2 MantaG033B cameras. | 13 | 14 | 15 | 34 | 35 | 24 | 27 |
| ioc-mec-las-gige03 | RHEL7 | R3.7.0/R1.3.0 | MantaG033B cameras; #28-#33 new to MEC. | 28 | 29 | 30 | 31 | 32 | 33 | |
| ioc-mec-las-gige04 | RHEL7 | R3.7.0/R1.3.0 | 1 MantaG033B camera; 5 MantaG046B cameras | 16 | 17 | 18 | 19 | 20 | 21 | |
| ioc-mec-las-evr-01 | RHEL7 | Used for non-GiGE IOCs | ||||||||
ioc-mec-gige01 | RHEL5 | No IOCs for now. | 1 | 2 | ||||||
| ioc-mec-imb02 | RHEL5 | R3.3.0/R1.1.1 | MantaG033B cameras | 22 | 23 | 25 | 26 | |||
| ioc-mec-ipimb01 | RHEL5 | R3.3.0/R1.1.1 | 3 MantaG145B cameras; 1 MantaG201B camera; 2 MantaG046B cameras | 3 | 4 | 5 | 6 | |||
Camera Aliases (as given in camviewer.cfg)
Table 1
| Camera number | Camera alias | Category | Comments |
|---|---|---|---|
| 1 | GigE1_Questar1 | Target Chamber | on. |
| 2 | GigE2_Questar2 | Target Chamber | on |
| 3 | GigE3 | Target Chamber | Off |
| 4 | GigE4 | Target Chamber | Off |
| 5 | GigE5_TimeTool | Target Chamber | On |
| 6 | GigE6 | Target Chamber | Off |
| 7 | SPL_TC_Alignment | Target Chamber | Dedicated to the SPL alignment platforms On. |
| 8 | XRay_Imaging | Beamline | On |
| 9 | GigE9 | Unknown | Off |
| 10 | DEAD_MakoG032B | DEAD | Returned frames are blank (all 0) |
| 11 | MEC_LPL_1 | Laser | Off |
| 12 | MEC_TC_800nm | Target Chamber | Off |
| 13 | MEC_YAG3 | Beamline | On. |
| 14 | MEC_YAG1 | Beamline | Located in XRT. On |
| 15 | MEC_YAG4 | Beamline | On. |
| 16 | MEC_SPL_8 | Laser | Yes. |
| 17 | MPA2Xtal | Target Chamber | On |
| 18 | VISAR1 | Target Chamber | On |
| 19 | VISAR2 | Target Chamber | On |
| 20 | VISAR3 | Target Chamber | ON |
(Continued)
Table 2
| Camera number | Camera alias | Category | Comments |
|---|---|---|---|
| 21 | VISAR4 | Target Chamber | On |
| 22 | StrinA | Laser | On |
| 23 | MPA1In | Laser | On |
| 24 | Regen | Laser | On |
| 25 | MPA1Out | Laser | On |
| 26 | MPA2In | Laser | Off |
| 27 | MPA2Out | Laser | On |
| 28 | StrinB | Laser | On |
| 29 | SPFloat1 | Laser | On |
| 30 | CompOutFF | Laser | SPL Compressor On |
| 31 | CompOutNF | Laser | SPL Compressor On |
| 32 | CompInFF | Laser | SPL Compressor On |
| 33 | CompInNF | Laser | SPL Compressor On |
| 34 | TTin | Laser | Off |
| 35 | TTout | Laser | On |
| 36 | |||
| 37 | |||
| 38 | |||
| 39 | |||
| 40 |