Summary
We routed the connections in the server area of the Klystron Gallery that corresponded to the radiation monitors in beam dump table to a server module so that we can access the live radiation readings from S20 trailer.
There are four radiation monitors placed near cameras near the end of the FACET-II tunnel so that they can tell us which areas around the beam dump area are potentially hazardous for cameras.
We placed a dosimeter near each RADFET to serve as a callibration device. A fifth dosimeter is kept as a control in my desk drawer (B52-315B.26).
(TLDR: Added DOSFET to controls network)
See network info at bottom of page.
Locations
RADFETS
Old Pictures:
Cable Connections in Tunnel
Server Room Connections
Klystron Gallery server area near S20 trailer
| FKG20-20 | FKG20-2335 | FKG20-24 |
|---|---|---|
|  |  |
Network Info:
Name: radm-li20-rm01
IP: 172.27.76.21
VLAN : FACETINST (719)
MAC: 00:80:A3:A1:81:0B
Added to DHCP: Yes
Location: FKG20-2335
Switch : SWH:LI20:NW02
Port : 2/0/38, (Switch 2, port 38)
Data Readout:
- ssh mcclogin
- Enter password
- ssh fphysics@facet-srv01
- Select account
- facethome
- LI20 – Experimenter
- Click on "RadFET" button in lower right corner
- If needed click on "Config" in top right