You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Installing Python 2.5.1 (built against tcltk 8.4) for Linux

  1. Download Python 2.5.1 from http://www.python.org/download/releases/2.5.1/
  2. Unzip and change to the directory of the unpacked archive, E.g.,
    • tar -zxvf  Python-2.5.1.tgz
    • cd Python-2.5.1
  3. *Run, "./configure --prefix=<installation directory>":
    • ./configure --prefix=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit/python/2.5.1-gl1/gcc34/ 
  4. Edit the file, "Setup," in the "Modules" directory, "Modules/Setup"
    • Enable zlib (Uncomment the line corresponding to "zlib")
    • To build Python against tcltck 8.4, there are three lines to edit in the file (I would suggest searching for "_tkinter" in the Modules/Setup file, then following the documentation)
      1. Enable tkinter, by Uncommenting the line "_tkinter _tkinter.c tkappinit.c -DWITH_APPINIT "
      2. Uncomment and edit to reflect where your Tcl/Tk libraries are, example
        • "-L/afs/slac.stanford.edu/g/glast/applications/heasoft/PROD/tcltk/i686-pc-linux-gnu-libc2.3.2/lib"
      3. Uncomment and edit to reflect where your Tcl/Tk headers are
      4. Uncomment and edit to reflect your Tcl/Tk versions are
  5. Run,
    • make
    • make install

* Step 3 must be done before 4.   Running, "./configure," generates the file Modules/Setup 

While running "make", if you run into any problems finding tcl8.4 or tk8.4 libraries, try setting the environment variable, LD_RUN_PATH to point to the location of the tcltk libraries:
make clean
setenv LD_RUN_PATH <Location of tcltk libraries>
make
make install
unsetenv LD_RUN_PATH 

Installing Python 2.5.1 (built against tcltk 8.4) for Windows

  1. Download the appropriate python2.5.1 msi file for your windows architecture http://www.python.org/download/releases/2.5.1/
  2. Using command.exe, enter the following command
    • if installing on a network drive
      • msiexec /a <python-msi-path>/python-2.5.1.msi ALLUSERS=1 TARGETDIR=<installation director
    • Example, to install python in "V:\Glast_Software\Toaster\GLAST_EXT\Windows-i386-32bit\python\2.5.1-gl1\vcc71" logged in on glast06, enter
      •  msiexec /a V:\Glast_Software\Toaster\GLAST_EXT\VC8\python\python-2.5.1.msi ALLUSERS=1 TARGETDIR="V:\Glast_Software\Toaster\GLAST_EXT\Windows-i386-32bit\python\2.5.1-gl1\vcc71"
  • No labels