Software setup:

in order to run the rayonix in the DAQ, here are the steps:

  1.  ssh mfxopr@mfx-control  from psdev
  2. ssh hsuser@con-ics-mfx-rayonix
  3. kill capxure (ps -auwx |grep capxure, and kill the process)
  4. cd ~/slac
  5. ./startDaqInterface_newcraydl

If experiment plans to use 4x4 binned mode, confirm that ev code 42 is selected for 30Hz operation.

At this point, the hutch POC should be able to run the rayonix in the DAQ.

  • No labels