The EDM GUI is accessed from TMO home, it is available under the specific IP, e.g. LAMP/CVMI/MRCO etc

This should bring up an EDM screen (this will, hopefully, look more better during normal operations with no disconnected (pink) PVs. Currently only 3 cards are installed).

Pull up the particular module you are interested in accessing to view HV card status diagnostics, and to set voltages and currents. In this module page the top half is all the useful diagnostic information. A functioning happy card should have "isMODgd" active, and "isEVNTact" NOT be active.

Example of an unhappy channel because the safety loop is tripped, the difference is subtle but it's there, 10 points if you can spot it.

Now what are all these pesky error codes anyway? You can see for yourself in this screenshot of error info pulled from this manual. 


  • No labels