20190419

L0M22 half module with pinholes pulled

 

High Voltage Test

    (V)    (uA)

    V:D/I:D

    50    0.43

    100    0.67

    200    0.89

    300    1.10

    400    1.58

    475    

    current increased above 20uA when ramping from 400 to 500. Went down to 470, and current went to about 9 uA immediately, then decayed to 3 uA after about 1 minute wait. Able to ramp *slowly* (5V steps) to 500V. At 500V, current hit 20uA and then decayed to below 8 uA after about 1 min.

    500    2.50 after 5 minutes

 

 

Low Voltage Test

    (V)    (A)

    V:D/I:D

Pre-Config

AVDD:    2.50    0.106

DVDD:    2.50    0.245

V125:    1.25    0.000

 

Post-Config

AVDD:    2.50    0.262

DVDD:    2.50    0.245

V125:    1.25    0.230

 

Bad Channel Table

    Sector B    Sector A

    pCH |    apvCH    |   128+apvCH    |   2*128-apvCH-1|  128-apvCH-1

    APV0

    0   |    0   |    128 |    255 |    127

    49  |    49  |    177 |    206 |    78

    50  |    50  |    178 |    205 |    77

    APV1

    225 |    97  |    225 |    158 |    30

    APV2

    256 |    0   |    128 |    255 |    127

    286 |    30  |    158 |    225 |    97

    359 |    103 |    231 |    152 |    24

    APV3

    410 |    26  |    154 |    229 |    101

    424 |    40  |    168 |    215 |    87

    511 |    127 |    255 |    128 |    0

    Nlow: 10

 

 0V Bias:

50V Bias:

  • No labels