You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Current »

Agenda:

  1. Test Pass2 -  Output, issues, first looks                                              – Rafo + All analyzers.
  2. Test Pass2 -  Do we want/need FEE skims? If so, what selection criteria would be most useful? What purpose would they serve? Do we need them for all runs? – All
  3. Pushing towards a full MC for 2019 and getting reach estimates.      – Matt Solt
    1. Run 7988 Plots
  4. Towards merging the new readout.                                                    – Kyle
  5. Other Business?

Action items:

  • Analyze the existing 10% unblinded data!
  • Rafo will confirm with Stepan the beam energy:  4.55 GeV. 
  • Once that is known, Takashi can start generating the Madgraph input events.
  • We will need to check that a field map exists for that beam energy. If not, generate a new one. Make sure detector is using the correct field map.
  • Matt S. will place the sensors in the correct positions (L1-L3) and verify.
    • There is still some question about the optimal lateral placement of the L0 sensors. Will start with nominal.
  • Once that is done, Takashi can put the generated MC through SLIC.
  • Kyle and Matt G. will verify the new readout code.
  • Omar and Jeremy will update the conditions database.
  • Once these things are done, we can run the slic output through the readout simulation. This step is the most complicated and will probably be the bottleneck.
  • Matt S. will make a driver that masks out some strips in L0 (and L1?) of the SVT. Then Takashi can run the MC through the recon (both nominal configuration, and the one with masked strips).
  • MC production is complete, Matt S. makes a reach plot with intermediate plots

 


 



  • No labels