Login

In order to work with data on shared memory one has to login on specific monitoring node which is set in sxr experiment configuration file. Currently monitoring node is daq-sxr-mon06. It can be accessed through the chain of nodes (depending on where you are now):

ssh -Y [<user-login-name>@]psdev
e.g.-> dubrovin@psdev7a

ssh -Y [<user-login-name>@]sxr-daq
e.g.-> dubrovin@sxr-daq

ssh -Y [<user-login-name>@]daq-sxr-mon06
e.g.-> dubrovin@daq-sxr-mon06

Make sure that your login name have a permission to see xtc and calib data for your experiment, e.g.

ls /reg/d/psdm/SXR/sxrx22915/xtc/
ls /reg/d/psdm/SXR/sxrx22915/calib/
see the list of files w/o permission issues or check permission directly
id <username>
getfacl /reg/d/psdm/SXR/sxrx22915/xtc/

If you can't see xtc files or calib directory, talk to POC.

Setup environment

source /reg/g/psdm/bin/conda_setup
source conda_setup --reldir /reg/neh/home/dubrovin/LCLS/con-ana-1.2.12-emon

First command sets regular psana-conda environment for current default release.  Second command is required in current development mode to use updated version of code on the top of stable release con-ana-1.2.12.

Run application

cd <any-directory>
emon

Application saves/reads a file with configuration parameters in local directory (should have write/read permission).
The file with configuration parameters makes life easy at restart application - most of parameters selected in previous session are already defined.

Main control window started from scratch and with configured fields:

Set application configuration parameters in main GUI

• Exp:Select ->
• Run -> 2
• Ext -> shmem ### make sure that daq is running or use None to load data from xtc file
• Select one of three monitor tabs, e.g. Mon-A
  • Det1: -> GMD, WF or Area -> View -> scroll/drug for signal, set ROI Signal; scroll/drug for background, set ROI Background,
  • Det2: -> GMD, WF or Area -> View -> ...
• Select one of three monitor tabs, e.g. Mon-B
  • Det1: ->...
  • Det2: ->...

• Events update (type in (int) number ~100 or 200)

• Start

Saved files

At exit emon saves a couple of useful files with configuration parameters and session log-file:

./emon-confpars.txt
/reg/g/psdm/logs/emon/2017/06/<log-file>.txt 

What if something does not work?

This is a new app, so it is not perfect and some glitches are very possible. Many protections for different situation are included, but most likely not all. Below is a most probable list of problems with recommendations what to do if it happens.