You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

xtcexplorer (GUI interface to pyana)

The latest tag is V00-01-31.

This is a description and documentation of a GUI tool to explore the XTC data (see Analysis Workbook. Data Formats). The executable is named xtcexplorer, and the software package is named XtcExplorer. The GUI is written in Python/PyQt, while the data is extracted using the LCLS framework pyana (we're currently in process of switching to using psana for this). Visualization of data is obtaned with the plotting package matplotlib, while much of the data algorithms in python relies on NumPy / SciPy libraries.

XTC files contain the raw data (datagrams) streamed from the DAQ online system. The datagrams occur in the order they were flushed from the DAQ system, and thus do not necessarily appear in chronological order. The datagrams are not indexed, so the file must be read sequentially. The pyana and psana frameworks are designed to process these datagrams and present them to you shot by shot (or event by event, in pyana/psana terminology).

For a similar tool to explore the HDF5 data format, look at HDF5 Explorer - Old.

How to get started

  1. Set up your release work directory:
    You should always run this code from your own release working directory.
    See Account Setup for more details on how to set up the analysis environment:
    [user@pslogin ~] newrel ana-current myrelease
    [user@pslogin ~] cd myrelease
    [user@pslogin myrelease] sit_setup
    

  2. Check out the XtcExplorer package from the SVN software repository:
    This step is optional. But without it, you will not be able to edit/customize any source files.
    You need an afs token to check out the package, which on pslogin is automatic (I think), but if you're on psananeh/psanafeh, issue a kinit command first:
    [user@pslogin myrelease] kinit
    Password for user@SLAC.STANFORD.EDU:
    
    Now you're ready to check out the package and "compile":
    [user@pslogin myrelease] addpkg XtcExplorer
    [user@pslogin myrelease] scons
    
    Note! You can also do 'addpkg XtcExplorer VXX-XX-XX' to get a specific version of the package, or 'addpkg XtcExplorer HEAD' to get the very latest version.

  3. Run the program:
    Launch the GUI with the command 'xtcexplorer' and optionaly give the input xtc files that you want to read
    as arguments. You can also browse to find files after launching the browser.

    To have access to the xtc files, you need to login to psananeh/psanafeh for this:
    [user@psanaXXX myrelease] sit_setup
    [user@psanaXXX myrelease] xtcexplorer /reg/d/psdm/CXI/cxi22010/xtc/e60-r0465-s0*
    
  • If you encounter any problems, ask for help! Don't be stuck. This is supposed to be easy. If it's not, I did something wrong, so let me know! (smile) Send us an e-mail (pcds-help at slac.stanford.edu)

  • xtcexplorer writes out pyana configuration files, based on selections made in the GUI. Look out for files with names xb_pyana_XXXX.cfg, where XXXX is a random four-digit number. You can use them to run pyana directly from the command line. But they accumulate, so you might want to remove these regularly...

  • LCLS data is very diverse, and not all features for all detectors are implemented (yet). Feel free to contact me if you have requests and suggestions.

Description of the GUIs

The following documentation describes XtcExplorer V00-01-31. For earlier versions, see earlier versions of this confluence page (go to "Tools" -> "Page history").

LCLS XTC Explorer

Typing xtcexplorer will launch the main GUI, which looks something like this:

You need to connect an XTC file in order to get any further. You have 4 options:

  1. You can give file names as arguments on the command line, and the file will automatically be opened/connected< e.g. xtcexplorer /reg/d/psdm/CXI/cxi22010/xtc/e60-r0465-s0*
  2. If you know the Instrument / Experiment number / run number you'd like to investigate, simply select from the pull-down menus.
  3. There's also a 'File Browser' that allows you to browse for the files you want. Be aware that many runs are split into several files, in chunks and streams, and to get a complete dataset you do need to use all of the files for a given run. It will probably 'work' for single files too, but we cannot guarantee completely synchronized date, in particular, EPICS data is stored at a different rate than 'event' (shot) data, so if you make use of EPICS PV data, use the complete dataset.
  4. Finally, you have the option of adding file names by hand.

Once a file or more has been connected, another GUI will pop up  (possibly after a short delay while the file(s) content is being investigated). This GUI displays information about the file content and help with further processing of the data in pyana.

Pyana Control Center

The new GUI (Pyana Control Center) will show you a list of detectors/devices found in the file. A little more information is written to the terminal window too.

The Pyana Control Center.

In the pyana control center, select general run options and plot options from the panel to the right, and detectors/devices from the list to the left. Once you checkmark the detectors, a new "Pyana Configuration" tab pops up over the run/plot option panel. You can always go back to the "General Settings" tab.

"General Settings" have two components: run options (number of events to run, to skip, and multiprocessing), and plot options (frequency of plotting, display mode, ipython at end job).

A note on multiprocessing: You are allowed to select how many CPUs to use, mostly to advertise this possibility when running pyana. It is not possible to interact with all subprocesses, so the XtcExplorer will only be able to make plots from one of the subprocesses.

Some more information is printed to the terminal window from which the xtcexplorer was launched

Once you checkmark the detectors you want to display information from, another tab will pop up showing pyana configuration text. "Current pyana configuration": as you select devices from the list, a tentative configuration file for running pyana is written and shown in this field.

If a ControlPV is present and checked off, only a pyana_scan module will be used. All the other devices you check will be added to the input of the scan.
If no ControlPV is used, other pyana modules will be configured as appropriate to display a variety of information from the events.
If "Epics Process Variables" are checked off, another Gui appears that lists all the epics variables. Select the ones you want to display.

Press the "Write configuration to file" button once you're done. Once a file is written, a "Run pyana" button will appear.

You can further edit the configuration file by hand. If you click on "Edit configuration", the file will open in the default editor. Note! The default editor is defined in your EDITOR environment variable. Make sure it is set to your editor of choice (e.g. setenv EDITOR emacs).

"Run pyana" lauches an input GUI that shows you the runstring. You can use the same runstring from the command line. Or hit "OK" and it'll run.

After launching pyana, another button "Quit pyana" appears... If you see you need to change parameters, you can stop pyana, edit the configuration file, and start over again.

More information on how to run pyana by itself (see 'pyana -h' for more help, or the pyana section of confluence).

The pyana modules

The GUI as described above prepares a configuration file for you to run pyana. You can either run it from the GUI or you can run it from the command line. The configfile sets input parameters for the pyana modules in this package. Feel free to use one or more of these modules as a starting point for your more elaborate pyana analysis!

XtcExplorer/src/pyana_bld.py          # display of Beam-line data
XtcExplorer/src/pyana_epics.py        # display of Epics PV data
XtcExplorer/src/pyana_scan.py         # display of motor scan data
XtcExplorer/src/pyana_encoder.py      # display of encoder data
XtcExplorer/src/pyana_ipimb.py        # display of diode data from IPIMB and PIM
XtcExplorer/src/pyana_waveform.py     # display of waveform data
XtcExplorer/src/pyana_image.py        # display of camera image data
XtcExplorer/src/pyana_plotter.py      # a plotter module to control the event display

Additional helper classes and functions are defined in

XtcExplorer/src/utilities.py          # PyanaOptions                              - help parse options
                                      # BaseData and classes derived thereof      - store numpy arrays for ipython
                                      # Threshold                                 - keep track of threshold values and region of interest
                                      # Frame                                     - container for a single "plot"
                                      # Plotter                                   - container for a single "canvas"

XtcExplorer/src/cspad.py              # CsPad                                     - for arranging & aligning the CsPad elements

These are imported into the pyana modules wherever needed. You might want to keep this in mind when
using examples from this package. The pyana modules can mostly be run on their own, but they might
need to import this module.


A few things to note about the different detectors / pyana modules:

Common configuration parameters

A few parameters are common to all modules, and their default values are set to be the same, but can also be set individually for each module. They are the following:

# parameter name   default value   comment
  plot_every_n      = 100         # If 0, plot only at the end. Else, display every N events
  accumulate_n      = 0           # If 0, accumulate all (no reset). Else, reset stored arrays every N events
  fignum            = 1           # matplotlib figure number

pyana_plotter

This module is added to the end of the job, after other modules. It controls the display mode and ipython.

  • The default display mode is SlideShow mode, where the plot window stays open but updates every n events. In Interactive mode, the figure window must be closed before the next event gets processed. The other modules are set up to work with this one, but should with minor modifications also run fine without it. (The minor modifications would be to issue a "plt.ion()" before the figures are created or replace "plt.draw()" with "plt.show()" to make sure the plot windows stay open.)
  • There's also a handle to allow you to use ipython at the end of the job (or after each plot) to investigate your plottet arrays further.
      display_mode      = 2           #  Interactive (1) or SlideShow (2) or NoDisplay (0)
      ipython           = False       #  Drop into ipython after each plot (to allow further investigation of data)
    

pyana_bld

This module collects data from the BeamLine Detectors (Bld) and plots them in separate windows.

 do_ebeam           = False       #  Plot data from EBeam object
 do_gasdetector     = False       #  Plot data from GasDetector
 do_phasecavity     = False       #  Plot data from PhaseCavity
 do_ipimb           = False       #  Plot data from SharedIpimb  (No longer used, see pyana_ipimb)

Example of how to run this pyana module by itself, i.e. no GUI, processing 300 shots and using an xtcexplorer-generated config file:

pyana -n 300 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_bld -m XtcExplorer.pyana_plotter <xtc files>

pyana_waveform

Plots waveform data from Acqiris digitizers. Takes a list of addresses, currently will make one plot for each channel of each device. Plan to add more options.

Configurable options:

  sources           =             # string, space-separated list of addresses (Detector-Id|Device-ID)
  quantities        =             # string containing quantities to plot. "average stack single"

Example how to run this pyana module by itself, i.e. no GUI, processing 300 events and using an xtcexplorer-generated config file:

pyana -n 300 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_waveform -m XtcExplorer.pyana_ploter <xtc files>

Or if you add "plt.ion()" to the constructor for SlideShow mode OR "plt.show()" to make_plot functions for interactive plots:

pyana -n 300 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_waveform <xtc files>

pyana_image

This module deals with all camera images, including CsPad images.

  • Load dark image from a file for background subtraction
  • Filter events: the 'threshold' parameter holds settings for filtering events based on image values. Specify keywords=value separated by whitespaces, e.g.
    • 'lower=400.0 upper=1600.0 type=maximum roi=(200:300,100:400)' which will filter out events that have the maximum pixel in the region of interest below 400 or above 1600.
    • 'lower=500 type=average' will filter out events that have average pixel value in the whole image below 500.
  • Apply algorithms to an image (e.g. rotation, shift, etc)
  • Display and/or save the image, a background subtacted image, an average image, an image with algorithms applied... etc.
  • Save the average image(s) or selected single-shot images (up to a maximum) to file
  • In Interactive mode (see pyana_plotter), some interaction with the plot is possible:
    • change intensity range (color range) by left-clicking to set low limit, right-clicking to set high limit, middle-click to reset to full scale.
    • change threshold value and region of interest if a ROI was defined: Click on the rectangle, enter new values when prompted in terminal window
    • switch to SlideShow mode when you are content with the display: Middle-click on the canvas and enter new display mode value (2 for SlideShow).

Options must be specified in a configuration file. Only the sources parameter is required.

  sources      =        # string, Address of Detector-Id|Device-ID
  inputdark    =        # filename of a binary numpy (.npy) with dark image for subtraction
  threshold    =        # Threshold information, specify the keywords that apply: lower=value, upper=value, type=maximum (default) or average, roi=(xmin:xmax,ymin:ymax)'
  algorithms   =        # algorithms to be applied to the image, e.g.: 'rotate:30' to rotate 30 degrees, or shift:(300,200) to shift by (nrows,ncols).
  quantities   =        # quantities to plot or save, e.g. 'image dark average maximum'
  plot_vrange  =        # range (format vmin:vmax) of values for plotting (pixel intensity)
  show_projections =    # bool, include projections onto x,y axes, or not.
  outputfile   =        # base name for output file.
  max_save     = 0      # if larger than zero, will save event images in separate files, up to maximum.
  calib_path   = None   # path to calib directory (Currently only needed for CSPad)

CsPad image where the region of interest (a red rectangle in the left figure) has intensity above a given threshold. The right image shows the region of interest.

CsPad image where region of interest (red rectangle) has intensity above a given threshold. Additionally, a dark-subtracted image is shown (bottom left), where the dark average is based on below-threshold shots from the same run (shown bottom right.

This image is similar to the one above. The intensity limits have been adjusted interactively.

At the end of the job, the average of good images (left) and rejected / dark images (right) is shown.

Image from two Pulinx cameras, no filtering or background subtraction. Projections in x and y are shown.

Displays of three different Pulnix TM6740 images of YAG screens, after rotation/translation. Also shown, differences between images and FFT of differences.

Display of images from Princeton camera. Plotted at end of job of average images above threshold, and average images below threshold (dark). A red rectangle shows the region of interest that was used to evaluate intensity w.r.t. threshold. Configuration: 'threshold = 350 (700:800,1100:1200)'

Example of how to run this pyana module by itself, i.e. no GUI, processing 10 events and using an xtcexplorer-generated config file:

pyana -n 10 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_image -m XtcExplorer.pyana_plotter <xtc files>

pyana_ipimb

This module extracts and displays data from IPIMB type detectors, monitoring boards with four diodes each.
The datastream contains two types of information: IpimbData (raw data) and IpmFex (feature extracted data).
What exactly to display is defined in pyana_ipimb.py, but the plotting is done by the DataDisplay object in the displaytools.py library.
This is currently being revised, and has some shortcomings that will be fixed shortly. Currently only one or two diode sources can be displayed at a given time.

sources     # list of IPIMB addresses
quantities  # keywords defining what gets stored. Currently the module stores "everything", so this can be ignored.


Example of how to run this pyana module by itself, i.e. no GUI, processing 300 events and using an xtcexplorer-generated config file:

pyana -n 300 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_ipimb -m XtcExplorer.pyana_plotter <xtc files>

pyana_epics

pv                  # Name(s) of the EPICS PV(s) to dump

Example of how to run this pyana module by itself, i.e. no GUI, processing 200 events and using an xtcexplorer-generated config file:

pyana -n 200 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_epics -m XtcExplorer.pyana_plotter <xtc files>

pyana_scan

This module is different from the others. In runs with several calibration cycles and one (or more) control PV (process variable), this module displays scalar values from other detectors as a function of scan step of the control PV. It currently takes two scalar type inputs to evaluate the scan:

input_epics         # Name(s) of other scalars to correlate in scan
input_scalars       # Name(s) of other scalars to correlate in scan

In addition, the control PV name is added to the parameter list. Currently it is only for display, as the module picks up the active control PV withouth using this parameter.

controlpv = None

Note! The XtcExplorer behaviour is different when you check off the ControlPV checkbox! In this case only the pyana_scan module is activated, and all other selected detectors are added as input to this module.

Example of how to run this pyana module by itself, i.e. no GUI, processing 200 events and using an xtcexplorer-generated config file:

pyana -n 200 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_scan -m XtcExplorer.pyana_plotter <xtc files>

Helper functions in utilities.py

'utilities.py' is a python module which currently contains several different classes, some related to pyana and others more general, but all developed to help process and plot data with the explorer. This module may soon be split up into several different ones.

Currently it holds the following classes and functions (just a list for now, will add more explanations):

  • To facilitate parsing and converting the options of pyana:
      class PyanaOptions( object )
        def __init__( self ):
        def getOptString(self, options_string) :
        def getOptStrings(self, options_string) :
        def getOptStringsDict(self, options_string) :
        def getOptIntegers(self, options_string):
        def getOptInteger(self, options_string):
        def getOptBoolean(self, options_string):
        def getOptBooleans(self, options_string):
        def getOptFloats(self, options_string):
        def getOptFloat(self, options_string):
      
  • Container class to store and plot event data
      class BaseData( object ):
       def __init__(self, name,type="BaseData"):
        def show( self ):
        def get_plottables_base(self):
        def get_plottables(self):
    
      class BldData( BaseData ):
        def __init__(self, name, type="BldData"):
    
      class IpimbData( BaseData ):
        def __init__( self, name, type="IpimbData" ):
    
      class EncoderData( BaseData ):
        def __init__( self, name, type="EncoderData" ):
    
      class WaveformData( BaseData ):
        def __init__( self, name, type="WaveformData" ):
        def get_plottables(self):
    
      class EpicsData( BaseData ):
        def __init__( self, name, type="EpicsData" ):
    
      class ScanData( BaseData ) :
        def __init__(self, name, type="ScanData"):
    
      class ImageData( BaseData ):
        def __init__(self, name, type="ImageData"):
        def get_plottables(self):
    
      class CsPadData( BaseData ):
        def __init__(self, name, type="CsPadData"):
      
  • Container class to keep track of thresholds. Can be passed between modules and from event to event.
      class Threshold( object ) :
      
  • Container classes to keep track of matplotlib frames and canvases. This can probably be done with
    matplotlib's own classes, but I couldn't find out to do it easily. For now, I use these ones:
      class Frame(object):
        def __init__(self, name="", title=""):
        def myticks(self, x, pos):
        def show(self):
        def update_axes(self):
        #def set_ticks_new(self, nticks, lotick, hitick, axis="X"):
        def set_ticks(self, limits = None ):
    
      class Plotter(object):
        def __init__(self):
        def add_frame(self, name="", title="",contents=None, type=None, aspect='auto'):
        def plot_all_frames(self, fignum=1, ordered=False):
        def settings(self
                     , width = 8 # width of a single plot
                     , height = 7 # height of a single plot
                     , nplots=1  # total number of plots in the figure
                     , maxcol=3  # maximum number of columns
                     ):
        def create_figure(self, fignum, nplots=1):
        def close_figure(self):
        def connect(self,plot=None):
        def onpick(self, event):
        def onclick(self, event) :
        def plot_image(self, image, fignum=1, title="", showProj = False, extent=None):
        def plot_several(self, list_of_arrays, fignum=1, title="" ):
        def draw_figurelist(self, fignum, event_display_images, title="",showProj=False,extent=None ) :
        def draw_figure( self, frameimage, title="", fignum=1,position=1, showProj = False,extent=None):
        def drawframe( self, frameimage, title="", fignum=1,position=1, showProj = False,extent=None):
      

Interactive plotting with IPython

Since XtcExplorer V00-01-04, you also have the option of launching ipython at the end of the job. The basic support for this has been added to all modules. Each pyana module stores some data (primarily as numpy arrays) which it passes to the pyana_plotter module which launches iPython. In the session you can investigate the data further and make additional plots.

  • Do 'whos' to see the workspace/namespace contents.
  • Exit the ipython session with Ctrl-D when you are done.
  • you can save the workspace using the ipython 'save'

Here are a few screenshot examples:

Full screenshot of all GUIs, plots and ipython session:

A couple of close-ups of the ipython terminal:

xtcscanner

This tool also belongs to the XtcExplorer package, and is used by the GUI. But the tool can also be run directly from the command line:

usage: xtcscanner [options] xtc-files ...

options:
  -h, --help            show this help message and exit
  -n NDATAGRAMS, --ndatagrams=NDATAGRAMS
  -v, --verbose
  -l L1_OFFSET, --l1-offset=L1_OFFSET

Example:

xtcscanner -n 200 /reg/d/psdm/AMO/amo01509/xtc/e8-r0094-s0*
Scanning....
Start parsing files:
['/reg/d/psdm/AMO/amo01509/xtc/e8-r0094-s00-c00.xtc', '/reg/d/psdm/AMO/amo01509/xtc/e8-r0094-s01-c00.xtc']
  201 datagrams read in 0.070000 s .   .   .   .   .   .   .
-------------------------------------------------------------
XtcScanner information:
  - 1 calibration cycles.
  - Events per calib cycle:
   [197]

Information from  0  control channels found:
Information from  9  devices found
                      BldInfo:EBeam:             EBeamBld (197)
            BldInfo:FEEGasDetEnergy:             FEEGasDetEnergy (197)
        DetInfo:AmoETof-0|Acqiris-0:  (5 ch)     AcqConfig_V1 (1)   AcqWaveform_V1 (197)
      DetInfo:AmoGasdet-0|Acqiris-0:  (2 ch)     AcqConfig_V1 (1)   AcqWaveform_V1 (197)
        DetInfo:AmoITof-0|Acqiris-0:  (1 ch)     AcqConfig_V1 (1)   AcqWaveform_V1 (197)
        DetInfo:AmoMbes-0|Acqiris-0:  (1 ch)     AcqConfig_V1 (1)   AcqWaveform_V1 (197)
     DetInfo:EpicsArch-0|NoDevice-0:             Epics_V1 (688)
         DetInfo:NoDetector-0|Evr-0:             EvrConfig_V2 (1)
                          ProcInfo::             RunControlConfig_V1 (11)
XtcScanner is done!
-------------------------------------------------------------

Further analysis with pyana

Any serious data analysis will need more customized tools than we can provide in this general GUI interface.

This will require the user / analyst to program his/her own tools. Pyana is a complete framework for programming a user analysis in python.
"Blank" analysis code can be generated with Andy's codegen script (try codegen -h and codegen -p for options). Extensive information about pyana is available on confluence.

Running this package's pyana modules outside of the XtcExplorer

Feel free to use any or all of the XtcExplorer modules as examples or starting point for your analysis. If you have suggestions for features or algorithms that might benefit others too, let me know and perhaps we can add it to the XtcExplorer package.

Example how to run a pyana module by itself, i.e. no GUI, processing 300 events and using an xtcexplorer-generated config file:

pyana -n 300 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_module -m XtcExplorer.pyana_ploter <xtc files>

Or if you add "plt.ion()" to the constructor for SlideShow mode OR "plt.show()" to make_plot functions for interactive plots, you can also do without the pyana_plotter module:

pyana -n 300 -c xb_pyana_5299.cfg -m XtcExplorer.pyana_module <xtc files>

Submitting to batch

Once you've identified the command line to run your pyana job, you can submit this to the LFS batch queue system as described in Computing.

Be aware that the pyana scripts used by the explorer use matplotlib QtAgg backend to display plots, and this will fail if you submit it to batch processing. While I look for a better solution, you can do the following to work around this problem:

  • Configure pyana to plot as little as possible by setting the display mode to NoDisplay
  • Add the following two lines to XtcExplorer/src/utilities.py :

    import matplotlib
    matplotlib.use('PDF')

A few words on time and performance

The explorer hasn't been optimized for speed properly, but I strive to keep the pyana examples relatively efficient. But keep in mind
that plotting with matplotlib does take a substansial amount of time. An example:

Running the explorer on a small xtc file from a XCS commissioning run, containing 1267 events, and plotting information
from two IPIMB detectors and a YAG camera image.

  • Processing all 1267 events and plotting only at the end took 7.26 s
  • Processing all 1267 events, plotting (SlideShow mode) at every 100 events took 25.6 s
  • Processing all 1267 events, plotting (SlideShow mode) at every 10 events took 197.0 s

So matplotlib drawing these plots take about 1.5 s each time, quite substantial compared to 5.7 microseconds for pyana to process each event. Other types of plots may take longer to plot, e.g. larger images, waveforms, etc.

  • No labels