Requirements
Please make sure to follow the instructions for compiling python prior to building ROOT since ROOT needs to be built against python. ROOT may also be built against MySQL on the linuxes. Also note that often the version of the source we utilize for ROOT is Fermi-specific where patches have been applied or the version of ROOT is from a branch from their Subversion repository.
v5.34.34
cmake -Dalien:BOOL=off -Dasimage:BOOL=OFF -Dbonjour:BOOL=OFF -Dbuiltin_pcre:BOOL=ON -Dbuiltin_xrootd:BOOL=ON -Dcxx11:BOOL=OFF -Dcastor:BOOL=OFF -Ddcache:BOOL=OFF -Dfail-on-missing:BOOL=OFF -Dgdml:BOOL=ON -Dgfal:BOOL=OFF -Dglite:BOOL=OFF -Dgsl_shared:BOOL=ON -Dgviz:BOOL=OFF -Dhdfs:BOOL=OFF -Dminuit2:BOOL=ON -Dmonalisa:BOOL=OFF =Dopengl:BOOL=OFF -Dpgsql:BOOL=OFF -Dpythia6:BOOL=OFF -Dpythia8:BOOL=OFF -Drootfit:BOOL=ON -Drfio:BOOL=ON -Dsapdb:BOOL=OFF -Dsrp:BOOL=OFF -Dssl:BOOL=OFF -Dtable:BOOL=ON -Dtesting:BOOL=ON -Dunuran:BOOL=ON -Dx11:BOOL=ON -DORACLE_DIR=/usr/oracle -DORACLE_PATH_INCLUDES=/usr/oracle/rdbms/public -DORACLE_PATH_LIB=/usr/oracle/lib -DORACLE_OCI_VERSION=11 -DPYTHON_EXECUTABLE=$GLAST_EXT/python/2.7.10/bin/python -DPYTHON_INCLUDE_DIR=$GLAST_EXT/python/2.7.10/include -DPYTHON_LIBRARY=$GLAST_EXT/python/2.7.10/lib/libpython2.7.so -DMYSQL_DIR=$GLAST_EXT/mysql/5.1.39-gl2 -DMYSQL_CONFIG_EXECUTABLE=$GLAST_EXT/mysql/5.1.39-gl2/bin/mysql_config -DCFITSIO_INCLUDE_DIR=$GLAST_EXT/cfitsio/v3370/include -DCFITSIO_LIBRARY=$GLAST_EXT/cfitsio/v3370/lib/libcfitsio.so $GLAST_EXT/ROOT/v5.34.34-build/root
v5.34.03
snowleopard
- Unpack ROOT source
- update cmake scripts to replace m64 with m32, as the cmake initialiation seems to find 64 bit on bldmac02, but we want 32bit builds
- Setup environment
- setenv PATH
- setenv PYTHONHOME
- setenv PYTHONPATH
- mkdir install
- mkdir build
- cd build
- cmake
- make >& build.log &
- make install
Windows-i386-32bit-vc90
Trying cmake builds
- Obtain source and gunzip and untar
- Open Command Prompt
- C:\"Program Files\Microsoft Visual Studio 9.0"\Common7\Tools\vsvars32.bat
- Make sure only one copy of Python is in your path
- set LIB
- set PATH
- set INCLUDE
- create a cmakeBuild subdirectory separate from the source
- cmake -DCMAKE_INSTALL_PREFIX=C:\buildRoot\install -DCMAKE_BUILD_TYPE=Debug -G "Visual Studio 9 2008"
- Edit the resulting CmakeCache.txt file to reflect the appropriate settings for our build - turning off odbc, turning on table, unran, minut2. Note roofit consistently fails on Windows due to a line too large error
- Rerun cmake
- Open the resulting ROOT.sln
- Build ALL_BUILD
- May need to perform INSTALL step separately (it is located under "CMakePredefinedTargets"
redhat5-i686-32bit-gcc41
- Requires our MySQL installation, as well as Oracle
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
- Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
- obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.34.01-src.tar.gz and unpack, it will be dumped into a directory named "root"
- Obtain xrootd source from the site:
- Following instructions at ROOT website: http://root.cern.ch/drupal/content/installing-xrootd
build/unix/installXrootd.sh <installationDir> -v 3.2.4 -t <xroottarball> - export EXTRA_LDFLAGS=-pthread
- add python bin dir to PATH
- Run ./configure
./configure linux --fail-on-missing --enable-builtin-pcre --enable-krb5 --enable-mysql --with-mysql-incdir=$GLAST_EXT/mysql/5.1.39-gl1/include/mysql --with-mysql-libdir=$GLAST_EXT/mysql/5.1.39-gl1/lib/mysql --enable-xrootd --with-xrootd=$GLAST_EXT/xrootd/3.2.4/xrootd-3.2.4 --enable-python --with-python-incdir=$GLAST_EXT/python/2.7.2/include/python2.7 --with-python-libdir=$GLAST_EXT/python/2.7.2/lib --enable-reflex --enable-cintex --enable-roofit --enable-oracle --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$GLAST_EXT/gsl/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/gsl/gsl-1.10/lib > & config-rhel5.log & - make
- May have to manually get by the libpyROOT.so link by copying the failed line and adding -pthread -lutil -Xlinker -explicit-dynamic
Then restart make and carry on to the end
v5.34.01
redhat5-i686-32bit-gcc41
- Requires our MySQL installation, as well as Oracle
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
- Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
- obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.34.01-src.tar.gz and unpack, it will be dumped into a directory named "root"
- Obtain xrootd source from the site:
- Following instructions at ROOT website: http://root.cern.ch/drupal/content/installing-xrootd
build/unix/installXrootd.sh <installationDir> -v 3.2.4 -t <xroottarball> - Run ./configure
./configure linux --fail-on-missing --enable-builtin-pcre --enable-krb5 --enable-mysql --with-mysql-incdir=$GLAST_EXT/mysql/5.1.39-gl1/include/mysql --with-mysql-libdir=$GLAST_EXT/mysql/5.1.39-gl1/lib/mysql --enable-xrootd --with-xrootd=$GLAST_EXT/xrootd/3.2.4/xrootd-3.2.4 --enable-python --with-python-incdir=$GLAST_EXT/python/2.7.1-gl1/include/python2.7 --with-python-libdir=$GLAST_EXT/python/2.7.1-gl1/lib --enable-reflex --enable-cintex --enable-roofit --enable-oracle --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$GLAST_EXT/gsl/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/gsl/gsl-1.10/lib > & config-rhel5.log & - make
redhat5-x86_64-64bit-gcc41
- Requires our MySQL installation, as well as Oracle
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
- Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
- obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.34.01-src.tar.gz and unpack, it will be dumped into a directory named "root"
- Obtain xrootd source from the site:
- Following instructions at ROOT website: http://root.cern.ch/drupal/content/installing-xrootd
build/unix/installXrootd.sh <installationDir> -v 3.2.4 -t <xroottarball> - Run ./configure (Note dropped Oracle support due to lack of true 64 bit oracle libs on rhel5-64 at SLAC, should be fine as oracle is only used for GR systems tests, and there no plans to port GR to rhel5-64)
./configure linuxx8664gcc --fail-on-missing --enable-builtin-pcre --enable-krb5 --enable-mysql --with-mysql-incdir=$GLAST_EXT/mysql/5.1.39-gl1/include/mysql --with-mysql-libdir=$GLAST_EXT/mysql/5.1.39-gl1/lib/mysql --enable-xrootd --with-xrootd=$GLAST_EXT/xrootd/xrootd-3.2.4 --enable-python --with-python-incdir=$GLAST_EXT/python/2.7.2/include/python2.7 --with-python-libdir=$GLAST_EXT/python/2.7.2/lib --enable-reflex --enable-cintex --enable-roofit --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathmore --with-fftw3-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$GLAST_EXT/gsl/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/gsl/gsl-1.10/lib >& config-rhel5-64-2.log &
redhat6-x86_64-64bit-gcc44
Similar to redhat5, using this configure step:
./configure linuxx8664gcc --fail-on-missing --enable-builtin-pcre --enable-krb5 --enable-mysql --with-mysql-incdir=$GLAST_EXT/mysql/5.1.39-gl2/include/mysql --with-mysql-libdir=$GLAST_EXT/mysql/5.1.39-gl2/lib/mysql --enable-xrootd --with-xrootd=$GLAST_EXT/xrootd/xrootd-3.2.4 --enable-python --with-python-incdir=$GLAST_EXT/python/2.7.2-gl4/include/python2.7 --with-python-libdir=$GLAST_EXT/python/2.7.2-gl4/lib --enable-reflex --enable-cintex --enable-roofit --enable-oracle --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathmore --with-fftw3-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc44/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc44/lib --with-gsl-incdir=$GLAST_EXT/gsl/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/gsl/gsl-1.10/lib >& config-rhel6.log &
Windows-i386-32bit-vc90
Note: No xrootd, as windows support has been dropped
Initial attempts to use the new cmake build failed, retreated to using the cygwin build system
- Obtain the source from $GLAST_EXT/../srcExtLibs/root_v5.34.01.src.tar.gz
- Unpack which will create a directory called root
- Start up DOS Command prompt
- set PATH=
- set LIB=
- set INCLUDE=
- execute "C:\Program Files\Microsoft Visual Studio 9.0\Common7\Tools\vsvars32.bat"
- run setupvc9.bat:
set ROOTSYS=C:\heather\buildRoot\root
set PYTHONDIR=C:\Python27
set PYTHONPATH=%ROOTSYS%\bin
set ROOTBUILD=debug
set LIB=C:\Program Files\Microsoft SDKs\Windows\v6.0A\Lib;%LIB%;%ROOTSYS%\lib
set PATH=C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Python25;%ROOTSYS%\bin;C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin;%PATH%;%ROOTSYS%\lib
set INCLUDE=C:\Program Files\Microsoft SDKs\Windows\v6.0A\Include;include;%INCLUDE% - Start up cygwin: bash --login -i
- cd $ROOTSYS
- ./configure win32 --enable-roofit --enable-minuit2 --enable-table --enable-python --disable-odbc --enable-gdml --enable-reflex --enable-cintex --with-fftw3-incdir=C:/heather/buildroot/fftw3/3.1.2/win32_vc90/include --with-fftw3-libdir=C:/heather/buildroot/fftw3/3.1.2/win32_vc90/lib --with-gccxml=C:/heather/buildroot/GCC_XML/bin --with-python-libdir=C:/Python27/libs --with-python-incdir=C:/Python27/include --enable-mathmore --with-gsl-incdir=C:/heather/buildroot/GSL/1.10/win32_vc90/include --with-gsl-libdir=C:/heather/buildrooot/GSL/1.10/win32_vc90/lib --enable-winrtdebug
- Note the use of --enable-winrtdebug to set up a DEBUG build, leave off for OPT
- make
- set PATH=%ROOTSYS%\bin;%PATH and start up root
v5.26.00a-gl6
redhat6-x86_64-64bit-gcc44
- Build on rhel6-64
- Requires our MySQL installation, as well as Oracle
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl6-src.tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure: ./configure --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39/gcc4.4/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39/gcc4.4/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.2/gcc44/include/python2.7 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.2/gcc44/lib/python2.7/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc44/include --with-fftw3-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc44/lib --with-gsl-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gsl/gsl-1.10/include --with-gsl-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gsl/gsl-1.10/lib >&config-rhel6.log
- Build by running "make >& build-rhel6.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/5.26.00a-gl6/gcc44/
README bin build-rhel6.log cint config-rhel6.log doc etc fonts icons include lib macros man test tutorials
v5.26.00a-gl3
Rebuild of pyRoot using v5.26.00a-gl2 source, but built against python 2.6.5
snowleopard-i386-32bit-gcc42
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl3.tar.gz and unpack, it will be dumped into a directory named "root"
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - setup your environment, where we have cd'd into the root directory created when the source was unpacked:
setenv GLAST_EXT /afs/slac/g/glast/ground/GLAST_EXT/snowleopard-i386-32bit-gcc42/
setenv ROOTSYS $PWD
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${ROOTSYS}/lib/root
setenv PATH ${GLAST_EXT}/python/2.6.5/gcc40/bin:/bin:/sbin:/usr/b
in:/usr/sbin:@sys/usr/bin:${ROOTSYS}/bin
setenv PYTHONHOME ${GLAST_EXT}/python/2.6.5/gcc40/lib/python2.6
setenv PYTHONPATH ${PYTHONHOME}:${ROOTSYS}/bin:${ROOTSYS}/lib:$Unknown macro: {GLAST_EXT}/python/2.6.5/gcc42/lib/python2.6/lib-dynload//python/2.6.5/gcc42/lib/python2.6/lib-dynload/$
setenv DYLD_LIBRARY_PATH ${ROOTSYS}/lib - Run configure:
./configure --disable-mysql --enable-python --with-python-incdir=$GLAST_EXT/python/2.6.5/gcc40/include/python2.6 --with-python-libdir=$GLAST_EXT/python/2.6.5/gcc42/lib/python2.6/config --enable-roofit --disable-odbc --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/ROOT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-gsl-incdir=$GLAST_EXT/ROOT/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/ROOT/gsl-1.10/lib --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc42/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc42/lib > & config-snowleopard.log &
- Build by running "make >& build-snowleopard.log &"
- libPyROOT.dylib must be rebuilt, due to a need to make it a "bundle" rather than "shared library":
cd into pyroot/src directory and do:
g++ -flat_namespace -bundle *.o -bundle_loader $GLAST_EXT/python/2.6.5/gcc42/bin/python -L$ROOTSYS/lib -ldl -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lMatrix -lMathCore -lThread -lReflex -L$GLAST_EXT/python/2.6.5/gcc42/lib/python2.6/config -lpython2.6 -o libPyROOT.so
See: https://savannah.cern.ch/bugs/index.php?22003 - The *.dylib files will have their references to other ROOT libraries hard-coded. This must be fixed before the libraries can be distributed. Both the ids and the ROOT libraries referenced must be updated.
- First check the id and references using:
otool -L name.dylib. i.e. otool -L libCint.dylib - Next update the id using the command:
install_name_tool -id newID fileName i.e. install_name_tool -id libCint.dylib libCint.dylib - For any ROOT libraries referenced do:
install_name_tool -change oldName newName fileName i.e install_name_tool -change $ROOTSYS/lib/libNet.dylib libNet.dylib libPyROOT.dylib
- First check the id and references using:
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl2/gcc42/
README bin build-tiger.log cint config-tiger.log doc etc fonts icons include lib macros man test tutorials
v5.26.00a-gl2
Patch to TMVA's Reader.cxx included in v5.26.00b
redhat6-x86_64-64bit-gcc44
- Build on rhel6-64
- Requires our MySQL installation, as well as Oracle
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure: ./configure --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39/gcc4.4/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39/gcc4.4/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.2/gcc4.4/include/python2.7 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.2/gcc4.4/lib/python2.7/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc4.4/include --with-fftw3-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc4.4/lib --with-gsl-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gsl/gsl-1.10/include --with-gsl-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gsl/gsl-1.10/lib >&config-rhel6.log
- If ./include/TGGC.h file doesn't exists or is an empty file then "cp ./gui/gui/inc/TGGC.h to ./include"
- Build by running "make >& build-rhel6.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/5.26.00a-gl2/gcc44/
README bin build-rhel6.log cint config-rhel6.log doc etc fonts icons include lib macros man test tutorials
tiger-i386-32bit-gcc40
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
- setup your environment, where we have cd'd into the root directory created when the source was unpacked:
setenv GLAST_EXT /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/
setenv ROOTSYS $PWD
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${ROOTSYS}/lib/root
setenv PATH ${GLAST_EXT}/python/2.5.1-gl3/gcc40/bin:/bin:/sbin:/usr/b
in:/usr/sbin:@sys/usr/bin:${ROOTSYS}/bin
setenv PYTHONHOME ${GLAST_EXT}/python/2.5.1-gl3/gcc40/lib/python2.5
setenv PYTHONPATH ${PYTHONHOME}:${ROOTSYS}/bin:${ROOTSYS}/lib
setenv DYLD_LIBRARY_PATH ${ROOTSYS}/lib - Run configure:
./configure --disable-mysql --enable-python --with-python-incdir=/afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/include/python2.5 --with-python-libdir=/afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/lib/python2.5/config --enable-roofit --disable-odbc --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/ROOT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-gsl-incdir=$GLAST_EXT/ROOT/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/ROOT/gsl-1.10/lib --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc40/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc40/lib > & config-tiger.log &
- Build by running "make >& build-tiger.log &"
- libPyROOT.dylib must be rebuilt, due to a need to make it a "bundle" rather than "shared library":
cd into pyroot/src directory and do:
g++ -flat_namespace -bundle *.o -bundle_loader $GLAST_EXT/python/2.5.1-g3/gcc40/bin/python -L$ROOTSYS/lib -ldl -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lMatrix -lMathCore -lThread -lReflex -L$GLAST_EXT/python/2.5.1-gl3/gcc40/lib/python2.5/config -lpython2.5 -o libPyROOT.dylib
See: https://savannah.cern.ch/bugs/index.php?22003 - The *.dylib files will have their references to other ROOT libraries hard-coded. This must be fixed before the libraries can be distributed. Both the ids and the ROOT libraries referenced must be updated.
- First check the id and references using:
otool -L name.dylib. i.e. otool -L libCint.dylib - Next update the id using the command:
install_name_tool -id newID fileName i.e. install_name_tool -id libCint.dylib libCint.dylib - For any ROOT libraries referenced do:
install_name_tool -change oldName newName fileName i.e install_name_tool -change $ROOTSYS/lib/libNet.dylib libNet.dylib libPyROOT.dylib
- First check the id and references using:
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl2/gcc40/
README bin build-tiger.log cint config-tiger.log doc etc fonts icons include lib macros man test tutorials
snowleopard-i386-32bit-gcc42
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl2.tar.gz and unpack, it will be dumped into a directory named "root"
- setup your environment, where we have cd'd into the root directory created when the source was unpacked:
setenv GLAST_EXT /afs/slac/g/glast/ground/GLAST_EXT/snowleopard-i386-32bit-gcc42/
setenv ROOTSYS $PWD
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${ROOTSYS}/lib/root
setenv PATH ${GLAST_EXT}/python/2.6.5/gcc40/bin:/bin:/sbin:/usr/b
in:/usr/sbin:@sys/usr/bin:${ROOTSYS}/bin
setenv PYTHONHOME ${GLAST_EXT}/python/2.6.5/gcc40/lib/python2.6
setenv PYTHONPATH ${PYTHONHOME}:${ROOTSYS}/bin:${ROOTSYS}/lib
setenv DYLD_LIBRARY_PATH ${ROOTSYS}/lib - Run configure:
./configure --disable-mysql --enable-python --with-python-incdir=$GLAST_EXT/python/2.6.5/gcc40/include/python2.6 --with-python-libdir=$GLAST_EXT/python/2.6.5/gcc40/lib/python2.6/config --enable-roofit --disable-odbc --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/ROOT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-gsl-incdir=$GLAST_EXT/ROOT/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/ROOT/gsl-1.10/lib --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc40/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc40/lib > & config-snowleopard.log &
- Build by running "make >& build-snowleopard.log &"
- libPyROOT.dylib must be rebuilt, due to a need to make it a "bundle" rather than "shared library":
cd into pyroot/src directory and do:
g++ -flat_namespace -bundle *.o -bundle_loader $GLAST_EXT/python/2.5.1-g3/gcc40/bin/python -L$ROOTSYS/lib -ldl -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lMatrix -lMathCore -lThread -lReflex -L$GLAST_EXT/python/2.5.1-gl3/gcc40/lib/python2.5/config -lpython2.5 -o libPyROOT.dylib
See: https://savannah.cern.ch/bugs/index.php?22003 - The *.dylib files will have their references to other ROOT libraries hard-coded. This must be fixed before the libraries can be distributed. Both the ids and the ROOT libraries referenced must be updated.
- First check the id and references using:
otool -L name.dylib. i.e. otool -L libCint.dylib - Next update the id using the command:
install_name_tool -id newID fileName i.e. install_name_tool -id libCint.dylib libCint.dylib - For any ROOT libraries referenced do:
install_name_tool -change oldName newName fileName i.e install_name_tool -change $ROOTSYS/lib/libNet.dylib libNet.dylib libPyROOT.dylib
- First check the id and references using:
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl2/gcc42/
README bin build-tiger.log cint config-tiger.log doc etc fonts icons include lib macros man test tutorials
v5.26.00a-gl1
Includes patch to TMVA Config.h and Config.cxx for windows
redhat5-x86_64-64bit-gcc41
- Build on rhel5-64
- Requires our MySQL installation, as well as Oracle
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure:
./configure --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/mysql/5.1.39/gcc41/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/mysql/5.1.39/gcc41/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/python/2.5.1-gl1/gcc41/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/python/2.5.1-gl1/gcc41/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$workDir/gaudi-external-v21r7-rhel5/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/../redhat5-x86_64-64bit-gcc41/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/../redhat5-x86_64-64bit-gcc41/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$workDir/gaudi-external-v21r7-rhel5/gsl-1.10/include --with-gsl-libdir=$workDir/gaudi-external-v21r7-rhel5/gsl-1.10/lib >&config-redhat5.log - Build by running "make >& build-rhel5.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl1/gcc41/
README bin build-rhel5.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials
redhat5-i686-32bit-gcc41
- Build on rhel5-32 or bldlnx09
- Requires our MySQL installation, as well as Oracle
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/mysql/5.1.39/gcc41/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/mysql/5.1.39/gcc41/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/python/2.5.1-gl1/gcc41/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/python/2.5.1-gl1/gcc41/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$workDir/gaudi-external-v21r7-rhel5/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/../redhat5-i686-32bit-gcc41/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/../redhat5-i686-32bit-gcc41/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$workDir/gaudi-external-v21r7-rhel5/gsl-1.10/include --with-gsl-libdir=$workDir/gaudi-external-v21r7-rhel5/gsl-1.10/lib >&config-redhat5.log - Build by running "make >& build-rhel5.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl1/gcc41/
README bin build-rhel5.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials
redhat4-x86_64-64bit-gcc34
- Build on rhel4-64
- Requires our MySQL installation, as well as Oracle
- Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl/ http://www.gnu.org/software/gsl/; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install - Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- run ./configure (note that "linux" is left unspecified)
./configure --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/mysql/5.1.39/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/mysql/5.1.39/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$workDir/gaudi-external-v21r7-rhel4-64/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/../redhat4-x86_64-64bit-gcc34/fftw/3.1.2/gcc34/include/fftw --with-fftw3-libdir=$GLAST_EXT/../redhat4-x86_64-64bit-gcc34/fftw/3.1.2/gcc34/lib --with-gsl-incdir=$workDir/gaudi-external-v21r7-rhel4-64/gsl-1.10/include --with-gsl-libdir=$workDir/gaudi-external-v21r7-rhel4-64/gsl-1.10/lib > & config-redhat4.log & - Build by running "make >& build-rhel4.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl1/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials
redhat4-i686-32bit-gcc34
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/5.1.39/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/5.1.39/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$userSpace/root-v5.26-gl1/gccxml/0.9.0_20090601/slc4_ia32_gcc34/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=$userSpace/root-v5.26-gl1/fftw3/3.1.2/slc4_ia32_gcc34/include --with-fftw3-libdir=$userSpace/root-v5.26-gl1/fftw3/3.1.2/slc4_ia32_gcc34/lib --with-gsl-incdir=$userSpace/root-v5.26-gl1/GSL/1.10/slc4_ia32_gcc34/include --with-gsl-libdir=$userSpace/root-v5.26-gl1/GSL/1.10/slc4_ia32_gcc34/lib > & config-rhel4.log & - Build by running "make >& build-rhel4.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl1/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials
Windows
If cygwin is not already installed, installcygwin including gcc, make, etc NOTE: cygwin's link.exe application must be renamed, so that VC's link will be used for the build.
http://root.cern.ch/twiki/bin/view/ROOT/PatchesV5-14-00
Python 2.5.1 for windows, FFTW 3.1.2 from http://www.fftw.org/install/windows.html, obtained gccxml from Gaudi v21r7 distribution
downloaded gccxml from http://www.gccxml.org/HTML/Index.html
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
- In a DOS window
set PATH=
set LIB=
set INCLUDE=
"C:\Program Files\Microsoft Visual Studio .NET 2003\Common7\Tools\vsvars32.bat"
set ROOTSYS=C:\heather\root-v5.20-gl1\root
set PYTHONDIR=C:\heather\glast\extlib\python\2.5.1-gl1\vc71
set PYTHONPATH=%ROOTSYS%\bin
set ROOTBUILD=opt
set LIB=C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2\Lib;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\Lib;%LIB%;%ROOTSYS%\lib
set PATH=C:\heather\glast\extlib\python\2.5.1-gl1\vc71;%ROOTSYS%\bin;C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2\Bin;C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2\Lib;%PATH%;%ROOTSYS%\lib
set INCLUDE=C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2\Include;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\include;%INCLUDE% - Start up cygwin: bash --login -i
- Run ./confgure:
./configure win32 --enable-roofit --enable-minuit2 --enable-table --enable-python --enable-gdml --enable-unuran --disable-odbc --enable-mathmore --enable-genvector --enable-tmva --enable-reflex --enable-cintex --enable-xrootd --with-fftw3-incdir=C:/heather/root-v5.20-gl1/fftw3/3.1.2/win32_vc71/include --with-fftw3-libdir=C:/heather/root-v5.20-gl1/fftw3/3.1.2/win32_vc71/lib --with-gccxml=C:/heather/root-v5.20-gl1/GCC_XML/0.9.0_20090601/win32_vc71/bin --with-python-libdir=C:/heather/glast/extlib/python/2.5.1-gl1/vc71/libs --with-python-incdir=C:/heather/glast/extlib/python/2.5.1-gl1/vc71/include - make
v5.22.00e-gl1
Includes updated xrootd from Wilko (same as in v5.20.00-gl5)
redhat4-i686-32bit-gcc34
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.22.00e-gl1.tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/5.1.39/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/5.1.39/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$userSpace/gaudi_v21r4/gccxml/0.9.0_20090601/slc4_ia32_gcc34/bin --enable-gdml > & config-rhel4.log & - Build by running "make >& build-rhel4.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.22.00e-gl1/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials
v5.20.00-gl5
We ran into a problem this time with distribution of our linux build for ROOT. It seems prefix cannot be used, so we must set the ROOTSYS env var for our build. make install no longer seems to work unless prefix is used, so we are left to prune the resulting ROOT build directories on our own.
redhat4-x86_64-64bit-gcc34
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure:
./configure linuxx8664gcc --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/mysql/4.1.18/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/mysql/4.1.18/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink > & config-rhel4.log & - Build by running "make >& build-rhel4.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.20.00-gl4/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials
redhat3-i686-32bit-gcc32
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit-gcc32/mysql/4.1.18/gcc32/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit-gcc32/mysql/4.1.18/gcc32/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit-gcc32/python/2.5.1-gl1/gcc32/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit-gcc32/python/2.5.1-gl1/gcc32/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink > & config-rhel3.log & - Build by running "make >& build-rhel3.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.20.00-gl4/gcc32/
README bin build-rhel3.log cint config-rhel3.log doc etc fonts icons include lib macros man test tutorials
redhat4-i686-32bit-gcc34
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
- set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
- Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/4.1.18/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/4.1.18/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink > & config-rhel4.log & - Build by running "make >& build-rhel4.log &"
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.20.00-gl4/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials
tiger-i386-32bit-gcc40
- Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
- setup your environment, where we have cd'd into the root directory created when the source was unpacked:
setenv GLAST_EXT /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/
setenv ROOTSYS $PWD
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${ROOTSYS}/lib/root
setenv PATH ${GLAST_EXT}/python/2.5.1-gl3/gcc40/bin:/bin:/sbin:/usr/b
in:/usr/sbin:@sys/usr/bin:${ROOTSYS}/bin
setenv PYTHONHOME ${GLAST_EXT}/python/2.5.1-gl3/gcc40/lib/python2.5
setenv PYTHONPATH ${PYTHONHOME}:${ROOTSYS}/bin:${ROOTSYS}/lib
setenv DYLD_LIBRARY_PATH ${ROOTSYS}/lib - Run configure:
./configure --disable-mysql --enable-python --with-python-incdir=/afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl3/gcc40/include/python2.5 --with-python-libdir=/afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl3/gcc40/lib/python2.5/config --enable-roofit --disable-odbc --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink >& config-tiger.log & - Build by running "make >& build-tiger.log &"
- libPyROOT.dylib must be rebuilt, due to a need to make it a "bundle" rather than "shared library":
cd into pyroot/src directory and do:
g++ -flat_namespace -bundle *.o -bundle_loader $GLAST_EXT/python/2.5.1-g3/gcc40/bin/python -L$ROOTSYS/lib -ldl -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lMatrix -lMathCore -lThread -lReflex -L$GLAST_EXT/python/2.5.1-gl3/gcc40/lib/python2.5/config -lpython2.5 -o libPyROOT.dylib
See: https://savannah.cern.ch/bugs/index.php?22003 - The *.dylib files will have their references to other ROOT libraries hard-coded. This must be fixed before the libraries can be distributed. Both the ids and the ROOT libraries referenced must be updated.
- First check the id and references using:
otool -L name.dylib. i.e. otool -L libCint.dylib - Next update the id using the command:
install_name_tool -id newID fileName i.e. install_name_tool -id libCint.dylib libCint.dylib - For any ROOT libraries referenced do:
install_name_tool -change oldName newName fileName i.e install_name_tool -change $ROOTSYS/lib/libNet.dylib libNet.dylib libPyROOT.dylib
- First check the id and references using:
- Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1 - Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.20.00-gl4/gcc40/
README bin build-tiger.log cint config-tiger.log doc etc fonts icons include lib macros man test tutorials