Requirements

Please make sure to follow the instructions for compiling python prior to building ROOT since ROOT needs to be built against python. ROOT may also be built against MySQL on the linuxes. Also note that often the version of the source we utilize for ROOT is Fermi-specific where patches have been applied or the version of ROOT is from a branch from their Subversion repository.

v5.34.34

redhat7-x86_64-64bit-gcc48

Turning off mysql and oracle support since GR is not expected to come over the RH7 and oracle seems unavailable and the initial attempt to configure mysql 5.1.39 failed. Also dropped GSL (GSL_DIR and gsl_shared removed) due to build failure, cmake couldn't find our gsl even though it was indicated.

bash-4.2$ cmake -Dalien:BOOL=off -Dbonjour:BOOL=OFF -Dbuiltin_freetype=ON -Dbuiltin_pcre:BOOL=ON -Dbuiltin_xrootd:BOOL=ON -Dcxx11:BOOL=OFF -Dcastor:BOOL=OFF -Ddcache:BOOL=OFF -Dfail-on-missing:BOOL=OFF -Dgdml:BOOL=ON -Dgfal:BOOL=OFF -Dglite:BOOL=OFF -Dgsl_shared:BOOL=ON -Dgviz:BOOL=OFF -Dhdfs:BOOL=OFF -Dminuit2:BOOL=ON -Dmonalisa:BOOL=OFF =Dopengl:BOOL=OFF -Dpgsql:BOOL=OFF -Dpythia6:BOOL=OFF -Dpythia8:BOOL=OFF -Drootfit:BOOL=ON -Drfio:BOOL=ON -Dsapdb:BOOL=OFF -Dsrp:BOOL=OFF -Dssl:BOOL=OFF -Dtable:BOOL=ON -Dtesting:BOOL=ON -Dunuran:BOOL=ON -Dx11:BOOL=ON -DPYTHON_EXECUTABLE=$GLAST_EXT/python/2.7.10/bin/python -DPYTHON_INCLUDE_DIR=$GLAST_EXT/python/2.7.10/include/python2.7 -DPYTHON_LIBRARY=$GLAST_EXT/python/2.7.10/lib/libpython2.7.so -DCFITSIO_INCLUDE_DIR=$GLAST_EXT/cfitsio/v3370/include -DCFITSIO_LIBRARY=$GLAST_EXT/cfitsio/v3370/lib/libcfitsio.so -DFFTW_INCLUDE_DIR=$GLAST_EXT/fftw/3.1.2-gl1/include -DFFTW_LIBRARY=$GLAST_EXT/fftw/3.1.2-gl1/lib/libfftw3.so -DGSL_DIR=$GLAST_EXT/gsl/1.16 -DCMAKE_INSTALL_PREFIX=$GLAST_EXT/ROOT/v5.34.34 $GLAST_EXT/ROOT/root_v5.34.34-src
– The C compiler identification is GNU 4.8.5
– The CXX compiler identification is GNU 4.8.5
– Check for working C compiler: /usr/bin/cc
– Check for working C compiler: /usr/bin/cc – works
– Detecting C compiler ABI info
– Detecting C compiler ABI info - done
– Check for working CXX compiler: /usr/bin/c++
– Check for working CXX compiler: /usr/bin/c++ – works
– Detecting CXX compiler ABI info
– Detecting CXX compiler ABI info - done
– The Fortran compiler identification is GNU
– Check for working Fortran compiler: /usr/bin/gfortran
– Check for working Fortran compiler: /usr/bin/gfortran – works
– Detecting Fortran compiler ABI info
– Detecting Fortran compiler ABI info - done
– Checking whether /usr/bin/gfortran supports Fortran 90
– Checking whether /usr/bin/gfortran supports Fortran 90 – yes
– Found GCC. Major version 4, minor version 8
– CMAKE_BUILD_TYPE: RelWithDebInfo
– Performing Test CXX_HAS_Wno-array-bounds
– Performing Test CXX_HAS_Wno-array-bounds - Success
– Performing Test CXX_HAS_Wno-strict-aliasing
– Performing Test CXX_HAS_Wno-strict-aliasing - Success
– Looking for include file pthread.h
– Looking for include file pthread.h - found
– Looking for pthread_create
– Looking for pthread_create - not found
– Looking for pthread_create in pthreads
– Looking for pthread_create in pthreads - not found
– Looking for pthread_create in pthread
– Looking for pthread_create in pthread - found
– Found Threads: TRUE
– Found a 64bit system
– Found GNU compiler collection
– Performing Test CXX_HAS_Wno_deprecated_declarations
– Performing Test CXX_HAS_Wno_deprecated_declarations - Success
– ROOT Platform: linux
– ROOT Architecture: linuxx8664gcc
– Build Type: RelWithDebInfo
– Compiler Flags: -pipe -m64 -Wall -W -Woverloaded-virtual -fPIC -pthread -Wno-deprecated-declarations
– Looking for ZLib
– Found ZLIB: /usr/lib64/libz.so (found version "1.2.7")
– Looking for LZMA
– LZMA not found. Switching on builtin_lzma option
– Building LZMA version 5.0.3 included in ROOT itself
– Looking for X11
– Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so
– Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so - found
– Looking for gethostbyname
– Looking for gethostbyname - found
– Looking for connect
– Looking for connect - found
– Looking for remove
– Looking for remove - found
– Looking for shmat
– Looking for shmat - found
– Found X11: /usr/lib64/libX11.so
– X11_INCLUDE_DIR: /usr/include
– X11_LIBRARIES: /usr/lib64/libX11.so;/usr/lib64/libXext.so
– X11_Xpm_INCLUDE_PATH: /usr/include
– X11_Xpm_LIB: /usr/lib64/libXpm.so
– X11_Xft_INCLUDE_PATH: /usr/include
– X11_Xft_LIB: /usr/lib64/libXft.so
– X11_Xext_INCLUDE_PATH:
– X11_Xext_LIB: /usr/lib64/libXext.so
– Could NOT find GIF (missing: GIF_LIBRARY GIF_INCLUDE_DIR)
– Could NOT find TIFF (missing: TIFF_LIBRARY TIFF_INCLUDE_DIR)
– Could NOT find PNG (missing: PNG_LIBRARY PNG_PNG_INCLUDE_DIR)
– Could NOT find JPEG (missing: JPEG_LIBRARY JPEG_INCLUDE_DIR)
– Looking for GSL
– Found GSL: /afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/redhat7-x86_64-64bit-gcc48/gsl/1.16/include (found suitable version "1.16", minimum required is "1.10")
– Looking for Python
– Found PythonInterp: /afs/slac/g/glast/ground/GLAST_EXT/redhat7-x86_64-64bit-gcc48/python/2.7.10/bin/python (found version "2.7.11")
– Found Python interpreter version 2.7
– Found PythonLibs: /afs/slac/g/glast/ground/GLAST_EXT/redhat7-x86_64-64bit-gcc48/python/2.7.10/lib/libpython2.7.so (found version "2.7.11")
– Looking for GCCXML
– Looking for OpenGL
– Found OpenGL: /usr/lib64/libGL.so
– Looking for Kerberos 5
– Could NOT find KRB5 (missing: KRB5_LIBRARY KRB5_INCLUDE_DIR)
– Kerberos 5 not found. Switching off krb5 option
– Looking for LibXml2
– Found LibXml2: /afs/slac/g/glast/ground/GLAST_EXT/redhat7-x86_64-64bit-gcc48/python/2.7.10/lib/libxml2.so (found version "2.9.2")
– Looking for Castor
– Castor not found. Switching off castor/rfio option
– Looking for MySQL
– Could NOT find MYSQL (missing: MYSQL_INCLUDE_DIR MYSQL_LIBRARIES)
– MySQL not found. Switching off mysql option
– Looking for Oracle
– Oracle not found.
– Oracle: You can specify includes: -DORACLE_PATH_INCLUDES=/usr/include/oracle/10.2.0.3/client
– currently found includes:
– Oracle: You can specify libs: -DORACLE_PATH_LIB=/usr/lib/oracle/10.2.0.3/client/lib
– currently found libs: ORACLE_LIBRARY_OCCI-NOTFOUND;ORACLE_LIBRARY_CLNTSH-NOTFOUND;ORACLE_LIBRARY_LNNZ-NOTFOUND
– Oracle not found. Switching off oracle option
– Looking for ODBC
– ODBC not found. Switching off odbc option
– Looking for SQLite
– Found PkgConfig: /usr/bin/pkg-config (found version "0.27.1")
– Found Sqlite: /afs/slac/g/glast/ground/GLAST_EXT/redhat7-x86_64-64bit-gcc48/python/2.7.10/include
– Looking for FFTW3
– Looking for CFITSIO
– Found CFITSIO: /afs/slac/g/glast/ground/GLAST_EXT/redhat7-x86_64-64bit-gcc48/cfitsio/v3370/include
– Found CFITSIO version: 3.37
– Looking for XROOTD
– Downloading and building XROOTD version 3.3.6
– Performing Test CXX_HAS_Wno_duplicate_decl_specifier
– Performing Test CXX_HAS_Wno_duplicate_decl_specifier - Success
– Could NOT find LDAP (missing: LDAP_INCLUDE_DIR LDAP_LIBRARY)
– ldap library not found. Set variable LDAP_DIR to point to your ldap installation
– For the time being switching OFF 'ldap' option
– >>> Option 'chirp' not implemented yet! Signal your urgency to pere.mato@cern.ch
– >>> Option 'pch' not implemented yet! Signal your urgency to pere.mato@cern.ch
– Enabled support for: asimage astiff builtin_afterimage builtin_ftgl builtin_freetype builtin_glew builtin_pcre builtin_lzma builtin_xrootd cintex exceptions explicitlink fftw3 fitsio fortran gdml genvector gsl_shared mathmore memstat minuit2 opengl python reflex shadowpw shared sqlite table thread tmva unuran xft xml x11 xrootd
– Performing Test CXX_HAS_Wno_strict_aliasing
– Performing Test CXX_HAS_Wno_strict_aliasing - Success
– Performing Test CXX_HAS_Wno_ignored_qualifiers
– Performing Test CXX_HAS_Wno_ignored_qualifiers - Success
– Performing Test CXX_HAS_Wno_potentially_evaluated_expression
– Performing Test CXX_HAS_Wno_potentially_evaluated_expression - Success
– Performing Test C_HAS_Wno_uninitialized
– Performing Test C_HAS_Wno_uninitialized - Success
– Performing Test CXX_HAS_Wno_parentheses_equality
– Performing Test CXX_HAS_Wno_parentheses_equality - Success
Running /afs/slac/g/glast/ground/GLAST_EXT/redhat7-x86_64-64bit-gcc48/ROOT/root_v5.34.34-src/build/unix/compiledata.sh
Making include/compiledata.h
– 349/594 tutorials have been vetoed for various reasons
– Configuring done
– Generating done
– Build files have been written to: /afs/slac/g/glast/ground/GLAST_EXT/redhat7-x86_64-64bit-gcc48/ROOT/root_v5.34.34-build

cmake --build . --target install
(cmake -DCMAKE_INSTALL_PREFIX=/tmp/root -P cmake_install.cmake) unnecessary

redhat6-x86_64-64bit-gcc44

https://d35c7d8c.web.cern.ch/building-root
includes xrootd 3.3.6

cmake -Dalien:BOOL=off -Dbonjour:BOOL=OFF -Dbuiltin_freetype=ON -Dbuiltin_pcre:BOOL=ON -Dbuiltin_xrootd:BOOL=ON -Dcxx11:BOOL=OFF -Dcastor:BOOL=OFF -Ddcache:BOOL=OFF -Dfail-on-missing:BOOL=OFF -Dgdml:BOOL=ON -Dgfal:BOOL=OFF -Dglite:BOOL=OFF -Dgsl_shared:BOOL=ON -Dgviz:BOOL=OFF -Dhdfs:BOOL=OFF -Dminuit2:BOOL=ON -Dmonalisa:BOOL=OFF =Dopengl:BOOL=OFF -Dpgsql:BOOL=OFF -Dpythia6:BOOL=OFF -Dpythia8:BOOL=OFF -Drootfit:BOOL=ON -Drfio:BOOL=ON -Dsapdb:BOOL=OFF -Dsrp:BOOL=OFF -Dssl:BOOL=OFF -Dtable:BOOL=ON -Dtesting:BOOL=ON -Dunuran:BOOL=ON -Dx11:BOOL=ON -DORACLE_DIR=/usr/oracle -DORACLE_PATH_INCLUDES=/usr/oracle/rdbms/public -DORACLE_PATH_LIB=/usr/oracle/lib -DORACLE_OCI_VERSION=11 -DPYTHON_EXECUTABLE=$GLAST_EXT/python/2.7.10/bin/python -DPYTHON_INCLUDE_DIR=$GLAST_EXT/python/2.7.10/include/python2.7 -DPYTHON_LIBRARY=$GLAST_EXT/python/2.7.10/lib/libpython2.7.so -DMYSQL_DIR=$GLAST_EXT/mysql/5.1.39-gl2 -DMYSQL_CONFIG_EXECUTABLE=$GLAST_EXT/mysql/5.1.39-gl2/bin/mysql_config -DCFITSIO_INCLUDE_DIR=$GLAST_EXT/cfitsio/v3370/include -DCFITSIO_LIBRARY=$GLAST_EXT/cfitsio/v3370/lib/libcfitsio.so -DFFTW_INCLUDE_DIR=$GLAST_EXT/fftw/3.1.2-gl1/include -DFFTW_LIBRARY=$GLAST_EXT/fftw/3.1.2-gl1/lib/libfftw3.so $GLAST_EXT/ROOT/v5.34.34-src/root

Resulting Output:
– The C compiler identification is GNU 4.4.7
– The CXX compiler identification is GNU 4.4.7
– Check for working C compiler: /usr/bin/cc
– Check for working C compiler: /usr/bin/cc – works
– Detecting C compiler ABI info
– Detecting C compiler ABI info - done
– Check for working CXX compiler: /usr/bin/c++
– Check for working CXX compiler: /usr/bin/c++ – works
– Detecting CXX compiler ABI info
– Detecting CXX compiler ABI info - done
– The Fortran compiler identification is GNU
– Check for working Fortran compiler: /usr/bin/gfortran
– Check for working Fortran compiler: /usr/bin/gfortran – works
– Detecting Fortran compiler ABI info
– Detecting Fortran compiler ABI info - done
– Checking whether /usr/bin/gfortran supports Fortran 90
– Checking whether /usr/bin/gfortran supports Fortran 90 – yes
– Found GCC. Major version 4, minor version 4
– CMAKE_BUILD_TYPE: RelWithDebInfo
– Performing Test CXX_HAS_Wno-array-bounds
– Performing Test CXX_HAS_Wno-array-bounds - Success
– Performing Test CXX_HAS_Wno-strict-aliasing
– Performing Test CXX_HAS_Wno-strict-aliasing - Success
– Looking for include file pthread.h
– Looking for include file pthread.h - found
– Looking for pthread_create
– Looking for pthread_create - not found
– Looking for pthread_create in pthreads
– Looking for pthread_create in pthreads - not found
– Looking for pthread_create in pthread
– Looking for pthread_create in pthread - found
– Found Threads: TRUE
– Found a 64bit system
– Found GNU compiler collection
– Performing Test CXX_HAS_Wno_deprecated_declarations
– Performing Test CXX_HAS_Wno_deprecated_declarations - Success
– ROOT Platform: linux
– ROOT Architecture: linuxx8664gcc
– Build Type: RelWithDebInfo
– Compiler Flags: -pipe -m64 -Wall -W -Woverloaded-virtual -fPIC -pthread -Wno-deprecated-declarations
– Looking for ZLib
– Found ZLIB: /usr/lib64/libz.so (found version "1.2.3")
– Looking for LZMA
– Found LZMA includes at /usr/include
– Found LZMA library at /usr/lib64/liblzma.so
– Looking for X11
– Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so
– Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so - found
– Looking for gethostbyname
– Looking for gethostbyname - found
– Looking for connect
– Looking for connect - found
– Looking for remove
– Looking for remove - found
– Looking for shmat
– Looking for shmat - found
– Looking for IceConnectionNumber in ICE
– Looking for IceConnectionNumber in ICE - found
– Found X11: /usr/lib64/libX11.so
– X11_INCLUDE_DIR: /usr/include
– X11_LIBRARIES: /usr/lib64/libSM.so;/usr/lib64/libICE.so;/usr/lib64/libX11.so;/usr/lib64/libXext.so
– X11_Xpm_INCLUDE_PATH: /usr/include
– X11_Xpm_LIB: /usr/lib64/libXpm.so
– X11_Xft_INCLUDE_PATH: /usr/include
– X11_Xft_LIB: /usr/lib64/libXft.so
– X11_Xext_INCLUDE_PATH:
– X11_Xext_LIB: /usr/lib64/libXext.so
– Performing Test GIF_GifFileType_UserData
– Performing Test GIF_GifFileType_UserData - Success
– Found GIF: /usr/lib64/libgif.so (found version "4")
– Found TIFF: /usr/lib64/libtiff.so (found version "3.9.4")
– Found PNG: /usr/lib64/libpng.so (found version "1.2.49")
– Found JPEG: /usr/lib64/libjpeg.so
– Looking for GSL
– Found GSL: /usr/include (found suitable version "1.13", minimum required is "1.10")
– Looking for Python
– Found PythonInterp: /afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.10/bin/python (found version "2.7.10")
– Found Python interpreter version 2.7
– Found PythonLibs: /afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.10/lib/libpython2.7.so (found version "2.7.10")
– Looking for GCCXML
– Looking for OpenGL
– Found OpenGL: /usr/lib64/libGL.so
– Looking for Kerberos 5
– Found KRB5: /usr/lib64/libkrb5.so
– Looking for LibXml2
– Found LibXml2: /afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.10/lib/libxml2.so (found version "2.7.6")
– Looking for Castor
– Castor not found. Switching off castor/rfio option
– Looking for MySQL
– Found MYSQL: /afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39-gl2/include/mysql
– Looking for Oracle
– Found Oracle: /usr/oracle/lib/libocci.so;/usr/oracle/lib/libclntsh.so;/usr/oracle/lib/libnnz11.so
– Looking for ODBC
– Looking for SQLite
– Found PkgConfig: /usr/bin/pkg-config (found version "0.23")
– Found Sqlite: /afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.10/include
– Looking for FFTW3
– Looking for CFITSIO
– Found CFITSIO: /afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/cfitsio/v3370/include
– Found CFITSIO version: 3.37
– Looking for XROOTD
– Downloading and building XROOTD version 3.3.6
– Performing Test CXX_HAS_Wno_duplicate_decl_specifier
– Performing Test CXX_HAS_Wno_duplicate_decl_specifier - Success
– Found LDAP: /usr/include
– >>> Option 'chirp' not implemented yet! Signal your urgency to pere.mato@cern.ch
– >>> Option 'pch' not implemented yet! Signal your urgency to pere.mato@cern.ch
– Enabled support for: asimage astiff builtin_afterimage builtin_ftgl builtin_freetype builtin_glew builtin_pcre builtin_xrootd cintex exceptions explicitlink fftw3 fitsio fortran gdml genvector gsl_shared krb5 ldap mathmore memstat minuit2 mysql odbc opengl oracle python reflex shadowpw shared sqlite table thread tmva unuran xft xml x11 xrootd
– Performing Test CXX_HAS_Wno_strict_aliasing
– Performing Test CXX_HAS_Wno_strict_aliasing - Success
– Performing Test CXX_HAS_Wno_ignored_qualifiers
– Performing Test CXX_HAS_Wno_ignored_qualifiers - Success
– Performing Test CXX_HAS_Wno_potentially_evaluated_expression
– Performing Test CXX_HAS_Wno_potentially_evaluated_expression - Success
– Performing Test C_HAS_Wno_uninitialized
– Performing Test C_HAS_Wno_uninitialized - Success
– Performing Test CXX_HAS_Wno_parentheses_equality
– Performing Test CXX_HAS_Wno_parentheses_equality - Success
Running /afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/ROOT/v5.34.34-build/root/build/unix/compiledata.sh
Making include/compiledata.h
– 349/594 tutorials have been vetoed for various reasons
– Configuring done
– Generating done
– Build files have been written to: /afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/ROOT/v5.34.34

But upon building via
cmake --build .

cmake -DCMAKE_INSTALL_PREFIX=$GLAST_EXT/ROOT/v5.34.34-gl1 -P cmake_install.cmake

v5.34.03

snowleopard

Unpack ROOT source
update cmake scripts to replace m64 with m32, as the cmake initialiation seems to find 64 bit on bldmac02, but we want 32bit builds
Setup environment
- setenv PATH
- setenv PYTHONHOME
- setenv PYTHONPATH
mkdir install
mkdir build
cd build
cmake
make >& build.log &
make install

Windows-i386-32bit-vc90

Trying cmake builds

Obtain source and gunzip and untar
Open Command Prompt
C:\"Program Files\Microsoft Visual Studio 9.0"\Common7\Tools\vsvars32.bat
Make sure only one copy of Python is in your path
set LIB
set PATH
set INCLUDE
create a cmakeBuild subdirectory separate from the source
cmake -DCMAKE_INSTALL_PREFIX=C:\buildRoot\install -DCMAKE_BUILD_TYPE=Debug -G "Visual Studio 9 2008"
Edit the resulting CmakeCache.txt file to reflect the appropriate settings for our build - turning off odbc, turning on table, unran, minut2. Note roofit consistently fails on Windows due to a line too large error
Rerun cmake
Open the resulting ROOT.sln
Build ALL_BUILD
May need to perform INSTALL step separately (it is located under "CMakePredefinedTargets"

redhat5-i686-32bit-gcc41

Requires our MySQL installation, as well as Oracle
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.34.01-src.tar.gz and unpack, it will be dumped into a directory named "root"
Obtain xrootd source from the site:
Following instructions at ROOT website: http://root.cern.ch/drupal/content/installing-xrootd
build/unix/installXrootd.sh <installationDir> -v 3.2.4 -t <xroottarball>
export EXTRA_LDFLAGS=-pthread
add python bin dir to PATH
Run ./configure
./configure linux --fail-on-missing --enable-builtin-pcre --enable-krb5 --enable-mysql --with-mysql-incdir=$GLAST_EXT/mysql/5.1.39-gl1/include/mysql --with-mysql-libdir=$GLAST_EXT/mysql/5.1.39-gl1/lib/mysql --enable-xrootd --with-xrootd=$GLAST_EXT/xrootd/3.2.4/xrootd-3.2.4 --enable-python --with-python-incdir=$GLAST_EXT/python/2.7.2/include/python2.7 --with-python-libdir=$GLAST_EXT/python/2.7.2/lib --enable-reflex --enable-cintex --enable-roofit --enable-oracle --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$GLAST_EXT/gsl/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/gsl/gsl-1.10/lib > & config-rhel5.log &
make
May have to manually get by the libpyROOT.so link by copying the failed line and adding -pthread -lutil -Xlinker -explicit-dynamic
Then restart make and carry on to the end

v5.34.01

redhat5-i686-32bit-gcc41

Requires our MySQL installation, as well as Oracle
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.34.01-src.tar.gz and unpack, it will be dumped into a directory named "root"
Obtain xrootd source from the site:
Following instructions at ROOT website: http://root.cern.ch/drupal/content/installing-xrootd
build/unix/installXrootd.sh <installationDir> -v 3.2.4 -t <xroottarball>
Run ./configure
./configure linux --fail-on-missing --enable-builtin-pcre --enable-krb5 --enable-mysql --with-mysql-incdir=$GLAST_EXT/mysql/5.1.39-gl1/include/mysql --with-mysql-libdir=$GLAST_EXT/mysql/5.1.39-gl1/lib/mysql --enable-xrootd --with-xrootd=$GLAST_EXT/xrootd/3.2.4/xrootd-3.2.4 --enable-python --with-python-incdir=$GLAST_EXT/python/2.7.1-gl1/include/python2.7 --with-python-libdir=$GLAST_EXT/python/2.7.1-gl1/lib --enable-reflex --enable-cintex --enable-roofit --enable-oracle --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$GLAST_EXT/gsl/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/gsl/gsl-1.10/lib > & config-rhel5.log &
make

redhat5-x86_64-64bit-gcc41

Requires our MySQL installation, as well as Oracle
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.34.01-src.tar.gz and unpack, it will be dumped into a directory named "root"
Obtain xrootd source from the site:
Following instructions at ROOT website: http://root.cern.ch/drupal/content/installing-xrootd
build/unix/installXrootd.sh <installationDir> -v 3.2.4 -t <xroottarball>
Run ./configure (Note dropped Oracle support due to lack of true 64 bit oracle libs on rhel5-64 at SLAC, should be fine as oracle is only used for GR systems tests, and there no plans to port GR to rhel5-64)
./configure linuxx8664gcc --fail-on-missing --enable-builtin-pcre --enable-krb5 --enable-mysql --with-mysql-incdir=$GLAST_EXT/mysql/5.1.39-gl1/include/mysql --with-mysql-libdir=$GLAST_EXT/mysql/5.1.39-gl1/lib/mysql --enable-xrootd --with-xrootd=$GLAST_EXT/xrootd/xrootd-3.2.4 --enable-python --with-python-incdir=$GLAST_EXT/python/2.7.2/include/python2.7 --with-python-libdir=$GLAST_EXT/python/2.7.2/lib --enable-reflex --enable-cintex --enable-roofit --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathmore --with-fftw3-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$GLAST_EXT/gsl/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/gsl/gsl-1.10/lib >& config-rhel5-64-2.log &

redhat6-x86_64-64bit-gcc44

Similar to redhat5, using this configure step:

./configure linuxx8664gcc --fail-on-missing --enable-builtin-pcre --enable-krb5 --enable-mysql --with-mysql-incdir=$GLAST_EXT/mysql/5.1.39-gl2/include/mysql --with-mysql-libdir=$GLAST_EXT/mysql/5.1.39-gl2/lib/mysql --enable-xrootd --with-xrootd=$GLAST_EXT/xrootd/xrootd-3.2.4 --enable-python --with-python-incdir=$GLAST_EXT/python/2.7.2-gl4/include/python2.7 --with-python-libdir=$GLAST_EXT/python/2.7.2-gl4/lib --enable-reflex --enable-cintex --enable-roofit --enable-oracle --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathmore --with-fftw3-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc44/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc44/lib --with-gsl-incdir=$GLAST_EXT/gsl/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/gsl/gsl-1.10/lib >& config-rhel6.log &

Windows-i386-32bit-vc90

Note: No xrootd, as windows support has been dropped

Initial attempts to use the new cmake build failed, retreated to using the cygwin build system

Obtain the source from $GLAST_EXT/../srcExtLibs/root_v5.34.01.src.tar.gz
Unpack which will create a directory called root
Start up DOS Command prompt
set PATH=
set LIB=
set INCLUDE=
execute "C:\Program Files\Microsoft Visual Studio 9.0\Common7\Tools\vsvars32.bat"
run setupvc9.bat:
set ROOTSYS=C:\heather\buildRoot\root
set PYTHONDIR=C:\Python27
set PYTHONPATH=%ROOTSYS%\bin
set ROOTBUILD=debug
set LIB=C:\Program Files\Microsoft SDKs\Windows\v6.0A\Lib;%LIB%;%ROOTSYS%\lib
set PATH=C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Python25;%ROOTSYS%\bin;C:\Program Files\Microsoft SDKs\Windows\v6.0A\bin;%PATH%;%ROOTSYS%\lib
set INCLUDE=C:\Program Files\Microsoft SDKs\Windows\v6.0A\Include;include;%INCLUDE%
Start up cygwin: bash --login -i
cd $ROOTSYS
./configure win32 --enable-roofit --enable-minuit2 --enable-table --enable-python --disable-odbc --enable-gdml --enable-reflex --enable-cintex --with-fftw3-incdir=C:/heather/buildroot/fftw3/3.1.2/win32_vc90/include --with-fftw3-libdir=C:/heather/buildroot/fftw3/3.1.2/win32_vc90/lib --with-gccxml=C:/heather/buildroot/GCC_XML/bin --with-python-libdir=C:/Python27/libs --with-python-incdir=C:/Python27/include --enable-mathmore --with-gsl-incdir=C:/heather/buildroot/GSL/1.10/win32_vc90/include --with-gsl-libdir=C:/heather/buildrooot/GSL/1.10/win32_vc90/lib --enable-winrtdebug
Note the use of --enable-winrtdebug to set up a DEBUG build, leave off for OPT
make
set PATH=%ROOTSYS%\bin;%PATH and start up root

v5.26.00a-gl6

redhat6-x86_64-64bit-gcc44

Build on rhel6-64
Requires our MySQL installation, as well as Oracle
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl6-src.tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure: ./configure --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39/gcc4.4/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39/gcc4.4/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.2/gcc44/include/python2.7 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.2/gcc44/lib/python2.7/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc44/include --with-fftw3-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc44/lib --with-gsl-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gsl/gsl-1.10/include --with-gsl-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gsl/gsl-1.10/lib >&config-rhel6.log
Build by running "make >& build-rhel6.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/5.26.00a-gl6/gcc44/
README bin build-rhel6.log cint config-rhel6.log doc etc fonts icons include lib macros man test tutorials

v5.26.00a-gl3

Rebuild of pyRoot using v5.26.00a-gl2 source, but built against python 2.6.5

snowleopard-i386-32bit-gcc42

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl3.tar.gz and unpack, it will be dumped into a directory named "root"
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
setup your environment, where we have cd'd into the root directory created when the source was unpacked:
setenv GLAST_EXT /afs/slac/g/glast/ground/GLAST_EXT/snowleopard-i386-32bit-gcc42/
setenv ROOTSYS $PWD
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${ROOTSYS}/lib/root
setenv PATH ${GLAST_EXT}/python/2.6.5/gcc40/bin:/bin:/sbin:/usr/b
in:/usr/sbin:@sys/usr/bin:${ROOTSYS}/bin
setenv PYTHONHOME ${GLAST_EXT}/python/2.6.5/gcc40/lib/python2.6
setenv PYTHONPATH ${PYTHONHOME}:${ROOTSYS}/bin:${ROOTSYS}/lib:$
Unknown macro: {GLAST_EXT}
/python/2.6.5/gcc42/lib/python2.6/lib-dynload/$
/python/2.6.5/gcc42/lib/python2.6/lib-dynload/
setenv DYLD_LIBRARY_PATH ${ROOTSYS}/lib
Run configure:
./configure --disable-mysql --enable-python --with-python-incdir=$GLAST_EXT/python/2.6.5/gcc40/include/python2.6 --with-python-libdir=$GLAST_EXT/python/2.6.5/gcc42/lib/python2.6/config --enable-roofit --disable-odbc --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/ROOT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-gsl-incdir=$GLAST_EXT/ROOT/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/ROOT/gsl-1.10/lib --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc42/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc42/lib > & config-snowleopard.log &

Build by running "make >& build-snowleopard.log &"
libPyROOT.dylib must be rebuilt, due to a need to make it a "bundle" rather than "shared library":
cd into pyroot/src directory and do:
g++ -flat_namespace -bundle *.o -bundle_loader $GLAST_EXT/python/2.6.5/gcc42/bin/python -L$ROOTSYS/lib -ldl -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lMatrix -lMathCore -lThread -lReflex -L$GLAST_EXT/python/2.6.5/gcc42/lib/python2.6/config -lpython2.6 -o libPyROOT.so
See: https://savannah.cern.ch/bugs/index.php?22003
The *.dylib files will have their references to other ROOT libraries hard-coded. This must be fixed before the libraries can be distributed. Both the ids and the ROOT libraries referenced must be updated.
1. First check the id and references using:
  otool -L name.dylib. i.e. otool -L libCint.dylib
2. Next update the id using the command:
  install_name_tool -id newID fileName i.e. install_name_tool -id libCint.dylib libCint.dylib
3. For any ROOT libraries referenced do:
  install_name_tool -change oldName newName fileName i.e install_name_tool -change $ROOTSYS/lib/libNet.dylib libNet.dylib libPyROOT.dylib
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl2/gcc42/
README bin build-tiger.log cint config-tiger.log doc etc fonts icons include lib macros man test tutorials

v5.26.00a-gl2

Patch to TMVA's Reader.cxx included in v5.26.00b

redhat6-x86_64-64bit-gcc44

Build on rhel6-64
Requires our MySQL installation, as well as Oracle
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure: ./configure --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39/gcc4.4/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/mysql/5.1.39/gcc4.4/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.2/gcc4.4/include/python2.7 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/python/2.7.2/gcc4.4/lib/python2.7/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc4.4/include --with-fftw3-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/fftw/3.1.2/gcc4.4/lib --with-gsl-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gsl/gsl-1.10/include --with-gsl-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat6-x86_64-64bit-gcc44/gsl/gsl-1.10/lib >&config-rhel6.log
If ./include/TGGC.h file doesn't exists or is an empty file then "cp ./gui/gui/inc/TGGC.h to ./include"

Build by running "make >& build-rhel6.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/5.26.00a-gl2/gcc44/
README bin build-rhel6.log cint config-rhel6.log doc etc fonts icons include lib macros man test tutorials

tiger-i386-32bit-gcc40

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
setup your environment, where we have cd'd into the root directory created when the source was unpacked:
setenv GLAST_EXT /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/
setenv ROOTSYS $PWD
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${ROOTSYS}/lib/root
setenv PATH ${GLAST_EXT}/python/2.5.1-gl3/gcc40/bin:/bin:/sbin:/usr/b
in:/usr/sbin:@sys/usr/bin:${ROOTSYS}/bin
setenv PYTHONHOME ${GLAST_EXT}/python/2.5.1-gl3/gcc40/lib/python2.5
setenv PYTHONPATH ${PYTHONHOME}:${ROOTSYS}/bin:${ROOTSYS}/lib
setenv DYLD_LIBRARY_PATH ${ROOTSYS}/lib
Run configure:
./configure --disable-mysql --enable-python --with-python-incdir=/afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/include/python2.5 --with-python-libdir=/afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl4/gcc40/lib/python2.5/config --enable-roofit --disable-odbc --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/ROOT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-gsl-incdir=$GLAST_EXT/ROOT/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/ROOT/gsl-1.10/lib --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc40/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc40/lib > & config-tiger.log &

Build by running "make >& build-tiger.log &"
libPyROOT.dylib must be rebuilt, due to a need to make it a "bundle" rather than "shared library":
cd into pyroot/src directory and do:
g++ -flat_namespace -bundle *.o -bundle_loader $GLAST_EXT/python/2.5.1-g3/gcc40/bin/python -L$ROOTSYS/lib -ldl -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lMatrix -lMathCore -lThread -lReflex -L$GLAST_EXT/python/2.5.1-gl3/gcc40/lib/python2.5/config -lpython2.5 -o libPyROOT.dylib
See: https://savannah.cern.ch/bugs/index.php?22003
The *.dylib files will have their references to other ROOT libraries hard-coded. This must be fixed before the libraries can be distributed. Both the ids and the ROOT libraries referenced must be updated.
1. First check the id and references using:
  otool -L name.dylib. i.e. otool -L libCint.dylib
2. Next update the id using the command:
  install_name_tool -id newID fileName i.e. install_name_tool -id libCint.dylib libCint.dylib
3. For any ROOT libraries referenced do:
  install_name_tool -change oldName newName fileName i.e install_name_tool -change $ROOTSYS/lib/libNet.dylib libNet.dylib libPyROOT.dylib
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl2/gcc40/
README bin build-tiger.log cint config-tiger.log doc etc fonts icons include lib macros man test tutorials

snowleopard-i386-32bit-gcc42

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl2.tar.gz and unpack, it will be dumped into a directory named "root"
setup your environment, where we have cd'd into the root directory created when the source was unpacked:
setenv GLAST_EXT /afs/slac/g/glast/ground/GLAST_EXT/snowleopard-i386-32bit-gcc42/
setenv ROOTSYS $PWD
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${ROOTSYS}/lib/root
setenv PATH ${GLAST_EXT}/python/2.6.5/gcc40/bin:/bin:/sbin:/usr/b
in:/usr/sbin:@sys/usr/bin:${ROOTSYS}/bin
setenv PYTHONHOME ${GLAST_EXT}/python/2.6.5/gcc40/lib/python2.6
setenv PYTHONPATH ${PYTHONHOME}:${ROOTSYS}/bin:${ROOTSYS}/lib
setenv DYLD_LIBRARY_PATH ${ROOTSYS}/lib
Run configure:
./configure --disable-mysql --enable-python --with-python-incdir=$GLAST_EXT/python/2.6.5/gcc40/include/python2.6 --with-python-libdir=$GLAST_EXT/python/2.6.5/gcc40/lib/python2.6/config --enable-roofit --disable-odbc --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$GLAST_EXT/ROOT/gccxml/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-gsl-incdir=$GLAST_EXT/ROOT/gsl-1.10/include --with-gsl-libdir=$GLAST_EXT/ROOT/gsl-1.10/lib --with-fftw3-incdir=$GLAST_EXT/fftw/3.1.2/gcc40/include/fftw --with-fftw3-libdir=$GLAST_EXT/fftw/3.1.2/gcc40/lib > & config-snowleopard.log &

Build by running "make >& build-snowleopard.log &"
libPyROOT.dylib must be rebuilt, due to a need to make it a "bundle" rather than "shared library":
cd into pyroot/src directory and do:
g++ -flat_namespace -bundle *.o -bundle_loader $GLAST_EXT/python/2.5.1-g3/gcc40/bin/python -L$ROOTSYS/lib -ldl -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lMatrix -lMathCore -lThread -lReflex -L$GLAST_EXT/python/2.5.1-gl3/gcc40/lib/python2.5/config -lpython2.5 -o libPyROOT.dylib
See: https://savannah.cern.ch/bugs/index.php?22003
The *.dylib files will have their references to other ROOT libraries hard-coded. This must be fixed before the libraries can be distributed. Both the ids and the ROOT libraries referenced must be updated.
1. First check the id and references using:
  otool -L name.dylib. i.e. otool -L libCint.dylib
2. Next update the id using the command:
  install_name_tool -id newID fileName i.e. install_name_tool -id libCint.dylib libCint.dylib
3. For any ROOT libraries referenced do:
  install_name_tool -change oldName newName fileName i.e install_name_tool -change $ROOTSYS/lib/libNet.dylib libNet.dylib libPyROOT.dylib
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl2/gcc42/
README bin build-tiger.log cint config-tiger.log doc etc fonts icons include lib macros man test tutorials

v5.26.00a-gl1

Includes patch to TMVA Config.h and Config.cxx for windows

redhat5-x86_64-64bit-gcc41

Build on rhel5-64
Requires our MySQL installation, as well as Oracle
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure:
./configure --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/mysql/5.1.39/gcc41/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/mysql/5.1.39/gcc41/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/python/2.5.1-gl1/gcc41/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-x86_64-64bit-gcc41/python/2.5.1-gl1/gcc41/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$workDir/gaudi-external-v21r7-rhel5/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/../redhat5-x86_64-64bit-gcc41/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/../redhat5-x86_64-64bit-gcc41/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$workDir/gaudi-external-v21r7-rhel5/gsl-1.10/include --with-gsl-libdir=$workDir/gaudi-external-v21r7-rhel5/gsl-1.10/lib >&config-redhat5.log
Build by running "make >& build-rhel5.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl1/gcc41/
README bin build-rhel5.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials

redhat5-i686-32bit-gcc41

Build on rhel5-32 or bldlnx09
Requires our MySQL installation, as well as Oracle
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl; ./configure --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/mysql/5.1.39/gcc41/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/mysql/5.1.39/gcc41/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/python/2.5.1-gl1/gcc41/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat5-i686-32bit-gcc41/python/2.5.1-gl1/gcc41/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$workDir/gaudi-external-v21r7-rhel5/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/../redhat5-i686-32bit-gcc41/fftw/3.1.2/gcc41/include/fftw --with-fftw3-libdir=$GLAST_EXT/../redhat5-i686-32bit-gcc41/fftw/3.1.2/gcc41/lib --with-gsl-incdir=$workDir/gaudi-external-v21r7-rhel5/gsl-1.10/include --with-gsl-libdir=$workDir/gaudi-external-v21r7-rhel5/gsl-1.10/lib >&config-redhat5.log
Build by running "make >& build-rhel5.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl1/gcc41/
README bin build-rhel5.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials

redhat4-x86_64-64bit-gcc34

Build on rhel4-64
Requires our MySQL installation, as well as Oracle
Need fftw3, gccxml, GSL to be built. Obtain FFTW 3.1.2 from GLAST_EXT
Obtain GSL 1.10 from: http://www.gnu.org/software/gsl/&nbsphttp://www.gnu.org/software/gsl/; ./configure CFLAGS="-fPIC" --prefix=$PWD "make" "make install"
obtain gccxml 0.9.0_20090601 from http://lcgsoft.cern.ch/index.py?page=pkg_version&pkg=gccxml&vers=0.9.0_20090601 require cmake to build: http://www.cmake.org/cmake/resources/software.html
mkdir gccxml-build
cd gccxml-build
cmake -DCMAKE_INSTALL_PREFIX:PATH=$PWD ../gccxml (where gccxml contains the downloaded source)
make
make install
Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
run ./configure (note that "linux" is left unspecified)
./configure --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/mysql/5.1.39/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/mysql/5.1.39/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$workDir/gaudi-external-v21r7-rhel4-64/gccxml-build/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=$GLAST_EXT/../redhat4-x86_64-64bit-gcc34/fftw/3.1.2/gcc34/include/fftw --with-fftw3-libdir=$GLAST_EXT/../redhat4-x86_64-64bit-gcc34/fftw/3.1.2/gcc34/lib --with-gsl-incdir=$workDir/gaudi-external-v21r7-rhel4-64/gsl-1.10/include --with-gsl-libdir=$workDir/gaudi-external-v21r7-rhel4-64/gsl-1.10/lib > & config-redhat4.log &
Build by running "make >& build-rhel4.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl1/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials

redhat4-i686-32bit-gcc34

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/5.1.39/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/5.1.39/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$userSpace/root-v5.26-gl1/gccxml/0.9.0_20090601/slc4_ia32_gcc34/bin --enable-gdml --enable-genvector --enable-mathcore --enable-mathmore --with-fftw3-incdir=$userSpace/root-v5.26-gl1/fftw3/3.1.2/slc4_ia32_gcc34/include --with-fftw3-libdir=$userSpace/root-v5.26-gl1/fftw3/3.1.2/slc4_ia32_gcc34/lib --with-gsl-incdir=$userSpace/root-v5.26-gl1/GSL/1.10/slc4_ia32_gcc34/include --with-gsl-libdir=$userSpace/root-v5.26-gl1/GSL/1.10/slc4_ia32_gcc34/lib > & config-rhel4.log &
Build by running "make >& build-rhel4.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.26.00a-gl1/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials

Windows

If cygwin is not already installed, installcygwin including gcc, make, etc NOTE: cygwin's link.exe application must be renamed, so that VC's link will be used for the build.
http://root.cern.ch/twiki/bin/view/ROOT/PatchesV5-14-00

Python 2.5.1 for windows, FFTW 3.1.2 from http://www.fftw.org/install/windows.html, obtained gccxml from Gaudi v21r7 distribution
downloaded gccxml from http://www.gccxml.org/HTML/Index.html

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.26.00a-gl1.src..tar.gz and unpack, it will be dumped into a directory named "root"
In a DOS window
set PATH=
set LIB=
set INCLUDE=
"C:\Program Files\Microsoft Visual Studio .NET 2003\Common7\Tools\vsvars32.bat"
set ROOTSYS=C:\heather\root-v5.20-gl1\root
set PYTHONDIR=C:\heather\glast\extlib\python\2.5.1-gl1\vc71
set PYTHONPATH=%ROOTSYS%\bin
set ROOTBUILD=opt
set LIB=C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2\Lib;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\Lib;%LIB%;%ROOTSYS%\lib
set PATH=C:\heather\glast\extlib\python\2.5.1-gl1\vc71;%ROOTSYS%\bin;C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2\Bin;C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2\Lib;%PATH%;%ROOTSYS%\lib
set INCLUDE=C:\Program Files\Microsoft Platform SDK for Windows Server 2003 R2\Include;C:\Program Files\Microsoft Visual Studio 8\SDK\v2.0\include;%INCLUDE%
Start up cygwin: bash --login -i
Run ./confgure:
./configure win32 --enable-roofit --enable-minuit2 --enable-table --enable-python --enable-gdml --enable-unuran --disable-odbc --enable-mathmore --enable-genvector --enable-tmva --enable-reflex --enable-cintex --enable-xrootd --with-fftw3-incdir=C:/heather/root-v5.20-gl1/fftw3/3.1.2/win32_vc71/include --with-fftw3-libdir=C:/heather/root-v5.20-gl1/fftw3/3.1.2/win32_vc71/lib --with-gccxml=C:/heather/root-v5.20-gl1/GCC_XML/0.9.0_20090601/win32_vc71/bin --with-python-libdir=C:/heather/glast/extlib/python/2.5.1-gl1/vc71/libs --with-python-incdir=C:/heather/glast/extlib/python/2.5.1-gl1/vc71/include
make

v5.22.00e-gl1

Includes updated xrootd from Wilko (same as in v5.20.00-gl5)

redhat4-i686-32bit-gcc34

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.22.00e-gl1.tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/5.1.39/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/5.1.39/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink --with-gccxml=$userSpace/gaudi_v21r4/gccxml/0.9.0_20090601/slc4_ia32_gcc34/bin --enable-gdml > & config-rhel4.log &
Build by running "make >& build-rhel4.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.22.00e-gl1/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials

v5.20.00-gl5

We ran into a problem this time with distribution of our linux build for ROOT. It seems prefix cannot be used, so we must set the ROOTSYS env var for our build. make install no longer seems to work unless prefix is used, so we are left to prune the resulting ROOT build directories on our own.

redhat4-x86_64-64bit-gcc34

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure:
./configure linuxx8664gcc --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/mysql/4.1.18/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/mysql/4.1.18/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-x86_64-64bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink > & config-rhel4.log &
Build by running "make >& build-rhel4.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.20.00-gl4/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials

redhat3-i686-32bit-gcc32

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit-gcc32/mysql/4.1.18/gcc32/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit-gcc32/mysql/4.1.18/gcc32/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit-gcc32/python/2.5.1-gl1/gcc32/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat3-i686-32bit-gcc32/python/2.5.1-gl1/gcc32/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink > & config-rhel3.log &
Build by running "make >& build-rhel3.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.20.00-gl4/gcc32/
README bin build-rhel3.log cint config-rhel3.log doc etc fonts icons include lib macros man test tutorials

redhat4-i686-32bit-gcc34

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
set ROOTSYS to the same directory as the source was checked out into. cd into the root directory
Run configure:
./configure linux --fail-on-missing --enable-mysql --with-mysql-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/4.1.18/gcc34/include/mysql --with-mysql-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/mysql/4.1.18/gcc34/lib/mysql --enable-xrootd --enable-python --with-python-incdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/include/python2.5 --with-python-libdir=/afs/slac/g/glast/ground/GLAST_EXT/redhat4-i686-32bit-gcc34/python/2.5.1-gl1/gcc34/lib/python2.5/config --enable-reflex --enable-cintex --enable-roofit --with-oracle-incdir=/usr/oracle/rdbms/public --with-oracle-libdir=/usr/oracle/lib --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink > & config-rhel4.log &
Build by running "make >& build-rhel4.log &"
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.20.00-gl4/gcc34/
README bin build-rhel4.log cint config-rhel4.log doc etc fonts icons include lib macros man test tutorials

tiger-i386-32bit-gcc40

Obtain Fermi's copy of the source from /afs/slac/g/glast/ground/GLAST_EXT/srcExtlibs/root-v5.20.00-gl5.tar.gz and unpack, it will be dumped into a directory named "root"
setup your environment, where we have cd'd into the root directory created when the source was unpacked:
setenv GLAST_EXT /afs/slac/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/
setenv ROOTSYS $PWD
setenv LD_LIBRARY_PATH ${ROOTSYS}/lib:${ROOTSYS}/lib/root
setenv PATH ${GLAST_EXT}/python/2.5.1-gl3/gcc40/bin:/bin:/sbin:/usr/b
in:/usr/sbin:@sys/usr/bin:${ROOTSYS}/bin
setenv PYTHONHOME ${GLAST_EXT}/python/2.5.1-gl3/gcc40/lib/python2.5
setenv PYTHONPATH ${PYTHONHOME}:${ROOTSYS}/bin:${ROOTSYS}/lib
setenv DYLD_LIBRARY_PATH ${ROOTSYS}/lib
Run configure:
./configure --disable-mysql --enable-python --with-python-incdir=/afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl3/gcc40/include/python2.5 --with-python-libdir=/afs/slac.stanford.edu/g/glast/ground/GLAST_EXT/tiger-i386-32bit-gcc40/python/2.5.1-gl3/gcc40/lib/python2.5/config --enable-roofit --disable-odbc --enable-minuit2 --enable-unuran --enable-table --enable-explicitlink >& config-tiger.log &
Build by running "make >& build-tiger.log &"
libPyROOT.dylib must be rebuilt, due to a need to make it a "bundle" rather than "shared library":
cd into pyroot/src directory and do:
g++ -flat_namespace -bundle *.o -bundle_loader $GLAST_EXT/python/2.5.1-g3/gcc40/bin/python -L$ROOTSYS/lib -ldl -lCore -lCint -lRIO -lNet -lHist -lGraf -lGraf3d -lGpad -lTree -lMatrix -lMathCore -lThread -lReflex -L$GLAST_EXT/python/2.5.1-gl3/gcc40/lib/python2.5/config -lpython2.5 -o libPyROOT.dylib
See: https://savannah.cern.ch/bugs/index.php?22003
The *.dylib files will have their references to other ROOT libraries hard-coded. This must be fixed before the libraries can be distributed. Both the ids and the ROOT libraries referenced must be updated.
1. First check the id and references using:
  otool -L name.dylib. i.e. otool -L libCint.dylib
2. Next update the id using the command:
  install_name_tool -id newID fileName i.e. install_name_tool -id libCint.dylib libCint.dylib
3. For any ROOT libraries referenced do:
  install_name_tool -change oldName newName fileName i.e install_name_tool -change $ROOTSYS/lib/libNet.dylib libNet.dylib libPyROOT.dylib
Update etc/system.rootrc to include the lines:
# As suggested by Wilko, April, 2009, so that when a job writes to xrootd, missing directories are created upon request.
XNet.Mkpath: 1
Copy the following into $GLAST_EXT using the directory structure:
ROOT/v5.20.00-gl4/gcc40/
README bin build-tiger.log cint config-tiger.log doc etc fonts icons include lib macros man test tutorials

Space shortcuts

Child pages

Requirements

v5.34.34

redhat7-x86_64-64bit-gcc48

redhat6-x86_64-64bit-gcc44

v5.34.03

Windows-i386-32bit-vc90

redhat5-i686-32bit-gcc41

v5.34.01

redhat5-i686-32bit-gcc41

redhat5-x86_64-64bit-gcc41

redhat6-x86_64-64bit-gcc44

Windows-i386-32bit-vc90

v5.26.00a-gl6

redhat6-x86_64-64bit-gcc44

v5.26.00a-gl3

snowleopard-i386-32bit-gcc42

v5.26.00a-gl2

redhat6-x86_64-64bit-gcc44

tiger-i386-32bit-gcc40

snowleopard-i386-32bit-gcc42

v5.26.00a-gl1

redhat5-x86_64-64bit-gcc41

redhat5-i686-32bit-gcc41

redhat4-x86_64-64bit-gcc34

redhat4-i686-32bit-gcc34

Windows

v5.22.00e-gl1

redhat4-i686-32bit-gcc34

v5.20.00-gl5

redhat4-x86_64-64bit-gcc34

redhat3-i686-32bit-gcc32

redhat4-i686-32bit-gcc34

tiger-i386-32bit-gcc40

Space shortcuts

Child pages

Building ROOT

Requirements

v5.34.34

redhat7-x86_64-64bit-gcc48

redhat6-x86_64-64bit-gcc44

v5.34.03

Windows-i386-32bit-vc90

redhat5-i686-32bit-gcc41

v5.34.01

redhat5-i686-32bit-gcc41

redhat5-x86_64-64bit-gcc41

redhat6-x86_64-64bit-gcc44

Windows-i386-32bit-vc90

v5.26.00a-gl6

redhat6-x86_64-64bit-gcc44

v5.26.00a-gl3

snowleopard-i386-32bit-gcc42

v5.26.00a-gl2

redhat6-x86_64-64bit-gcc44

tiger-i386-32bit-gcc40

snowleopard-i386-32bit-gcc42

v5.26.00a-gl1

redhat5-x86_64-64bit-gcc41

redhat5-i686-32bit-gcc41

redhat4-x86_64-64bit-gcc34

redhat4-i686-32bit-gcc34

Windows

v5.22.00e-gl1

redhat4-i686-32bit-gcc34

v5.20.00-gl5

redhat4-x86_64-64bit-gcc34

redhat3-i686-32bit-gcc32

redhat4-i686-32bit-gcc34

tiger-i386-32bit-gcc40