Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
Open new terminal
$ cd /u1/coda_rth
$ ./start_rc
Open new terminal
$ cd /u1/coda_rth
$ sudo ./start_eb [do we really need sudo here to access et file?]
Open new terminal
$ cd /u1/coda_rth
$ sudo ./start_er
Open new terminal
$ cd /u1/coda_rth
$ sudo ./start_et
If running Sergey's binaries need make sure that /usr/local is a symbolic link pointing to /usr/new_local. This maybe need to be updated every day (wiped by Taylor)
Connect to DTM/DPM and start ROCs: in separate tabs/terminals
$ cd /u1/daq
$ source setup_env.csh
$ ./rceScripts/connect_host <slot> <?> <?> (FIX NAMES OF ID's)
$ /mnt/host/coda/run_roc
There is a script that pops up all windows in xterms:
$ cd /u1/coda_rth
$ ./start_rce.csh
Start rce GUI
$ cd /u1/daq
$ ./rceScripts/start_gui.csh
If it fails to connect check that server is running on dpm7 and restart if needed
$ ssh dpm7
$ cd /mnt/host/daq
$ ./rceScripts/start_server.csh
Click 'connect' on RC GUI. Click 'configure' then select '8rces' as run type. Click 'Config' and select '/u1/coda/rcetest0.cfg'. Click 'OK'.
Click 'Download'. 'Prestart' button appears if things worked.
Go to TI and Reset (but don't start sending triggers)
Click 'Prestart'.
Click 'Go'.
Go to TI and start sending triggers.
Open new terminal.
$ cd /u1/daq & source setup_env.csh
$ ./rceScripts/connect_ti.csh (pw ask Pelle/Ryan/Ben)
$ cd /home/daq/linuxvme/tid/src
$ ./tidInt_test
Change trigger rate by modifying tidInt_test.c: tidSoftTrig(0xffff,0xFFFF,1);
$ cd /u1/daq & source setup_env.csh
$ ./rceScripts/connect_ti.csh (pw ask Pelle/Ryan/Ben)
$ cd ti/test
$ ./tiLibTest
TBI
Host | slot | ? | ? |
---|---|---|---|
dtm | 4 | 1 | 0 |
dpm0 | 1 | 0 | 0 |
1 | 0 | 2 | |
1 | 1 | 0 | |
1 | 1 | 2 | |
1 | 2 | 0 | |
1 | 2 | 2 | |
1 | 3 | 0 | |
dpm7 | 1 | 3 | 2 |