AstroRT and LICOS

Herein lies the procedure to interface LICOS and AstroRT at SLAC:

1. Log into Spectrum PC. Obtain the password from Jana, Gregg or Bryson
2. Double-click the icon labeled "Glast AstroRT V2"
3. Double-click the line in the info box "Spacecraft"
4. Double click the line in the new info box "Spacecraft"
5. From the "GLAST Main Menu" GUI, select the menu sequence:
   "Commanding" → "Select/Send Command"
6. Examine the "GLAST Main Menu" GUI, make sure that apIDs > 500 are appearing. If not, recable
7. From the new "Command Selection" GUI, select the menu sequence:
   "TCP/IP" → "Connect"
8. From the "GLAST Main Menu" GUI, execute the menu sequence:
   "Application" → "Science DAQ"
9. From the new "LVDS DAQ Main" GUI, execute the menu sequence:
   "TCP/IP" → "Connect"
10. From the "GLAST Main Menu" GUI, execute the menu sequence:
    "Application" → "LICOS I&T Server"
11. Log into lat-balrog. Obtain an account from Jim or Bryson if needed.
12. lat-balrog: Set up a workdir if needed. Copy configurations from ~panetta/Online/workdir if needed.
13. lat-balrog: Start AstroRT Interface proxy:
    $ONLINE_ROOT/LICOS_ETC/start/astroRtIf.csh --astroConfig astroTest.cfg --vscConfig vsc.cfg
14. Spectrum PC: Wait for <???> light on "LICOS CMD_Server" GUI to turn green.
15. Spectrum PC: From the "LICOS CMD_Server" GUI, select the menu sequence:
    "Options" → "OTCC Ready?" → "Ready"
16. lat-balrog: Start Telem and Diag proxies with --vscip pointing to localhost.
17. lat-balrog: Start ScriptEngine with --server pointing to localhost