CODA @ SLAC

Starting from scratch

Open new terminal

$ cd /u1/coda_rth
$ ./start_rc 

Open new terminal

$ cd /u1/coda_rth
$ source setup_env.csh

If running Sergey's binaries need  make sure that /usr/local is a symbolic link pointing to /usr/local_new. This  maybe  need to be updated every day (wiped by Taylor)

$ sudo ./start_eb [do we really need sudo here to access et file?]

Open new terminal

$ cd /u1/coda_rth
$ sudo ./start_eb

Start rce GUI

$ cd /u1/daq
$ source setup_env.csh 
$ ./rceScripts/start_gui.sh

Connect to DTM/DPM and start ROCs:  in separate tabs/terminals

$ cd /u1/daq
$ source setup_env.csh 
$ ./rceScripts/connect_host <slot> <?> <?> (FIX NAMES OF ID's)
$ /mnt/host/coda/run_roc 

Click 'connect' on RC GUI.  Click 'configure' then select 'pelle0' as run type.  Click 'Config' and select '/u1/coda/rcetest0.cfg'.  Click 'OK'.

Click 'Download'. 'Prestart' button appears if things worked.

Click 'Prestart'.

Click 'Go'.

Trigger setup

Option 1: Send software triggers from TS

$ cd /u1/daq & soruce setup_env.csh
$ ./rceScripts/connect_ti.csh (pw ask Pelle/Ryan/Ben)
$ cd  /home/daq/linuxvme/tid/src
$ ./tidInt_test

Change trigger rate by modifying tidInt_test.c: tidSoftTrig(0xffff,0xFFFF,1);

Option 2: Send triggers to TS from  function generator

TBI