How to find out which calibration constants were used ?
Example : CAL calib constants
Here's one way (by Dave Smith). From the eLog, click on "list root files" to find the name of the directory on noric where the recon files are. In that directory, you can do a grep. For example,
dsmith@noric06 $ cd /nfs/farm/g/glast/u37/BeamTest06/rootData/700000698/v4r0909p2/recon
dsmith@noric06 $ grep asym *.log
recon-v1r030603p4_700000698_00000-07469.log:XmlBaseCnv INFO successfully parsed document $(LATCalibRoot)/CAL/CU06/mc_asym.jun8th2006.CU_pass1_Pisa.xml aka /afs/slac.stanford.edu/g/glast/ground/releases/calibrations//CAL/CU06/mc_asym.jun8th2006.CU_pass1_Pisa.xml
recon-v1r030603p4_700000698_07470-14939.log:XmlBaseCnv INFO successfully parsed document $(LATCalibRoot)/CAL/CU06/mc_asym.jun8th2006.CU_pass1_Pisa.xml aka /afs/slac.stanford.edu/g/glast/ground/releases/calibrations//CAL/CU06/mc_asym.jun8th2006.CU_pass1_Pisa.xml
recon-v1r030603p4_700000698_14940-22409.log:XmlBaseCnv INFO successfully parsed document $(LATCalibRoot)/CAL/CU06/mc_asym.jun8th2006.CU_pass1_Pisa.xml aka /afs/slac.stanford.edu/g/glast/ground/releases/calibrations//CAL/CU06/mc_asym.jun8th2006.CU_pass1_Pisa.xml
dsmith@noric06 $
You can do the same for the other 4 types of CAL calib.xml files that are used in recon, e.g. ci_intnonlin, peds, mpd, thold.
CAL calibrations
Trending CAL CPTs
Here is the trendiing of CU CAL module performances from CPTs runs taken at Pisa (2 suites) and at CERN (July, 7) : T01-FM109, T02-FM119and T03-FM101 : no evolution was found
ACD calibrations
Describes policy and steps for updating