Reason for change
This is the version needed for Pass7. The switchover is planned for Monday, August 1st.
This is the version for PASS7_V6:
- adding electronMerit, electronFT1, extendedFT1, extendedLS1
- new GR, new monitoring tags, new cuts, new diffRsp
- removing Livetime Cubes, CompareDigiFastMon
Test Procedure
We have processed LPA and LCI runs in the DEV pipeline with this version of L1Proc.
We fully reprocessed a few hours of data from January 2011: http://glast-ground.slac.stanford.edu/Pipeline-II/si.jsp?stream=1877613&dataSourceMode=Dev
Rollback procedure
We can easily switch back to the previous version of L1Proc before the FSSC switches over to the new photon database (we probably have a few hours to rollback, if needed). This would have to be coordinated with ASP.
CCB Jira
Details
L1Pipeline: L1Pipeline-02-09-00
- adding electronMerit, electronFT1, extendedFT1, extendedLS1
- new GR, new monitoring tags, new cuts, new diffRsp
- removing Livetime Cubes, CompareDigiFastMon
ScienceTools: ScienceTools-09-24-00
- several bugfixes taking care of the problem with gtdiffrsp
GlastRelease: GlastRelease-v17r35p23
- the transition from the v15r47 series is very significant
- here's the complete list of changes
- we think we understand the most relevant differences in systest
evtClassDefs: evtClassDefs-00-19-04
- adding cut files for P7V6 to be used in L1Proc
dataMonitoring/AlarmsCfg: AlarmsCfg-06-00-01
- a couple of small changes to the limits on the normalized rates for the p7 release.
- two alarms on the diffuse rates removed (they're not there anymore in Pass7).
dataMonitoring/Common: Common-06-10-04
- minor change to avoid a crash when a given branch in a trending tree is not found.
dataMonitoring/DigiReconCalMeritCfg: DigiReconCalMeritCfg-01-20-00
- modifications in the configuration files to deal with the new P7 variables GDQMQ-355@JIRA
- changes in config files to monitor the LLE events vs RA nd DEC GDQMQ-352@JIRA
- change in config file to add hit rates, normrates and GEM veto for tile 63 GDQMQ-356@JIRA
- compute Pass7 output monitoring variables in a different way; this fixes a problem when reading pass7 variables
- variables with zenith cut 60 deg were removed; variables with zenith cut 100 deg were added; naming convention was changed to keep consistency
- renaming the LLE quantities; added zenith angle cut to the LLE BinsRaDec quantities
svac/Monitor: Monitor-01-09-01
- changes in code to deal with the new variable rates with P7
- changes in code to monitor the LLE events vs RA nd DEC
- modifications in the code in order to properly retrieve and compute some of the Pass7 monitoring variables.
Complete set of tags for L1Proc 2.9
GlastRelease (sim/recon): GlastRelease-v17r35p23
ScienceTools (Level 2): ScienceTools-09-24-00
svac/L1Pipeline: L1Pipeline-02-09-00
calibTkrUtil: v2r9p1
calibGenTKR: v4r5
dataMonitoring/AlarmsCfg: AlarmsCfg-06-00-01
dataMonitoring/Common: Common-06-10-04
dataMonitoring/DigiReconCalMeritCfg: DigiReconCalMeritCfg-01-20-00
dataMonitoring/FastMon: FastMon-05-02-01
dataMonitoring/FastMonCfg: FastMonCfg-02-01-01
datMonitoring/IGRF: IGRF-02-01-00
svac/Monitor: Monitor-01-09-01
svac/EngineeringModelRoot: v4r4
svac/TestReport: TestReport-11-04-00
users/richard/pipelineDatasets: v0r6
ft2Util: v1r2p31
evtClassDefs: evtClassDefs-00-19-04
GPLtools: GPLtools-02-00-00