You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

About this version of CSPad alignment

  • Sensors in quads are aligned individually (see CSPad Alignment of quads) using their natural coordinates as from the optical measurement (top-left corner is an origin, nearest point to the beam spot).
  • Quads are rotated and inserted in uniform 2-D array with appropriate offsets.

Earlier versions of CSPad alignment

CSpad Alignment - v2011-05-25
CSPad Alignment of quads - v2011-06-14
CSPad Alignment of quads

Alignment tool

  • Takes image of CSPad or quad from 2-D array
  • Draw lines along the wire shadows
  • Interactively adjust lines along the wire shadows
  • Plots:
    • image
    • image profile
    • deviation of the shadow "center of gravity" from line along the line

Alignment parameters

Alignment of sensors in quads

See CSPad Alignment of quads for sensor position parameters in quads.

Quad nominal rotation angle (dergee)

 self.quadInDetOrient = [180, 90, 0, 270]

Quad corner X and Y coordinates (in pixel)

    off    = 30
    gapX   =  0
    gapY   =  0
    shiftX = 18
    shiftY = 18

    quadXOffset = [ off+0-gapX+shiftX,  off+  0+1-gapX-shiftX,  off+834+0+gapX-shiftX,  off+834+0+gapX+shiftX]
    quadYOffset = [ off+0-gapY-shiftY,  off+834-3+gapY-shiftY,  off+834-0+gapY+shiftY,  off+  0+2-gapY+shiftY]

Deviation of the wire shadows from lines

Large plots are for tilted ASICs, icons for non-tilted.



- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

- non-tilted ASICs

  • No labels