1. #Known Issues
   1. #Bugs
   2. #To-Do
2. #Documents
3. #Setup
   1. #Environment
   2. #Dependencies
   3. #Test inside Eclipse
4. #Development
   1. #Overview
   2. #Glossary
   3. #Classes and Functions
      1. #User Interface
      2. #Controllers
      3. #Model
      4. #ControlSystem
      5. #Others
5. #Release with Ant

Known Issues

Bugs

• The following PVs don't accept Strings (have wrong types?)
  • RATE_DEF:GLB0:%d:INPUTS
  • RATE_DEF:GLB0:%d:LONG_NAME

To-Do

• Do a Klystron check (see p. 3, point 11 of EVG upgrade requirements.pdf)
• Provide support for the editable flag on the ModifiersPanel
• Save descriptions of HW Input Bits
• Implement the proper release procedure
• If possible, make the initial saving of the EvgConfig faster on development

Documents

• PABIG Interface
• EVG Upgrade Requirements
• UI Mockup

Setup

Environment

• Effectively, you can only develop EVGui inside Eclipse
• Check out the CVS module physics/evgui into your workspace
  • From now on, the root of project is referred to as $EVGUI_ROOT
• If you run Eclipse in the development environment, check out also the following CVS modules:
  • physics/hlaCommon
  • physics/hlaExtension
  • physics/xal4lcls

Dependencies

• hlaCommon (latest version)
• hlaExtensions (latest version)
• xal4lcls (latest version)

Test inside Eclipse

• Select $EVGUI_ROOT/src/edu.stanford.slac.evgui/EvguiLauncher
• Right-click => select Run As... => Java Application

Development

Overview

Glossary

• Modifier: a chunk of Rate Bits (has position, length, and value)
  • the least significant bit is at position (furthest on the right)
• ModifierConfig: encapsulates HW Input Bits, frequency, offset, and position into one structure
• Mods: 4 integers representing the 128 rate bits
  • Mod1: bits 31-0, Mod2: 63-32, Mod3: 95-64, Mod4: 127-96
• Pattern: a list of values for time units 1 through 720, where 360 time units = 1 sec
• Rate Bits: 128 bits (from 127 to 0)
• HW Input Bit: essentially, a binary PV whose value may overrate modifier bits

Classes and Functions

User Interface

• The main user interface consists of 5 tabs: "Define Modifiers", "Define Rate Groups", "Define Input Bits", "Define Beam Rates", and "Define Patterns"
• Each tab has a corresponding XYZPanel class under edu.stanford.slac.evgui.ui
  • Each XYZPanel is a subclass of edu.stanford.slac.mpsgui.util.AbstractPanel
  • (Almost) every widget of the panel is stored in a field in the corresponding XYZPanel class
  • The fields are public to allow registration of the listeners (however, it doesn't make sense to set them)

edu.stanford.slac.mpsgui.ui.BeamRatesPanel

• Allows user to add/remove rates of a particular RateGroup; set a short (used by EVG) and a long rate name, as well as HW Input Bits

edu.stanford.slac.mpsgui.ui.EvguiPanel

• The main panel whose child is a JTabbedPane that contains the 5 tabs

edu.stanford.slac.mpsgui.ui.InputBitNamesSelectionPanel

• Pops up in a dialog when user edits the input bits in JTable cells

edu.stanford.slac.mpsgui.ui.InputBitsPanel

• Allows user to enter names and description for HW Input Bits 0 through 9

edu.stanford.slac.mpsgui.ui.ModifierConfigsPanel

• Allows user to configure modifier bits for a rate (HW Input Bits, frequency, offset, and value)
  • Offset can be 1 or higher (not 0)
  • Display the resulting Pattern in cells to the right
• Added dynamically to the #edu.stanford.slac.mpsgui.ui.PatternsPanel when a rate is selected

edu.stanford.slac.mpsgui.ui.ModifiersPanel

• Allows user to configure Modifiers (name, category, position, length, and whether the value should come from MPG)
  • Eventually, the "editable" flag shall prevent actual changes to Modifiers

edu.stanford.slac.mpsgui.ui.PatternsPanel

• Allows user to select a rate group, specify which time slots to display, select a rate, and create ModifierConfigs

edu.stanford.slac.mpsgui.ui.RateGroupsPanel

• Allows users to add/remove a RateGroup, edit its name, and specify on which time slots it shall be active
• Also features a button for uploading the Rate Groups (and patterns) to EVG

Controllers

• Controllers are located under edu.stanford.slac.evgui.controller; the majority of them are Swing TableModels for JTables on corresponding tabs

edu.stanford.slac.evgui.controller.EvguiController

• Sets up the UI, registers all listeners
• Loads the RatesConfig from the EvgConfig IOC and Modifiers from PNBN IOC
• Delegates to EvgModelIO for actual EPICS gets/puts

edu.stanford.slac.evgui.controller.InputBitNamesCellEditor

• A cell editor for HW Input Bits

Model

edu.stanford.slac.evgui.model.BeamRate, edu.stanford.slac.evgui.model.InputBit, edu.stanford.slac.evgui.model.Modifier, edu.stanford.slac.evgui.model.ModifierConfig, edu.stanford.slac.evgui.model.RateGroup

• Components of the EvgConfig (see also #Overview)

edu.stanford.slac.evgui.model.EvgModel

• Container for all components of the EvgConfig

edu.stanford.slac.evgui.model.EvgModelIO

• Adds a progress layer to gets/puts from EPICS IOCs (see also #ControlSystem)
• Provides necessary information for #edu.stanford.slac.evgui.controller.EvguiController to display a progress dialog

edu.stanford.slac.evgui.model.ModifiersCollection

• A custom collection that implements both getFirst() and get(key)

edu.stanford.slac.evgui.model.PatternsProcessor

• A facade for all bit manipulation methods that are used by EVGui

ControlSystem

• The package edu.stanford.slac.evgui.epics contains 3 classes that implement gets/puts to EPICS IOCs that store the EVG (aka PABIG) data, the EvgConfig, and modifiers (PNBN)

Others

edu.stanford.slac.evgui.util.EvguiUtil

• Contains useful utility methods

Release with Ant

cd $EVGUI_ROOT
ant
java -jar /afs/slac.stanford.edu/g/lcls/vol8/epics/TestStand/evgui/evgui.jar &

• You can change the destination of the jar file (and other parameters) in $EVGUI_ROOT/build.xml

PDUDiag Matlab Script

• Located under $TOOLS/matlab/src/pdudiag.m
  • Configured for production; uncomment line 19 to run on development

    matlab -nosplash -nodesktop -r pdudiag
    

• Select location, crate, and channel; press "Collect Data"