Availability and General Information
...
Five MCC boards have been mounted and tested at SLAC. Three have been sent to CERN for testbeam and two are kept at SLAC.
...
MCC Board ID | MCC CHIP | Location |
|---|---|---|
18019195 | 25/27 | CERN |
18019196 | 25/26 | CERN |
18019197 | 25/20 | CERN |
18019198 | 25/28 | SLAC |
18019199 | 25/25 | SLAC |
...
Some photos of the setup used at SLAC for testing are shown here:
...
Low Voltage Power Scheme:
...
As in the regular setup, the TPCC board has to be powered with +5V and -5V. The MCC board has to be powered with +3.3V. To power the Single Chip Board with Analog=1.6V and Digital=2.0V, there are two options:
...
Test ID | MCC Board ID/MCC CHIP | Sensors | DIGITAL SRAM | THRESHOLD | SOURCE |
|---|---|---|---|---|---|
1 | 25/20 | 1,2,3 | OK | OK | OK |
2 | 25/26 | 1, 3 | OK | OK | OK |
3 | 25/27 | 1,3 | OK | OK | OK |
Test ID 1
Digital test:
Threshold scan
...