...
- Prepare work:
- Record current iocSpecificRelease for sioc-b81-mc03:
- iocSpecificRelease -> /u/cd/tthayer/workspace/LCLSII/SXRU/Undulator_SXR_MMF/
- During the test day:
- Boot current EPICS 3 based IOC, record settings:
- Currently sioc-b81-mc03 is running, need to check again before test
- Open EDM based Undulator GUI
- login lcls-dev3
- cd ../tthayer
- cd LCLSII/SXRU/Undulator_SXR_MMF/util/prod
- ./xxxSXU_TCRM_GUI.sh
- Before any movement, record all the settings.
- Take screenshots from GUI
- check IOC status
- check network connection: moc-b81-mc03
- Follow checkout sheet to process the practice tests
- Print the checkout sheet
- Practice with K value and Gap convert
- According to the checkout sheet, the main motion test should be as follows:
- Move gap from 180mm to 100mm
- Power off controller and turn off ioc
- Power on controller and turn on ioc
- Tests will verify the correct operation of the following motion controls:
- Wiring, switch status, ESTOP functionality.
- Coordinated motion for gap adjustment.
- Encoder read back: available, calibrated.
- Limit, tilt, and vacuum switches: single axis, coordinated motion.
- Take a look on spline
- Stop the test if encounter any issue/hazard, contact Alex for help.
- After all the test, revert all the settings as same as saved before.
{"serverDuration": 53, "requestCorrelationId": "722bd3313285ecb8"}