Page History

...

1. Turn dry-air valve counterclockwise ¼ turn.
   There should be a hissing noise from the air flow.

   Info
   This dry air is used to control EFD and height gauge.

2. Turn EFD on
   The screen will display a default menu. [Add picture.] 
   The settings for SE4445 are preset 001
   
   
   
   Image Added
   
   
3. Turn on glue robot.
   The robot head should be in such-and-such position.
   Image Added
   
   
   

4. The ITkPixel account on the PC has the Janome Points software installed to control the robot. 
   
   

   Info
   The password is AtlasITkBox. For info about the itk-admin account contact Matthias Wittgen

5. Click on the desktop icon JR C-Points to start the program
   
6.  Select the following options to initialize the program :  
   
   
   •  JR2500-N bullet 
   •  z-axis control 
   •  R-axis control (not ticked!)
   •   IO-A (not ticked) 

     See picture for comparison: 
   

   
   

7. Open the point program Neha_2020Feb3_InnerRingx3.cpd



   Info
   We are using #13 for the triplet in a row. Note that the pallet routine is #22 (plane, with auto-increment)

    

   
   
   
8. Initialize the robot with Meca Initialize: 
   
   
   


9. To execute the program hit Send C&T data from the Robot menu. 

   Info
   Make sure that the Robot is set in Teaching mode in the Changing Mode window from the Robot menu.

10. Select Switch Run Mode in the Changing Mode window from the Robot menu.
    
    

11. Select the program #  to execute from the Robot command buttons. It will be displayed on the LED. 

    Image Added
    
    

    Info
    The program # is displayed on the right.

     

     

12. Push the green start button. 

    Info
    At any moment if any issue to terminate push the RED button

    
    
    

13. To repeat : 
    1. switch to Teaching mode in the Changing Mode window from the Robot menu. 
    2. made the proper changes to the program 
    3. restart from #9 
       
       
       

...