Page History
...
This panel contains three selection buttons,
Instrument,Experiment, andDetector,
which help to set associated parameters. Each of these buttons must be sequentially clicked and desired value should be selected from popup list. After experiment name is selected, the default calibration directory appears in the next-right information field. This top-level calibration directory will be used for deployment of all calibration files. Optional button Browser launch directory selection dialog which allows to set different from default destination calibration directory. At first setting the sequence of operations in this panel is guided by the next enabled green button. Already enabled buttons can be re-selected at any time.
| Note |
|---|
Parameters of this panel must be set before any other actions with Calibration Manager. |
which mast be set before any other actions. Button Browser launch optional selection dialog of different destination calibration directory, if default directory is not intended for file saving.
Log-book panel
Log-book panel is located in the bottom of the main window. It is intended as a global information panel in order to minimize a number of specific information fields. Records from most important manipulations and messages at variation of status or information buttons are posted in this panel. At the end of each session content of this panel is saved in the log-file in the work directory.
...
Application panel under ROI (Region Of Interest) tab has a minimal number of control fields, which allow to specify the file with image and open/close Mask Editor UI in separate window. Then the Mask Editor works as completely independent application. The Mask Editor allows to draw on image any number of a few geometry figure types and finally generate and save positive or negative mask for loaded image.
...
Overview
Content Tools