XIP Pulse Selector: Files, modes, schematics
Setup Lab: EVR Settings
Setup Lab: Working with the EVR from pslogin
- in pslogin type (you need to have your securekeys):
Code Block |
---|
ssh ioc-tst-cam5 /reg/neh/home1/paiser/bin/evr.sh EVR=TST:CAM:05:EVR
|
- Then configure EVR as you need manually...
Setup Lab: In case the server ioc-tst-cam5 was power cycled
- Connect to the server:
Code Block |
---|
ssh ioc-tst-cam5
|
- Run the startup command that contains EVR ioc in:
Code Block |
---|
sudo /reg/d/iocCommon/sioc/ioc-tst-cam5/startup.cmd
|
- You should see with psproc:
Code Block |
---|
[paiser@ioc-xrt-xcscam04 ~ 12:18:20] psproc
PID USER-ID SIOC COMMAND HOSTNAME PORT
4851 tstioc caRepeater procServ ioc-xrt-xcscam04 30000
5147 tstioc ioc-tst-cam5 procServ ioc-xrt-xcscam04 30001
5150 tstioc ioc-tst-cam5 procServ ioc-xrt-xcscam04 40000
|
Setup Lab : In case you need to power cycle ioc-tst-cam5
Code Block |
---|
ipmitool -I lanplus -U ADMIN -P <you_should_know> -H ioc-tst-cam5-ipmi power status
ipmitool -I lanplus -U ADMIN -P <you_should_know> -H ioc-tst-cam5-ipmi power reset
|
Where: <you_should_know> is the standard ipmi password that you_should_know...
Setup Lab : Test Screens
Python homing script:
/reg/neh/home1/jsludvik/test-python/xip-home.py
...