Page History

XIP Pulse Selector: Files, modes, schematics

EVR Settings

Working with the EVR from pslogin

1. in pslogin type (you need to have your securekeys):

   Code Block
   ssh ioc-tst-cam5 /reg/neh/home1/paiser/bin/evr.sh EVR=TST:CAM:05:EVR

2. Then configure EVR as you need manually...

In case the server ioc-tst-cam5 was power cycled

...

1. Connect to the server:

   Code Block
   ssh ioc-tst-cam5

2. Run the startup command that contains EVR ioc in:

   Code Block
   sudo /reg/d/iocCommon/sioc/ioc-tst-cam5/startup.cmd

3. You should see with psproc:

   Code Block
   [paiser@ioc-xrt-xcscam04 ~ 12:18:20] psproc PID USER-ID SIOC COMMAND HOSTNAME PORT 4851 tstioc caRepeater procServ ioc-xrt-xcscam04 30000 5147 tstioc ioc-tst-cam5 procServ ioc-xrt-xcscam04 30001 5150 tstioc ioc-tst-cam5 procServ ioc-xrt-xcscam04 40000

EVR startup script from pslogin:

Note: you need to have your securekeys.

...

...

ssh ioc-tst-cam5 evr.sh EVR=TST:CAM:05:EVR

In case you need to power cycle ioc-tst-cam5

...

Code Block
ipmitool -I lanplus -U ADMIN -P <you_should_know> -H ioc-tst-cam5-ipmi power status ipmitool -I lanplus -U ADMIN -P <you_should_know> -H ioc-tst-cam5-ipmi power reset

...

X-Y interlock stopped working today, need to investigate.

1/ login in ioc-tst-cam5:

2/ cd /reg/neh/home1/paiser/bin

3/ evr.sh EVR=TST:CAM:05:EVR

then configure EVR...If the evr is not connected, then:

4/ sudo /reg/d/iocCommon/hosts/ioc-xrt-xcscam04/startup.cmd