...
This section documents the set-up and the operation of the XY stages (one for the ring and the other for the stave) in the QC test box.
Contacts:
- Valentina Cairo (cairo@slac.stanford.edu)
- Sanha Cheong
...
- (sanha@slac.stanford.edu)
- Sam Krishnamurthy (skrishnamurt@umass.edu)
- Scott Newbry (newbry@slac
...
...
- Zhi Zheng (
...
Set-up
Overview
Individual Components
...
The current convention is that the home position of each stage is calibrated as (0, 0) position. If you home-positioned the stage, but the coordinate shown is not (0, 0), re-calibration is required.
Ring Stage
Shows up as `usb0` `FTDI USB to Serial /dev/ttyUSB0` on the `OpenBuilds CONTROL` software
...