The ILC Detector Simulation FAQ

General

...

Why are

...

detector simulations needed?

• ACFA
• ALCPG
• ECFA

Where can I get additional information about software packages?

The LCSim Software Index has links to all the primary tools for ILC Detector Simulations. The Portals Section lists sites that cover full suites of software.

What conference or meeting webpages have ILC detector simulation documents (PPT, PDF)?

lcws
alcpg workshops
efca workshops
acfa workshops
NICADD agenda server
CALICE agenda server

List of ILC Groups, Conferences, and other Resources

TODO: Update the resources list

Feedback

Is there an forum for ILC detector simulation issues?

The linearcollider.org forum is an appropriate place to post your questions on detector simulations and reconstruction and analysis.

Is there a regular meeting that covers ILC detector simulation software?

The weekly LCD software meeting for discussing all aspects of detector simulations and analysis and reconstruction. This meeting takes place every Tuesday at 1:30 PST, unless cancelled.

Is there a mailing list for questions or announcements about ILC detector simulation?

lcd-l (main one?)
lcd-dev (lcsim)
lcd-sim (active?)
TODO: Which of these are active and should be used? --JM

calice-sw (active and useful for tbeam people)

others?

Detector Concepts

What are the proposed detector concepts?

There are now four proposed detector designs for the ILC which each having an outline document. These are the Silicon Detector (SiD), Large Detector Concept (LDC), GLD, and the "Fourth Concept".

• SiD (American origin)
  • Silicon tracker, 5T field
  • SiW ECAL
  • 4 'coordinators' (2 Americans, 1 Asian, 1 European)
• LDC (European origin)
  • TPC (+Silicon IT), 4T field
  • SiW ECAL ("medium" radius)
  • 6 'contact persons': (2 Americans, 2 Asians, 2 Europeans)
• GLD (Asian origin)
  • TPC (+Large Silicon IT), 3T field
  • W/Scintillator ECAL ("large" radius)
  • 6 'contact persons': (2 Americans, 2 Asians, 2 Europeans)

• above from slide of Hitoshi Yamamoto

What is the SiD?

From the SiD homepage, "The Silicon Detector Design Study is being organized to develop the SiD Detector Concept into a detailed, optimized, and fully integrated detector design on a roughly one year time scale. The SiD concept incorporates Si/W calorimetry and Si tracking in a Linear Collider detector design which attempts to optimize physics performance while realistically constraining costs."

SiD Detector Outline Document

What is the GLD?

GLD Detector Outline Document

GLD Detector Outline Document Kickoff

What is the LDC?

LDC Detector Outline Document

What is the fourth concept?

Fourth Concept Outline Document

R&D

What institutions are involved with ILC detector research?

• ANL
• CALICE
• DESY
• FNAL
• Iowa State
• LBL
• KEK
• IN2P3
• ITEP
• NICADD
• SLAC
• University of Colorado at Boulder
• University of Oregon

And many others I probably missed.

Where can I go for more information about ILC detector R&D programs?

LCRD UCLC FY06
ILC Detector R&D - mostly archival materials

Calorimetry

What technologies are being considered for the HCAL?

RPC - Stainless Steel (SS)
GEM - SS
scintillator - SS
DREAM
hybrid

What technologies are being considered for the ECAL?

Si - W
Si - Pb
scintillator - W, Pb
lead tungstate crystals
hybrid

What technologies are being considered for the MUON subsystem or tailcatcher?

What are the plans for testbeams?

Where can I go for more information about testbeams?

Tracking

What technologies are being considered for the tracking system?

Silicon
TPC

Vertexing

What technologies are being considered for the vertexing system?

Far Forward Calorimetry

Machine Detector Interface and Beam Delivery System (MDI-BDS)

Software Frameworks

Isn't there one main software framework for ILC detector simulation that I can use?

There are three (and soon-to-be four) separate software frameworks corresponding to each of the major detector concepts.

TODO: What kind of common software packages can we establish and use effectively among all 4 groups? --JM

What tools are available for ILC Detector Simulations?

Many tools are available for the simulation of ILC detectors and the analysis of results. There are three differents toolchains that can be used, corresponding to the LDC, SiD, and GLD detectors. The software suites corresponding to the first two detectors can simulate all 3 detector concepts, so there is no strict division on which tools should be used for a certain detector study.

What are the software frameworks that correspond to each design?

Which software tools are associated with SiD?

The ALCPG and SLAC use the SLIC Simulations Package (C++) with the org.lcsim for reconstruction and analysis using Java. This system also uses the JAS3 graphical analysis environment. Much of the functionality within org.lcsim comes from the FreeHep Java Library.

slic
lcdd
gdml
GeomConverter
org.lcsim
SlicDiagnostics
Maven
Netbeans
JAS3
WIRED
AIDA

Which software tools are associated with GLD?

Finally, the ACFA group has a suite of softare based on the ROOT framework.

Jupiter and satellites
Root

Which software tools are associated with LDC?

There is a C++ framework developed under ECFA that uses Mokka for the simulator with the MARLIN tool for analysis and reconstruction.

ILC Software Meeting at Cambridge - focuses on LDC framework (Mokka, Marlin)

Bug Reports

How do I file a bug report or make a feature request related to ILC software?

The SLAC Jira Bugtracker allows users to submit bug reports or make feature requests.

The projects relavent to ILC are ...

• SLIC
• LCDD
• GeomConverter
• LCDetectors
• LCIO
• LCSIM
• www-lcsim

Each package will be covered in more detail within this FAQ.

How do I file a bug report or make feature request for auxiliary ILC software?

Several packages are used by org.lcsim that are not specific to ILC simulations. There is a separate FreeHep bugtracker for these projects. These Jira projects include ...

• JAS3
• AIDA
• WIRED

How do I get an account on the ILC or FreeHep Jira?

Contact Tony Johnson <tony_johnson@slac.stanford.edu> to obtain an account on either of these systems.

Software Repositories

How can I checkout projects anonymously from the SLAC CVS?

You can checkout projects with this command.

cvs -d :pserver:anonymous@cvs.freehep.org:/cvs/lcd co [module]

The module is the name of the package to checkout of CVS.

What modules are available from the SLAC CVS?

These are the main modules.

How do I get an account at the SLAC CVS?

Contact Tony Johnson <tony_johnson@slac.stanford.edu> to request a SLAC CVS account.

Where can I go for more information about the SLAC CVS?

SLAC CVS page

Can I browse the SLAC CVS on the WWW?

jcvs

What are some other CVS or SVN repositories I should know about?

CALICE
Marlin
MarlinReco
GDML
DESY

What are the recommended CVS tools for Windows users?

Windows users should look at Tortoise CVS which adds extensions to Explorer for easily checking out and managing CVS projects.

SLIC

What is SLIC?

SLIC stands for "Simulator for the Linear Collider". It is a full simulation package that uses the Geant4 Monte Carlo toolkit to simulate the passage of particles through the detector. SLIC outputs LCIO files that can be analysed using a variety of frameworks and language bindings. SLIC uses a separate backend for the input of detector data called Linear Collider Detector Description (LCDD), which itself is based on the GDML project from CERN.

Where is SLIC's homepage?

The SLIC Confluence page is the best source for up-to-date information on this software package.

Who is the primary maintainer of SLIC?

Jeremy McCormick <jeremym@slac.stanford.edu> is the primary author and maintainer of SLIC. The handling of MCParticles in SLIC was based on earlier work by Ron Cassell <cassell@slac.stanford.edu> from a package called Linear Collider Simulator (LCS). Much work has also been done by Ron to verify and debug the LCIO output files.

Where should I go for news or announcements about SLIC?

At which HEP sites and labs is SLIC installed?

Fermilab: Here are instructions for Fermilab users on getting started with SLIC.

SLAC: Here are instructions for SLAC users on running slic from the public Unix machines at the lab. SLIC can be used on any of the load-balanced interactive Linux clusters, including noric, iris, and yakut.

NICADD: A copy of SLIC is available on the NICADD Linux clusters at /k2data/APPS/SimDist.

Installing SLIC

Which operating systems and compilers does SLIC support?

These are known working configurations of platform and compiler.

The only supported compiler is g++. Other versions may work, but these are the ones that are known to build successfully.

How do I get simulation binaries for my platform?

SimDist downloads contain binaries for Linux, OSX, and Windows.

These are located at ...

http://www.lcsim.org/dist/slic/

To download a Linux release, use these commands.

wget http://www.lcsim.org/dist/slic/slic-1_13_3-Linux-g%2B%2B-bin.tar.gz
tar -zxvf slic-1_13_3-Linux-g++-bin.tar.gz

What is SimDist?

The SimDist package bundles together all the dependencies of SLIC into one project. This greatly simplifies the build process.

How can I compile simulation binaries for my platform?

Follow the build instructions for the SimDist project to make binaries for your platform.

How do I build SLIC and the packages it depends on from scratch?

Building SLIC and its dependencies "from scratch" is not encouraged now that the SimDist project can manage this build procedure.

There are separate instructions for building on Linux and building on Windws if you must do this.

Running SLIC

How do I run if I installed with SimDist?

SimDist has a run script at scripts/slic.sh which will setup the LD_LIBRARY_PATH to contain the Xerces lib directory and execute the current slic binary from the packages/slic/$SLIC_VERSION directory.

It is useable from anywhere on the host where it was installed.

/path/to/my/SimDist/scripts/slic.sh [options]

This script passes all arguments to slic, so use it as you would the normal binary.

How do I run the simulator binary from the slic home directory?

Assuming you are within the slic package's top directory you would run it with this command.

./bin/$G4SYSTEM/slic [options]

The G4SYSTEM variable depends on your platform. For instance, on Linux, it is set to Linux-g++, so the command would be ...

./bin/Linux-g++/slic [options]

Does SLIC have any runtime dependencies?

If you installed SLIC in the recommended way, the only runtime dependency would be the Xerces C++ shared library. The Xerces library directory needs to be added to the LD_LIBRARY_PATH (bash), so that the loader can find this library when slic executes.

export LD_LIBRARY_PATH=/path/to/my/xerces/install/lib:$LD_LIBRARY_PATH

If you see this error, it means that the LD_LIBRARY_PATH has not been set correctly.

./slic/bin/Linux-g++/slic: error while loading shared libraries: libxerces-c.so.27: cannot open shared object file: No such file or directory

The SimDist run script will set this variable automatically.

How do I get help on the command-line syntax?

To see explanations of slic's command-line options, use the "-h" option.

slic -h

This will print slic usage and exit.

What command-line options does SLIC support?

Typing slic -h will print the available command-line options.

************************
* Command Line Options *
************************

Option  Full Name       Min Args  Max Args  Macro Command           Description
---------------------------------------------------------------------------------------------------------------------------
-h      --help          0         0         /slic/usage             Print SLIC usage.
-n      --interactive   0         0         /control/interactive    Start a Geant4 interactive session.
-v      --version       0         0         /slic/version           Print SLIC version.
-m      --macro         1         1         /control/execute        Execute Geant4 commands from a file.
-g      --lcdd-url      1         1         /lcdd/url               Set LCDD geometry file URL.
-i      --event-file    1         1         /generator/filename     Set event input file full path.
-o      --lcio-file     1         1         /lcio/filename          Set name of LCIO output file.
-p      --lcio-path     1         1         /lcio/path              Set directory for LCIO output.
-O      --autoname      0         1         /lcio/autoname          Automatically name the LCIO output file.
-x      --lcio-delete   0         0         /lcio/fileExists delete Delete an existing LCIO file.
-r      --run-events    1         1         /run/beamOn             Run # of events.
-s      --skip-events   1         1         /generator/skipEvents   Set number of events to skip.
-l      --physics-list  1         1         /physics/select         Set Geant4 physics list.
-L      --log-file      0         0         /log/filename           Set logfile name.
-d      --seed          0         1         /random/seed            Set the random seed.  (No argument seeds with time.)

Each option is mapped in a straightforward way to a corresponding Geant4 UI command, so the same exact commands can be executed either from the command prompt or in the Geant4 interactive terminal.

How do I find out about the SLIC version I am running?

The command

slic -v

prints the SLIC version, along with a lot of other information (probably too much).

Simulator for the Linear Collider; SLIC; v1r13p6; Jeremy McCormick and Ron Cassell; SLAC; Tue Apr  4 17:32:07 PDT 2006

The /slic/version command will do the same from a macro or UI terminal.

How do I get detailed information about the SLIC version I am running?

SLIC prints a splash screen as it starts up with the version, build date, and other information.

*************************************************************
 App     : Simulator for the Linear Collider (SLIC)
 Version : v1r13p6
 Date    : Tue Apr  4 17:32:07 PDT 2006
 Authors : Jeremy McCormick and Ron Cassell
 Inst    : SLAC
 WWW     : http://www.lcsim.org/software/slic
 Contact : jeremym@slac.stanford.edu
*************************************************************

How do I find out the version of Geant4 that SLIC was built with?

The Geant4 toolkit prints a splash screen that SLIC displays when it starts up.

*************************************************************
 Geant4 version Name: geant4-08-00-patch-01    (10-February-2006)
                      Copyright : Geant4 Collaboration
                      Reference : NIM A 506 (2003), 250-303
                            WWW : http://cern.ch/geant4
*************************************************************

The Geant4 version in the figure above is 8.0.p01.

How do I get help on SLIC's custom Geant4 commands?

SLIC commands are added into various directories within the Geant4 UI hierarchy. From interactive mode, use this command to print information on a SLIC or LCDD command.

help [command]

Those directories containing only SLIC or LCDD commands are marked with SLIC or LCDD.

/lcio/   LCIO output commands. [SLIC]

Type

help [dir]

or

help [command]

for information about the user interface directory or command. Of course, this requires that the programmer actually put in some useful help string. Most commands and directories have such information.

How do I run a macro containing UI commands?

You can put Geant4 UI commands into one or more macro files that slic can execute. This is done with the "-m" switch. There can be any number of these switches given to slic at the commandline. For instance, this command will execute the two macros init.mac and run.mac.

slic -m init.mac -m run.mac

The macros are executed in the order given at the command-line.

If macros are interspersed throughout the command switches, then SLIC will also execute each command in order.

slic -m init.mac -x -o output -p myDir -m run.mac

First init.mac will be executed. Then the three commands corresonding to the "-xop" switches and finally run.mac presumably executes the /run/beamOn command.

How do I run in interactive mode?

SLIC can be started in interactive mode using the -n option or the /control/interactive UI command.

This command will start Geant4 in PreInit mode where the geometry is not loaded.

slic -n

Other commands may also be executed before the interactive mode starts.

slic -g myGeom.lcdd -n

The LCDD file will be constructed, so the simulator will start in Idle mode.

What is a typical command to run SLIC in batch mode?

The following command illustrates some of the options that could be used in a typical batch run.

slic -g myGeom.lcdd \              # geometry file
     -i events.stdhep \            # StdHep input file
     -p lcio/ \                    # path for LCIO output file
     -o output.slcio \             # name of LCIO output file
     -x \                          # delete existing LCIO file
     -r 1234 \                     # seed the random engine
     -s 100 \                      # number of events to skip
     -r 1000                       # number of events to run

How can I check on the progress of my SLIC job(s)?

In bash, direct all output to a file, as follows.

slic &> job.log &

Now use the tail command to look at the output file as the job progresses.

tail -f job.log

The BeginEvent and EndEvent markers are the best indicators of the job's progress.

Most batch systems will provide logging services, and the tail command can be used on these files, too.

How do I run SLIC on the LSF batch system?

The bsub command is used to run SLIC on LSF.

This is an example of submitting a job to run 1000 events through the sid00 detector on the xlong batch queue.

bsub -q xlong -o `pwd`/job.log -e `pwd`/err.log time slic -g sid00.lcdd -i events.stdhep -o events_sid00 -r 1000

LSF accepts plain bash scripts to start jobs. Mine usually use a few for loops to run combinations of geometries with StdHep files.

for g in $(ls *.lcdd); do
  for s in $(ls stdhep/*.stdhep); do
    fname=$(basename ${s%.*})_$(basename ${g%.*})
    bsub -o `pwd`/$fname.log -e `pwd`/$fname.err -q xlong time slic -g $g -i $i -o $fname
  done
done 

The stdhep directory should contain a symlink to the StdHep files used for input events.

Example LSF submission scripts can be found in Jeremy McCormick's jobs directory on the SLAC Linux machines at ~jeremym/work/jobs.

How do I run SLIC on the Condor batch system?

TODO: An old version works on Condor but probably not SimDist. I will get this running at NICADD.

Can I run SLIC on the Grid?

No. But I am working on it.

Why not?

Because getting things to run on the Grid is hard.

How can I make SLIC look for XML schemas in a local directory?

The current directory is always searched for the XSD files, first.

The GDML_SCHEMA_DIR environment variable may point to a single directory where all XSD files should be located. LCDD uses GDML for entity resolution, also, so the LCDD schemas can be placed in this directory, also.

How do I install the XML schemas to a local directory?

From the lcdd directory, execute make schema_install to copy all the GDML and LCDD schemas in the schemas directory to another existing directory.

How can I automatically set the name of the LCIO file?

The -O switch turns on SLIC's auto-naming feature, which will give the output file a reasonable name based on the event generator used and the name (or tag) of the geometry. The /lcio/autoname command is the corresponding UI command.

How can I customize SLIC's autonaming feature?

The autoname feature can be customized by providing arguments to the /lcio/autoname command. These specify fields that should be inserted in the automatically generated filename.

Here is a summary of these options.

The following command illustrates the autoname feature.

/lcio/autoname event application version geometry

It would result in an automatically-generated name similar to neutrons_SLIC_v1r13p6_myGeometry.

How can I automatically delete an existing LCIO file?

The -x option or /lcio/fileExists delete option will cause an existing LCIO file to be overwritten.

How do I skip events in a StdHep file?

The -s option or /generator/skipEvents command take the number of events to skip as an argument. This is only applicable to file-based event sources such as StdHep or LCIO files.

How do I set the random seed?

The -r option or the /random/seed command controls the CLHEP random seed setting. Without an argument, the current time is used as a seed. Otherwise, an integer argument is used as the seed.

How do I dump the state of the CLHEP random engine?

Dumping random state is a built-in feature of Geant4.

Turn on the save feature.

/random/setSavingFlag true

This will cause the random state for each event to be saved to currentEvent.rndm.

To save the current event to a unique file, use this command.

/random/saveThisEvent

This copies currentEvent.rndm to runXXXevtYYY.rndm.

To do this for every event, put the saveThisEvent command in a macro called rndmSave.mac and run events in this fashion.

/run/beamOn 1000 rndmSave.mac

This will cause the random state to be dumped for every event.

How can I set the directory for the random dumps?

The /random/setDirectoryName command sets the base directory where the rndm files will be placed.

How do I load back the state of the random engine that I dumped previously?

To restore the random state, use this Geant4 UI command.

/random/resetEngineFrom currentEvent.rndm

This can be used to "replay" events of interest. This feature will probably be used with SLIC's skipEvents feature in order to jump to the event first before restoring its random state.

/random/resetEngineFrom run0event1000.rndm
/generator/skipEvents 1000

How can I see which physics lists are available?

Execute the command /physics/printLists to see the available Geant4 physics lists.

How do I set the physics list?

The -l option or /physics/select command takes the name of the physics list to use as an argument.

/physics/select LHEP

This must happen in the PreInit stage. Once the simulator is in Idle state, the physics list is set permanently for that run, and SLIC must be restarted to use a different list.

How can I customize Geant4's stepping in the magnetic field?

A number of options are available for tweaking the handling of transportation through the magnetic field in the /field command directory.

The command selectStepper sets the integrator, where the argument can be one of the following.

G4ClassicalRK4
G4ExplicitEuler
G4HelixExplicitEuler
G4HelixHeum
G4HelixImplicitEuler
G4HelixSimpleRunge
G4ImplicitEuler
G4CashKarpRKF45
G4SimpleHeum
G4SimpleRunge

The command setDeltaOneStep sets the maximum stepsize that will be taken in the field.

The command setDeltaIntersection sets the maximum distance from the chord line.

Refer to the Electromagnetic Fields Chapter of the Geant4 Application Guide for more details on these settings.

How do I set the maximum number of events?

The -r switch sets the number of events to run, and it corresponds to Geant4's built-in /run/beamOn command.

What event generators are available from within SLIC?

SLIC can read StdHep files using Willy Langeveld's lightweight XDR interface from Lelaps.

An MCParticles collection of an LCIO file can also be used as a source of events, which is useful for repeating events run in other simulation frameworks.

How do I use a StdHep file?

To select a StdHep file with physics events, use the -i switch or /generator/filename command followed by an absolute or relative path to the file. Any file with an extension of .stdhep or .xdr will be automatically interpretted as a StdHep file.

How do I use an LCIO file as an event source?

SLIC also accepts LCIO files as event sources. Use the commands as if the file were a StdHep source, and the LCIO generator will be automatically selected if the file has the extension of .slcio.

How do I use the General Particle Source (GPS)?

Geant4 includes a flexible and powerful particle generator called the General Particle Source or GPS.

Execute this command to select GPS as the event source.

/generator/select gps

Actually, GPS is the default, but this can be used to switch if another generator is being used (e.g. in interactive mode).

Refer to the GPS User's Guide for detailed instructions on using this tool.

There are also a few sample GPS macros in the slic CVS project at macros/gps*.mac_.

How do I use the particle gun?

Geant4 includes a simple particle gun that can be selected with this command.

/generator/select gun

However, GPS is the recommended single particle source, and the G4ParticleGun should be considered deprecated, in my opinion.

How can I print information about the current event generator?

Use the command /generator/dumpEvent to display information about the current generator and its event.

What GUIs are available for SLIC?

There are only a limited number of

SLIC Runner is a Java program that uses Swing.

TODO: Fix SLIC Runner to work with latest SLIC.

The built-in GUIs of Geant4 are available, including the XM interface.

If I have a problem with SLIC or find a bug, what information should I include in my report?

Geometry using GDML and LCDD

Why would you use XML for describing detector geometry?

• naturally hierarchical
• platform independent
• human edittable
• extendable
• described by a standardized and powerful schema language (XML Schema or XSD)
• generated or transformed easily from nearly any programming language (C++, Java, Python, etc.)
• enjoys broad support and acceptance
• overall a good fit for describing detector data

What is GDML?

GDML stands for Geometry Description Markup language. It is an XML format for the description of CSG geometries with a primary binding to the Geant4 toolkit. There is also a Python binding with Root. GDML allows geometry data to be interchanged between difference programs, such as simulators, analysis and reconstruction software, and visualization tools.

What features does GDML support?

GDML defines a document structure and a list of legal elements.

• defines
  • constants, reflections, positions, rotations
• materials
  • material, isotope, element, mixture
• solids
  • box, sphere, tube, cone, polycone, parallepiped, trapezoid, torus, polyhedra, hyperbolic tube, elliptical tube, ellipsoid
    boolean solids
• volumes
  • assembly volumes and reflections
  • replicas and divisions
  • parameterised volumes (position, rotation and size)

Where can I go for more information on GDML?

The current, primary maintainer of GDML, Witold Pokorski, made a good overview presentation of GDML for the CHEP 2006 conference.

Browse the GDML CVS online or use the LXR browser.

A supplementary page is maintained by Jeremy McCormick at http://www.lcsim.org/software/gdml.

What is LCDD?

LCDD is the Linear Collider Detector Description markup language, and is itself based on the GDML toolkit.

Why should I use LCDD?

The LCDD geometry backend is designed for prototyping, debugging, and experimenting with different detector geometries, material definitions, readouts, and physics settings. There are many options to explore in the Geant4 toolkit, so having this type of "Swiss Army Knife" tool saves a lot of (programming) time.

LCDD provides a 100% runtime description of the detector and its associated properties, including the detailed volume hierarchy, assignment and properties of sensitive detectors, and the specification of detector component identifiers, among many other features. In practice, writing files in this standardized format is much easier than trying to author custom C++ code for each proposed full detector design and their subdetectors.

What features does LCDD support?

• volumes
  • logical volumes
    • assignment of sensitive detector, visualization attributes, region, physics lists
  • physical volumes
    • volumes identifiers
• sensitive detectors
  • tracker
  • calorimeter
    • readout binning and segmentation
• magnetic field
  • simple solenoid
  • RZB map
• visualization attributes
• region
• physics limits
• identifiers
  • 32 and 64 bit ids
  • identifier dictionary

Where can I go for more information on LCDD?

LCDD Homepage

Where can I find examples of LCDD?

The directory examples in the slic CVS project contains a number of hand-coded LCDD example files.

What is the best way to create LCDD files?

Use the compact description.

Or hand-code them.

How do I dump the current Geant4 geometry to GDML using SLIC?

/lcdd/dumpGDML mygeom.gdml

How do I read an LCDD file using SLIC?

LCDD can read files either from the local file system or from a URL. The file location can be set with the -g option and its corresponding command /lcdd/url.

This is an example of reading a local file from the command line.

slic -g /path/to/myGeom.lcdd

This command reads the geometry from a URL.

slic -g http://www.lcsim.org/detectors/sid00/sid00.lcdd

If the -g option is specified from the command-line, SLIC assumes that the simulator should be initialized to the Idle state after the geometry is loaded.

How do I read a GDML file using SLIC?

The LCDD system supports reading both plain GDML and LCDD files from SLIC.

To read in a "plain" GDML file, simply use the "-g" option as you normally would ...

slic -g myGeom.gdml

The LCDD system will use the GDML schema instead of LCDD and the geometry should be loaded successfully.

How do I check my Geant4 geometry for overlaps?

/geometry/test/recursive_test

Detector and Event Visualization

How can I use Geant4 to visualize the detector?

The Geant4 OpenGL visualization driver can be used to immediately visualize the detector and events. The following command can be used to visualize the detector geometry plus hits and trajectories from the event.

/vis/scene/create
/vis/scene/add/volume
/vis/scene/add/hits
/vis/scene/add/trajectories
/vis/open OGLSX

There is a similar macro in the slic directory at macros/vis_gl.mac.

How can I make a HepRep file using Geant4?

A command similar to this will write out a HepRep zip file to the current directory.

/vis/scene/create 
/vis/open HepRepXML
/vis/viewer/set/culling global false
/vis/scene/add/volume 
/vis/scene/add/trajectories
/vis/scene/add/hits

How do I use DAWN from within Geant4?

/vis/open DAWNFILE

How can I make cuts using DAWN?

dawncut

What other visualization systems are available in Geant4?

VRML
OpenInventor (Coin3D)
RayTracerX
RayTracer

What external visualization options are available?

GDML -> python -> ROOT
WIRED

What is WIRED?

WIRED Homepage

How do I use WIRED?

WIRED tutorial

LCIO

What is LCIO?

LCIO stands for Linear Collider IO. It is the standard data format for exchanging event data between different ILC software, including simulators and reconstruction and analysis tools.

What languages does LCIO support?

• Java
• C++
• Python
• FORTRAN

What simulation tools support LCIO?

Nearly all of the simulation tools support LCIO, including the following tools.

• SLIC
• Mokka
• JUPITER
• BRAHMS

SLIC is unique in that it can read LCIO files as a physics event source.

What reconstruction and analysis tools support LCIO?

The MARLIN tool and its associated MarlinReco processors all support the LCIO format.

The org.lcsim Java framework includes its own implementation of LCIO in the package org.lcsim.util.lcio. This is compatible with the Java implementation included in the LCIO CVS project.

If I don't want to generate files myself, are there LCIO files available that I can use to get started with my analysis?

A SLAC ftp site has LCIO files available, mostly generated using SLIC. Follow the ftp instructions to find and download the files that you want to use.

How do I request new LCIO files?

Contact Norman Graf <ngraf@slac.stanford.edu> if you want some LCIO files generated by SLIC that are not available from the ftp site.

What tool can I use to look at LCIO output from the command line?

LCIO comes with the dumpevent tool that dumps an LCIO file's contents from the command-line. Typically, this would be used with a pager.

$LCIO/bin/dumpevent outfile.slcio 0 1 | less

The above command dumps the direct event of outfile.slcio file starting at run number 0.

What tool can I use to look at LCIO output from within JAS3?

The LCSim Event Browser can be used to look at LCIO files from within JAS3 using org.lcsim.

The LCSim Event Browser instructions show how to use this tool.

How can I create detailed diagnostic histograms of LCIO event data?

The SlicDiagnostics package creates AIDA files with detailed plots of LCIO event data, focused on the simulation classes: CalorimeterHit, TrackerHit, and MCParticle. Contact Jeremy McCormick <jeremym@slac.stanford.edu> if you would like more information about obtaining and using this package.

Where can I post my questions about LCIO?

LCIO forum

Where can I go for more information about LCIO?

LCIO homepage

Compact Detector Description

What is the Compact Detector Description?

The compact description provides an abbreviated format for describing a full detector and its subcomponents to the org.lcsim reconstruction and analysis subsystem.

The compact detector description schema specifies the structure of this format as an XML schema (XSD file).

How does the compact format work?

The package org.lcsim.geometry.compact transforms XML from the compact description into various targets. These include the LCDD language for the simulator and Java runtime objects for reconstruction and analysis.

Where is the standard location for compact XML files and their matching LCDD description?

Compact detectors are kept at this base url in zip files named with the detector tag.

http://www.lcsim.org/detectors

For instance, this is the location of the sid00 detector's resource file.

http://www.lcsim.org/detectors/sid00.zip

The org.lcsim conditions system will use this URL automatically. Otherwise, a tool like wget can be used to download it manually.

Where is the list of available compact descriptions?

A list of available compact detectors is kept at this URL.

http://www.lcsim.org/detectors/taglist.txt 

This is list is updated periodically depending on the current detectors in LCDetectors.

How do I make org.lcsim find a full detector that is not in the standard area at lcsim.org?

Add an alias to ~/.lcsim/alias.properties which points to your detector's resources.

A zip file.

mydet: file:///path/to/mydet.zip

Or the directory.

mydet: file:///path/to/mydet/

What is LCDetectors and how do I use it?

LCDetectors contains detectors in the compact description for use with org.lcsim.

Where can I find documentation on the detectors in LCDetectors?

Detectors Wiki

How do I convert compact detectors into LCDD using GeomConverter?

GeomConverter/bin/GeomConverter -o lcdd compact.xml mydet.lcdd

How do I define constants?

What "magic" constants are expected by the compact reader?

<define>

  <!-- centimeters -->
  <constant name="cm" value="10"/>

  <!-- world -->
  <constant name="world_side" value="30000" />
  <constant name="world_x" value="world_side" />
  <constant name="world_y" value="world_side" />
  <constant name="world_z" value="world_side" />

  <!-- tracking region -->
  <constant name="tracking_region_radius" value="175.*cm"/>
  <constant name="tracking_region_zmax" value="282.*cm"/>

</define>

How do I create my own compact detector?

Defining a Detector

How do I define a cylindrical calorimeter?

Cylindrical calorimeter barrel.

ILC Detector simulations are needed to

• optimize full detector designs for physics performance on benchmark processes
• optimize the designs of subsystems and subdetectors
• compare proposed detector technologies with each other (in concert with test beam)
  • calorimeter examples - RPC, GEM, scintillator, Silicon, lead tungstate, hybrid
• compare different full detector designs
• compare Monte Carlo results with test beam for Geant4 physics list validation
• compare, test, and debug reconstruction and analysis algorithms and other software
• understand the role of dead materials in affecting the overall detector performance
• model the effects of hardware inefficiencies such as cross-talk, dead cells, etc.
• understand the effects of backgrounds on detector performance
• establish a software infrastructure for the actual detector experiment(s)

What groups are involved with ILC detector simulations?

• ACFA
• ALCPG
• CALICE
• ECFA
• Linear Collider R&D Working Group (LCRD)
• NICADD
• University Consortium for Linear Collider R&D (UCLC)

Which labs are the primary ones involved with ILC detector simulations?

• SLAC
• DESY
• KEK
• FNAL
• IN2P3

What (US) schools and universities are involved with ILC detector simulations?

• University of Colorado at Boulder
• University of Kansas
• University of Oregon
• Cambridge
• Iowa State
• Northern Illinois University

Where can I get additional information about software packages?

The LCSim Software Index has links to all the primary tools for ILC Detector Simulations. The Portals Section lists sites that cover full suites of software.

What conference cover ILC detector simulations?

LCWS
ALCPG Workshops
ECFA workshops
ACFA Workshops

Where can I find documents about ILC detector simulations aside from workshop talks?

ILC Wiki
NICADD agenda server
ILC Agenda
LCNotes

Is there a more complete list of ILC groups/links?

List of ILC Groups, Conferences, and other Resources

Feedback

Is there an forum for ILC detector simulation issues?

The linearcollider.org forum is an appropriate place to post your questions on detector simulations and reconstruction and analysis.

Is there a regular meeting that covers ILC detector simulation software?

The weekly LCD software meeting for discussing all aspects of detector simulations and analysis and reconstruction. This meeting takes place every Tuesday at 1:30 PST, unless cancelled.

Are there mailing lists for questions or announcements about ILC detector simulation?

lcd-l
lcd-dev
calice-sw

Detector Concepts

What are the proposed detector concepts?

There are now four proposed detector designs for the ILC, each of which has an an outline document.

(above based on slide from Hitoshi Yamamoto)

What is the SiD?

• Silicon Detector (SiD) (American origin)
  • Silicon tracker, 5T field
  • SiW ECAL
  • 4 'coordinators' (2 Americans, 1 Asian, 1 European)

From the SiD homepage, "The Silicon Detector Design Study is being organized to develop the SiD Detector Concept into a detailed, optimized, and fully integrated detector design on a roughly one year time scale. The SiD concept incorporates Si/W calorimetry and Si tracking in a Linear Collider detector design which attempts to optimize physics performance while realistically constraining costs."

SiD Detector Outline Document
SiD Meeting Agendas - with documents

What is the GLD?

GLD Detector Outline Document

GLD Detector Outline Document Kickoff

• GLD (Asian origin)
  • TPC (+Large Silicon IT), 3T field
  • W/Scintillator ECAL ("large" radius)
  • 6 'contact persons': (2 Americans, 2 Asians, 2 Europeans)

What is the LDC?

• Large Detector Concept (LDC) (European origin)
  • TPC (+Silicon IT), 4T field
  • SiW ECAL ("medium" radius)
  • 6 'contact persons': (2 Americans, 2 Asians, 2 Europeans)

LDC Detector Outline Document

What is the fourth concept?

• fourth concept

Fourth Concept Outline Document

Subsystems

Where can I go for information about ILC detector R&D programs?

LCRD UCLC FY06
ILC Detector R&D - mostly archival materials

What are the main subsytems of an ILC detector?

vertexing
foward tracking
central tracking
calorimetry (ECAL, HCAL)
muon system
magnet
DAQ, electronics, detector integration

(from slide of Ties Behnke)

Calorimetry

What technologies are being considered for the HCAL?

RPC - Stainless Steel (SS)
GEM - SS
scintillator - SS
DREAM
hybrid

What technologies are being considered for the ECAL?

Si - W
Si - Pb
scintillator - W, Pb
lead tungstate crystals
hybrid

What technologies are being considered for the MUON subsystem or tailcatcher?

RPC
scintillator

Tracking

What technologies are being considered for the tracking system?

Silicon
TPC

Vertexing

What technologies are being considered for the vertexing system?

Forward Region

luminosity monitor
beam monitor
photon calorimeter

Software Frameworks

What tools are available for detector simulation and related research?

(from slide of Tony Johnson)

Isn't there one main software framework for ILC detector simulation that I can use?

Each of the major detector concepts uses a separate software framework, with LCIO providing interoperability.

What frameworks are available for ILC Detector Simulations?

There are four differents toolchains that can be used, corresponding to the LDC, SiD, GLD, and "fourth detector" concepts. The software suites corresponding to the first two detectors can simulate all of the detector concepts, so there is no strict division on which tools should be used for a certain detector study.

What are the software frameworks that correspond to each design?

Which software tools are associated with SiD?

The ALCPG and SLAC use the SLIC Simulations Package (C++) with the org.lcsim for reconstruction and analysis using Java. This system also uses the JAS3 graphical analysis environment. Much of the functionality within org.lcsim comes from the FreeHep Java Library.

Which software tools are associated with GLD?

Finally, the ACFA group has a suite of softare based on the ROOT framework.

Which software tools are associated with LDC?

There is a C++ framework developed under ECFA that uses Mokka for the simulator with the MARLIN tool for analysis and reconstruction.

ILC Software Meeting at Cambridge - focuses on LDC framework (Mokka, Marlin)

What software is associated with the fourth concept?

The 4th concept is using ILCROOT, which is itself based on AliRoot.

Bug Reports

How do I file a bug report or make a feature request related to ILC software?

The SLAC Jira Bugtracker allows users to submit bug reports or make feature requests.

The projects relavent to ILC.

• SLIC
• LCDD
• GeomConverter
• LCDetectors
• LCIO
• LCSIM
• www-lcsim

Most of these packages will be covered in more detail within this FAQ.

How do I file a bug report or make feature request for auxiliary ILC software?

Several packages are used by org.lcsim that are not specific to ILC simulations. There is a separate FreeHep bugtracker for these projects.

• JAS3
• AIDA
• WIRED

How do I get an account on the ILC or FreeHep Jira?

Contact Tony Johnson <tony_johnson@slac.stanford.edu> to obtain an account on either of these systems.

Software Repositories

How can I checkout projects anonymously from the SLAC CVS?

You can checkout projects with this command.

cvs -d :pserver:anonymous@cvs.freehep.org:/cvs/lcd co [module]

The module is the name of the package to checkout of CVS.

What modules are available from the SLAC CVS?

These are the main modules.

How do I get an account at the SLAC CVS?

Contact Tony Johnson <tony_johnson@slac.stanford.edu> to request a SLAC CVS account.

Where can I go for more information about the SLAC CVS?

SLAC CVS page

Can I browse the SLAC CVS on the WWW?

jcvs

What are some other source code repositories I should know about?

Freehep CVS, Freehep Maven Repositories
LCIO
CALICE
Marlin, MarlinReco, CED
GDML

What are the recommended CVS tools for Windows users?

Windows users should look at Tortoise CVS which adds extensions to Explorer for easily checking out and managing CVS projects.

Geant4 and CLHEP

What is Geant4?

Geant4 is the core Monte Carlo simulator used by all ILC detector simulations programs. It tracks the passage of particles through matter and simulates the particle interactions.

How do I build Geant4?

Before installing Geant4, you need to download and build http://proj-clhep.web.cern.ch/proj-clhep/.

Then download the Geant4 sources from the distribution page.

Once you have obtained the sources, please read the Installation Guide carefully.

The following sequence of commands should get you up and running on Linux (using bash shell).

export CLHEP_BASE_DIR=/your/path/to/clhep
tar -zxvf geant4.x.tar.gz
cd geant4.x
export G4INSTALL=$(pwd)
export G4WORKDIR=$(pwd)
export G4SYSTEM=Linux-g++
cd geant4.x/source
make
make includes
cd ../physics_lists/hadronic
make

This will take up to several hours depending on the speed of your machine.

Next, try to build an example application.

cd geant4.x/examples/novice/N03
export G4WORKDIR=$(pwd)
make all

Now you should have the ./bin/Linux-g++/N03 binary.

How do I rebuild just the Geant4 visualization libraries?

After reconfiguring your environment using the G4VIS variables, rebuild the Geant4 visualization as follows.

cd $G4INSTALL/source/visualization
gmake clean
gmake
cd $G4INSTALL/source/interfaces
gmake clean
gmake
cd $G4INSTALL/source
gmake libmap

SLIC

What is SLIC?

SLIC stands for "Simulator for the Linear Collider". It is a full simulation package that uses the Geant4 Monte Carlo toolkit to simulate the passage of particles through the detector. SLIC outputs LCIO files that can be analysed using a variety of frameworks and language bindings. SLIC uses a separate backend for the input of detector data called Linear Collider Detector Description (LCDD), which itself is based on the GDML project from CERN.

Where is SLIC's homepage?

The SLIC Confluence page is the best source for up-to-date information on this software package.

Who is the primary maintainer of SLIC?

Jeremy McCormick <jeremym@slac.stanford.edu> is the primary author and maintainer of SLIC. The handling of MCParticles in SLIC was based on earlier work by Ron Cassell <cassell@slac.stanford.edu> from a package called Linear Collider Simulator (LCS). Much work has also been done by Ron to verify and debug the LCIO output files.

Where should I go for news or announcements about SLIC?

At which HEP sites and labs is SLIC installed?

Fermilab: Here are instructions for Fermilab users on getting started with SLIC.

SLAC: Here are instructions for SLAC users on running slic from the public Unix machines at the lab. SLIC can be used on any of the load-balanced interactive Linux clusters, including noric, iris, and yakut.

NICADD: A copy of SLIC is available on the NICADD Linux clusters at /k2data/APPS/SimDist.

Installing SLIC

Which operating systems and compilers does SLIC support?

These are known working configurations of platform and compiler.

The only supported compiler is g++. Other versions may work, but these are the ones that are known to build successfully.

How do I get simulation binaries for my platform?

SimDist downloads contain binaries for Linux, OSX, and Windows.

These are located at ...

http://www.lcsim.org/dist/slic/

To download a Linux release, use these commands.

wget http://www.lcsim.org/dist/slic/slic-1_13_3-Linux-g%2B%2B-bin.tar.gz
tar -zxvf slic-1_13_3-Linux-g++-bin.tar.gz

What is SimDist?

The SimDist package bundles together all the dependencies of SLIC into one project. This greatly simplifies the build process.

How can I compile simulation binaries for my platform?

Follow the build instructions for the SimDist project to make binaries for your platform.

How do I build SLIC and the packages it depends on from scratch?

Building SLIC and its dependencies "from scratch" is not encouraged now that the SimDist project can manage this build procedure.

There are separate instructions for building on Linux and building on Windws if you must do this.

Running SLIC

How do I run if I installed with SimDist?

SimDist has a run script at scripts/slic.sh which will setup the LD_LIBRARY_PATH to contain the Xerces lib directory and execute the current slic binary from the packages/slic/$SLIC_VERSION directory.

It is useable from anywhere on the host where it was installed.

/path/to/my/SimDist/scripts/slic.sh [options]

This script passes all arguments to slic, so use it as you would the normal binary.

How do I run the simulator binary from the slic home directory?

Assuming you are within the slic package's top directory you would run it with this command.

./bin/$G4SYSTEM/slic [options]

The G4SYSTEM variable depends on your platform. For instance, on Linux, it is set to Linux-g++, so the command would be ...

./bin/Linux-g++/slic [options]

Does SLIC have any runtime dependencies?

If you installed SLIC in the recommended way, the only runtime dependency would be the Xerces C++ shared library. The Xerces library directory needs to be added to the LD_LIBRARY_PATH (bash), so that the loader can find this library when slic executes.

export LD_LIBRARY_PATH=/path/to/my/xerces/install/lib:$LD_LIBRARY_PATH

If you see this error, it means that the LD_LIBRARY_PATH has not been set correctly.

./slic/bin/Linux-g++/slic: error while loading shared libraries: libxerces-c.so.27: cannot open shared object file: No such file or directory

The SimDist run script will set this variable automatically.

How do I get help on the command-line syntax?

To see explanations of slic's command-line options, use the "-h" option.

slic -h

This will print slic usage and exit.

What command-line options does SLIC support?

Typing slic -h will print the available command-line options.

************************
* Command Line Options *
************************

Option  Full Name       Min Args  Max Args  Macro Command           Description
---------------------------------------------------------------------------------------------------------------------------
-h      --help          0         0         /slic/usage             Print SLIC usage.
-n      --interactive   0         0         /control/interactive    Start a Geant4 interactive session.
-v      --version       0         0         /slic/version           Print SLIC version.
-m      --macro         1         1         /control/execute        Execute Geant4 commands from a file.
-g      --lcdd-url      1         1         /lcdd/url               Set LCDD geometry file URL.
-i      --event-file    1         1         /generator/filename     Set event input file full path.
-o      --lcio-file     1         1         /lcio/filename          Set name of LCIO output file.
-p      --lcio-path     1         1         /lcio/path              Set directory for LCIO output.
-O      --autoname      0         1         /lcio/autoname          Automatically name the LCIO output file.
-x      --lcio-delete   0         0         /lcio/fileExists delete Delete an existing LCIO file.
-r      --run-events    1         1         /run/beamOn             Run # of events.
-s      --skip-events   1         1         /generator/skipEvents   Set number of events to skip.
-l      --physics-list  1         1         /physics/select         Set Geant4 physics list.
-L      --log-file      0         0         /log/filename           Set logfile name.
-d      --seed          0         1         /random/seed            Set the random seed.  (No argument seeds with time.)

Each option is mapped in a straightforward way to a corresponding Geant4 UI command, so the same exact commands can be executed either from the command prompt or in the Geant4 interactive terminal.

How do I find out about the SLIC version I am running?

The command

slic -v

prints the SLIC version, along with a lot of other information (probably too much).

Simulator for the Linear Collider; SLIC; v1r13p6; Jeremy McCormick and Ron Cassell; SLAC; Tue Apr  4 17:32:07 PDT 2006

The /slic/version command will do the same from a macro or UI terminal.

How do I get detailed information about the SLIC version I am running?

SLIC prints a splash screen as it starts up with the version, build date, and other information.

*************************************************************
 App     : Simulator for the Linear Collider (SLIC)
 Version : v1r13p6
 Date    : Tue Apr  4 17:32:07 PDT 2006
 Authors : Jeremy McCormick and Ron Cassell
 Inst    : SLAC
 WWW     : http://www.lcsim.org/software/slic
 Contact : jeremym@slac.stanford.edu
*************************************************************

How do I find out the version of Geant4 that SLIC was built with?

The Geant4 toolkit prints a splash screen that SLIC displays when it starts up.

*************************************************************
 Geant4 version Name: geant4-08-00-patch-01    (10-February-2006)
                      Copyright : Geant4 Collaboration
                      Reference : NIM A 506 (2003), 250-303
                            WWW : http://cern.ch/geant4
*************************************************************

The Geant4 version in the figure above is 8.0.p01.

How do I get help on SLIC's custom Geant4 commands?

SLIC commands are added into various directories within the Geant4 UI hierarchy. From interactive mode, use this command to print information on a SLIC or LCDD command.

help [command]

Those directories containing only SLIC or LCDD commands are marked with SLIC or LCDD.

/lcio/   LCIO output commands. [SLIC]

Type

help [dir]

or

help [command]

for information about the user interface directory or command. Of course, this requires that the programmer actually put in some useful help string. Most commands and directories have such information.

How do I run a macro containing UI commands?

You can put Geant4 UI commands into one or more macro files that slic can execute. This is done with the "-m" switch. There can be any number of these switches given to slic at the commandline. For instance, this command will execute the two macros init.mac and run.mac.

slic -m init.mac -m run.mac

The macros are executed in the order given at the command-line.

If macros are interspersed throughout the command switches, then SLIC will also execute each command in order.

slic -m init.mac -x -o output -p myDir -m run.mac

First init.mac will be executed. Then the three commands corresonding to the "-xop" switches and finally run.mac presumably executes the /run/beamOn command.

How do I run in interactive mode?

SLIC can be started in interactive mode using the -n option or the /control/interactive UI command.

This command will start Geant4 in PreInit mode where the geometry is not loaded.

slic -n

Other commands may also be executed before the interactive mode starts.

slic -g myGeom.lcdd -n

The LCDD file will be constructed, so the simulator will start in Idle mode.

What is a typical command to run SLIC in batch mode?

The following command illustrates some of the options that could be used in a typical batch run.

slic -g myGeom.lcdd \              # geometry file
     -i events.stdhep \            # StdHep input file
     -p lcio/ \                    # path for LCIO output file
     -o output.slcio \             # name of LCIO output file
     -x \                          # delete existing LCIO file
     -r 1234 \                     # seed the random engine
     -s 100 \                      # number of events to skip
     -r 1000                       # number of events to run

How can I check on the progress of my SLIC job(s)?

In bash, direct all output to a file, as follows.

slic &> job.log &

Now use the tail command to look at the output file as the job progresses.

tail -f job.log

The BeginEvent and EndEvent markers are the best indicators of the job's progress.

Most batch systems will provide logging services, and the tail command can be used on these files, too.

How do I run SLIC on the LSF batch system?

The bsub command is used to run SLIC on LSF.

This is an example of submitting a job to run 1000 events through the sid00 detector on the xlong batch queue.

bsub -q xlong -o `pwd`/job.log -e `pwd`/err.log time slic -g sid00.lcdd -i events.stdhep -o events_sid00 -r 1000

LSF accepts plain bash scripts to start jobs. Mine usually use a few for loops to run combinations of geometries with StdHep files.

for g in $(ls *.lcdd); do
  for s in $(ls stdhep/*.stdhep); do
    fname=$(basename ${s%.*})_$(basename ${g%.*})
    bsub -o `pwd`/$fname.log -e `pwd`/$fname.err -q xlong time slic -g $g -i $i -o $fname
  done
done 

The stdhep directory should contain a symlink to the StdHep files used for input events.

Example LSF submission scripts can be found in Jeremy McCormick's jobs directory on the SLAC Linux machines at ~jeremym/work/jobs.

How can I make SLIC look for XML schemas in a local directory?

The current directory is always searched for the XSD files, first.

The GDML_SCHEMA_DIR environment variable may point to a single directory where all XSD files should be located. LCDD uses GDML for entity resolution, also, so the LCDD schemas can be placed in this directory, also.

How do I install the XML schemas to a local directory?

From the lcdd directory, execute make schema_install to copy all the GDML and LCDD schemas in the schemas directory to another existing directory.

How can I automatically set the name of the LCIO file?

The -O switch turns on SLIC's auto-naming feature, which will give the output file a reasonable name based on the event generator used and the name (or tag) of the geometry. The /lcio/autoname command is the corresponding UI command.

How can I customize SLIC's autonaming feature?

The autoname feature can be customized by providing arguments to the /lcio/autoname command. These specify fields that should be inserted in the automatically generated filename.

Here is a summary of these options.

The following command illustrates the autoname feature.

/lcio/autoname event application version geometry

It would result in an automatically-generated name similar to neutrons_SLIC_v1r13p6_myGeometry.

How can I automatically delete an existing LCIO file?

The -x option or /lcio/fileExists delete option will cause an existing LCIO file to be overwritten.

How do I skip events in a StdHep file?

The -s option or /generator/skipEvents command take the number of events to skip as an argument. This is only applicable to file-based event sources such as StdHep or LCIO files.

How do I set the random seed?

The -r option or the /random/seed command controls the CLHEP random seed setting. Without an argument, the current time is used as a seed. Otherwise, an integer argument is used as the seed.

How do I dump the state of the CLHEP random engine?

Dumping random state is a built-in feature of Geant4.

Turn on the save feature.

/random/setSavingFlag true

This will cause the random state for each event to be saved to currentEvent.rndm.

To save the current event to a unique file, use this command.

/random/saveThisEvent

This copies currentEvent.rndm to runXXXevtYYY.rndm.

To do this for every event, put the saveThisEvent command in a macro called rndmSave.mac and run events in this fashion.

/run/beamOn 1000 rndmSave.mac

This will cause the random state to be dumped for every event.

How can I set the directory for the random dumps?

The /random/setDirectoryName command sets the base directory where the rndm files will be placed.

How do I load back the state of the random engine that I dumped previously?

To restore the random state, use this Geant4 UI command.

/random/resetEngineFrom currentEvent.rndm

This can be used to "replay" events of interest. This feature will probably be used with SLIC's skipEvents feature in order to jump to the event first before restoring its random state.

/random/resetEngineFrom run0event1000.rndm
/generator/skipEvents 1000

How can I see which physics lists are available?

Execute the command /physics/printLists to see the available Geant4 physics lists.

How do I set the physics list?

The -l option or /physics/select command takes the name of the physics list to use as an argument.

/physics/select LHEP

This must happen in the PreInit stage. Once the simulator is in Idle state, the physics list is set permanently for that run, and SLIC must be restarted to use a different list.

How can I customize Geant4's stepping in the magnetic field?

A number of options are available for tweaking the handling of transportation through the magnetic field in the /field command directory.

The command selectStepper sets the integrator, where the argument can be one of the following.

G4ClassicalRK4
G4ExplicitEuler
G4HelixExplicitEuler
G4HelixHeum
G4HelixImplicitEuler
G4HelixSimpleRunge
G4ImplicitEuler
G4CashKarpRKF45
G4SimpleHeum
G4SimpleRunge

The command setDeltaOneStep sets the maximum stepsize that will be taken in the field.

The command setDeltaIntersection sets the maximum distance from the chord line.

Refer to the Electromagnetic Fields Chapter of the Geant4 Application Guide for more details on these settings.

How do I set the maximum number of events?

The -r switch sets the number of events to run, and it corresponds to Geant4's built-in /run/beamOn command.

What event generators are available from within SLIC?

SLIC can read StdHep files using Willy Langeveld's lightweight XDR interface from Lelaps.

An MCParticles collection of an LCIO file can also be used as a source of events, which is useful for repeating events run in other simulation frameworks.

How do I use a StdHep file?

To select a StdHep file with physics events, use the -i switch or /generator/filename command followed by an absolute or relative path to the file. Any file with an extension of .stdhep or .xdr will be automatically interpretted as a StdHep file.

How do I use an LCIO file as an event source?

SLIC also accepts LCIO files as event sources. Use the commands as if the file were a StdHep source, and the LCIO generator will be automatically selected if the file has the extension of .slcio.

How do I use the General Particle Source (GPS)?

Geant4 includes a flexible and powerful particle generator called the General Particle Source or GPS.

Execute this command to select GPS as the event source.

/generator/select gps

Actually, GPS is the default, but this can be used to switch if another generator is being used (e.g. in interactive mode).

Refer to the GPS User's Guide for detailed instructions on using this tool.

There are also a few sample GPS macros in the slic CVS project at macros/gps*.mac_.

How do I use the particle gun?

Geant4 includes a simple particle gun that can be selected with this command.

/generator/select gun

However, GPS is the recommended single particle source, and the G4ParticleGun should be considered deprecated, in my opinion.

How can I print information about the current event generator?

Use the command /generator/dumpEvent to display information about the current generator and its event.

What GUIs are available for SLIC?

There are only a limited number of

SLIC Runner is a Java program that uses Swing.

TODO: Fix SLIC Runner to work with latest SLIC.

The built-in GUIs of Geant4 are available, including the XM interface.

If I have a problem with SLIC or find a bug, what information should I include in my report?

Please include the following information in bug reports.

• Your name and institutional affiliation
• Operating system and version

• Version of gcc compiler

  Code Block
  gcc -v

• Versions of all SimDist software packages

  Code Block
  cat SimDist/packages/*/VERSION &> myversions.txt

• If not using SimDist, please provide at least the SLIC and GEANT4 version numbers.
• Run macro for reproducing the bugged LCIO file
• Publically accessible location of the StdHep input file (if any)
• Versions of GeomConverter and org.lcsim that you are using (if applicable)

Geometry using GDML and LCDD

Why would you use XML for describing detector geometry?

• naturally hierarchical
• platform independent
• human edittable
• extendable
• described by a standardized and powerful schema language (XML Schema or XSD)
• generated or transformed easily from nearly any programming language (C++, Java, Python, etc.)
• enjoys broad support and acceptance
• overall a good fit for describing detector data

What is GDML?

GDML stands for Geometry Description Markup language. It is an XML format for the description of CSG geometries with a primary binding to the Geant4 toolkit. There is also a Python binding with Root. GDML allows geometry data to be interchanged between difference programs, such as simulators, analysis and reconstruction software, and visualization tools.

What features does GDML support?

GDML defines a document structure and a list of legal elements.

• defines
  • constants, reflections, positions, rotations
• materials
  • material, isotope, element, mixture
• solids
  • box, sphere, tube, cone, polycone, parallepiped, trapezoid, torus, polyhedra, hyperbolic tube, elliptical tube, ellipsoid
    boolean solids
• volumes
  • assembly volumes and reflections
  • replicas and divisions
  • parameterised volumes (position, rotation and size)

Where can I go for more information on GDML?

The current, primary maintainer of GDML, Witold Pokorski, made a good overview presentation of GDML for the CHEP 2006 conference.

Browse the GDML CVS online or use the LXR browser.

A supplementary page is maintained by Jeremy McCormick at http://www.lcsim.org/software/gdml.

What is LCDD?

LCDD is the Linear Collider Detector Description markup language, and is itself based on the GDML toolkit.

Why should I use LCDD?

The LCDD geometry backend is designed for prototyping, debugging, and experimenting with different detector geometries, material definitions, readouts, and physics settings. There are many options to explore in the Geant4 toolkit, so having this type of "Swiss Army Knife" tool saves a lot of (programming) time.

LCDD provides a 100% runtime description of the detector and its associated properties, including the detailed volume hierarchy, assignment and properties of sensitive detectors, and the specification of detector component identifiers, among many other features. In practice, writing files in this standardized format is much easier than trying to author custom C++ code for each proposed full detector design and their subdetectors.

What features does LCDD support?

• volumes
  • logical volumes
    • assignment of sensitive detector, visualization attributes, region, physics lists
  • physical volumes
    • volumes identifiers
• sensitive detectors
  • tracker
  • calorimeter
    • readout binning and segmentation
• magnetic field
  • simple solenoid
  • RZB map
• visualization attributes
• region
• physics limits
• identifiers
  • 32 and 64 bit ids
  • identifier dictionary

Where can I go for more information on LCDD?

LCDD Homepage

Where can I find examples of LCDD?

The directory examples in the slic CVS project contains a number of hand-coded LCDD example files.

What is the best way to create LCDD files?

Use the compact description.

Or hand-code them.

How do I dump the current Geant4 geometry to GDML using SLIC?

/lcdd/dumpGDML mygeom.gdml

How do I read an LCDD file using SLIC?

LCDD can read files either from the local file system or from a URL. The file location can be set with the -g option and its corresponding command /lcdd/url.

This is an example of reading a local file from the command line.

slic -g /path/to/myGeom.lcdd

This command reads the geometry from a URL.

slic -g http://www.lcsim.org/detectors/sid00/sid00.lcdd

If the -g option is specified from the command-line, SLIC assumes that the simulator should be initialized to the Idle state after the geometry is loaded.

How do I read a GDML file using SLIC?

The LCDD system supports reading both plain GDML and LCDD files from SLIC.

To read in a "plain" GDML file, simply use the "-g" option as you normally would ...

slic -g myGeom.gdml

The LCDD system will use the GDML schema instead of LCDD and the geometry should be loaded successfully.

How do I check my Geant4 geometry for overlaps?

/geometry/test/recursive_test

Detector and Event Visualization

How can I use Geant4 to visualize the detector?

The Geant4 OpenGL visualization driver can be used to immediately visualize the detector and events. The following command can be used to visualize the detector geometry plus hits and trajectories from the event.

/vis/scene/create
/vis/scene/add/volume
/vis/scene/add/hits
/vis/scene/add/trajectories
/vis/open OGLSX

There is a similar macro in the slic directory at macros/vis_gl.mac.

How can I make a HepRep file using Geant4?

A command similar to this will write out a HepRep zip file to the current directory.

/vis/scene/create 
/vis/open HepRepXML
/vis/viewer/set/culling global false
/vis/scene/add/volume 
/vis/scene/add/trajectories
/vis/scene/add/hits

How do I use DAWN from within Geant4?

/vis/open DAWNFILE

How can I make cuts using DAWN?

dawncut

What other visualization systems are available in Geant4?

VRML
OpenInventor (Coin3D)
RayTracerX
RayTracer

What external visualization options are available?

GDML -> python -> ROOT
WIRED

What is WIRED?

WIRED Homepage

How do I use WIRED?

WIRED tutorial

LCIO

What is LCIO?

LCIO stands for Linear Collider IO. It is the standard data format for exchanging event data between different ILC software, including simulators and reconstruction and analysis tools.

What languages does LCIO support?

• Java
• C++
• Python
• FORTRAN

What simulation tools support LCIO?

Nearly all of the simulation tools support LCIO, including the following tools.

• SLIC
• Mokka
• JUPITER
• BRAHMS

SLIC is unique in that it can read LCIO files as a physics event source.

What reconstruction and analysis tools support LCIO?

The MARLIN tool and its associated MarlinReco processors all support the LCIO format.

The org.lcsim Java framework includes its own implementation of LCIO in the package org.lcsim.util.lcio. This is compatible with the Java implementation included in the LCIO CVS project.

If I don't want to generate files myself, are there LCIO files available that I can use to get started with my analysis?

A SLAC ftp site has LCIO files available, mostly generated using SLIC. Follow the ftp instructions to find and download the files that you want to use.

How do I request new LCIO files?

Contact Norman Graf <ngraf@slac.stanford.edu> if you want some LCIO files generated by SLIC that are not available from the ftp site.

What tool can I use to look at LCIO output from the command line?

LCIO comes with the dumpevent tool that dumps an LCIO file's contents from the command-line. Typically, this would be used with a pager.

$LCIO/bin/dumpevent outfile.slcio 0 1 | less

The above command dumps the direct event of outfile.slcio file starting at run number 0.

What tool can I use to look at LCIO output from within JAS3?

The LCSim Event Browser can be used to look at LCIO files from within JAS3 using org.lcsim.

The LCSim Event Browser instructions show how to use this tool.

How can I create detailed diagnostic histograms of LCIO event data?

The SlicDiagnostics package creates AIDA files with detailed plots of LCIO event data, focused on the simulation classes: CalorimeterHit, TrackerHit, and MCParticle. Contact Jeremy McCormick <jeremym@slac.stanford.edu> if you would like more information about obtaining and using this package.

Where can I post my questions about LCIO?

LCIO forum

Where can I go for more information about LCIO?

LCIO homepage

Compact Detector Description

What is the Compact Detector Description?

The compact description provides an abbreviated format for describing a full detector and its subcomponents to the org.lcsim reconstruction and analysis subsystem.

The compact detector description schema specifies the structure of this format as an XML schema (XSD file).

How does the compact format work?

The package org.lcsim.geometry.compact transforms XML from the compact description into various targets. These include the LCDD language for the simulator and Java runtime objects for reconstruction and analysis.

Where is the standard location for compact XML files and their matching LCDD description?

Compact detectors are kept at this base url in zip files named with the detector tag.

http://www.lcsim.org/detectors

For instance, this is the location of the sid00 detector's resource file.

http://www.lcsim.org/detectors/sid00.zip

The org.lcsim conditions system will use this URL automatically. Otherwise, a tool like wget can be used to download it manually.

Where is the list of available compact descriptions?

A list of available compact detectors is kept at this URL.

http://www.lcsim.org/detectors/taglist.txt 

This is list is updated periodically depending on the current detectors in LCDetectors.

How do I make org.lcsim find a full detector that is not in the standard area at lcsim.org?

Add an alias to ~/.lcsim/alias.properties which points to your detector's resources.

A zip file.

mydet: file:///path/to/mydet.zip

Or the directory.

mydet: file:///path/to/mydet/

What is LCDetectors and how do I use it?

LCDetectors contains detectors in the compact description for use with org.lcsim.

Where can I find documentation on the detectors in LCDetectors?

Detectors Wiki

How do I convert compact detectors into LCDD using GeomConverter?

GeomConverter/bin/GeomConverter -o lcdd compact.xml mydet.lcdd

How do I define constants?

All attribute values are evaluated by the JDOM expression factory.

<constant name="myval" value="2.0 * cm"/>    

After being defined, constants can be used from anywhere in the compact description. This is useful for reusing values in detector definitions.

What are the compact descriptions default units?

What "magic" constants are expected by the compact reader?

<define>

  <!-- centimeters -->
  <constant name="cm" value="10"/>

  <!-- world -->
  <constant name="world_side" value="30000" />
  <constant name="world_x" value="world_side" />
  <constant name="world_y" value="world_side" />
  <constant name="world_z" value="world_side" />

  <!-- tracking region -->
  <constant name="tracking_region_radius" value="175.*cm"/>
  <constant name="tracking_region_zmax" value="282.*cm"/>

</define>

How do I create my own compact detector?

Defining a Detector

How do I define a cylindrical calorimeter?

Cylindrical calorimeter barrel.

<detector id="1" name="EMBarrel" type="CylindricalBarrelCalorimeter" readout="EcalBarrHits">
  <dimensions inner_r = "ecal_barrel_inner_r" outer_z = "ecal_barrel_outer_z" />
  <layer repeat="30">
    <slice material = "Tungsten" thickness = "ecal_absorber_thickness" />
    <slice material = "Silicon" thickness = "ecal_sensor_thickness" />
  </layer>
</detector>

Cylindrical endcap calorimeter.

<detector id="2" name="EMEndcap" reflect="true" type="CylindricalEndcapCalorimeter" readout="EcalEndcapHits">
  <dimensions inner_r = "ecal_endcap_inner_r" inner_z = "ecal_endcap_inner_z" outer_r = "ecal_endcap_outer_r" />
  <layer repeat="30">
    <slice material = "Tungsten" thickness = "ecal_absorber_thickness" />
    <slice material = "Silicon" thickness = "ecal_sensor_thickness" />
  </layer>
</detector>

How do I define a polyhedra calorimeter?

Polyhedra calorimeter barrel.

<detector id="3" name="EMBarrel" type="PolyhedraBarrelCalorimeter" readout="EcalBarrHits">
  <dimensions z="ecal_barrel_full_z" numsides="8" rmin="ecal_barrel_rmin"/>
    <layer repeat="30">
      <slice material="Tungsten" thickness="ecal_absorber_thickness"/>
      <slice material="Silicon" thickness="ecal_sensor_thickness" sensitive="yes"/>
    </layer>
</detector>

Polyhedra endcap calorimeter.

<detector id="4" name="EMEndcap" reflect="true" type="PolyhedraEndcapCalorimeter" readout="EcalEndcapHits">
  <dimensions numsides="8" rmin="ecal_endcap_rmin" rmax="ecal_endcap_rmax" zmin="ecal_endcap_zmin"

<detector id="1" name="EMBarrel" type="CylindricalBarrelCalorimeter" readout="EcalBarrHits">
  <dimensions inner_r = "ecal_barrel_inner_r" outer_z = "ecal_barrel_outer_z" />
  <layer repeat="30">
    <slice material = "Tungsten" thickness = "ecal_absorber_thickness" />
    <slice material = "Silicon" thickness = "ecal_sensor_thickness" sensitive="yes"/>
  </layer>
</detector>

How do I define calorimeter readout?

GridXYZ segmentationCylindrical endcap calorimeter.

<detector<readout idname="2HcalBarrHits" name>
  <segmentation type="EMEndcapGridXYZ" reflectgridSizeX="true10.0" type="CylindricalEndcapCalorimeter" readout="EcalEndcapHitsgridSizeY="10.0"/>
  <id>layer:7,system:6,barrel:3,x:32:-16,y:-16</id>
</readout>

Nonprojective cylinder.

<readout name="EcalBarrHits">
  <dimensions inner_r = "ecal_endcap_inner_r" inner_z = "ecal_endcap_inner_z" outer_r = "ecal_endcap_outer_r<segmentation type="NonprojectiveCylinder" gridSizePhi="0.35*cm" gridSizeZ="0.35*cm" />
  <layer repeat="30<id>system:8,layer:8,barrel:3,phi:32:16,z:-16</id>
</readout>

Projective Z plane (projective endcap).

<readout name="HcalEndcapHits">
    <slice material = "Tungsten" thickness = "ecal_absorber_thickness" <segmentation type="ProjectiveZPlane" thetaBins="600" phiBins="1200"/>
  <id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id>
</readout>

Projective cylinder.

<readout name="HcalBarrHits">
 <slice material<segmentation type="ProjectiveCylinder" thetaBins="Silicon600" thickness phiBins= "ecal_sensor_thickness1200" />
  </layer><id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id>
</detector>readout>

How do I define a

...

silicon tracker?

Polyhedra calorimeter Tracker barrel.

<detector id="31" name="EMBarrelTrackerBarrel" type="PolyhedraBarrelCalorimeterMultiLayerTracker" readout="EcalBarrHitsTkrBarrHits">
  <dimensions<layer zid="ecal_barrel_full_z" numsides="8" rmin="ecal_barrel_rmin"/>
    <layer repeat="30">
    1" inner_r = "20.000*cm" outer_z = "26.7*cm">
  <slice material = "TungstenSilicon" thickness ="ecal_absorber_thickness" "0.00048*cm" />
  <!--    <slice material="Silicon" thickness="ecal_sensor_thickness" sensitive="yes"/>
    N layers can go here -->
</layer>
</detector>

Polyhedra Tracker endcap calorimeter.

<detector id="414" name="EMEndcapTrackerEndcap" reflecttype="trueDiskTracker" typereflect="PolyhedraEndcapCalorimetertrue" readout="EcalEndcapHitsTkrEndcapHits">
  <dimensions<layer numsidesid="81" rmin="ecal_endcap_rmin" rmax="ecal_endcap_rmax" zmin="ecal_endcap_zmin"/>
  <layer repeat="30">
    <slice material="Tungsten" thickness="ecal_absorber_thickness"/inner_r = "4.0*cm" inner_z = "30.0*cm" outer_r = "25.000*cm">
    <slice material = "Silicon" thickness ="ecal_sensor_thickness "0.03*cm" sensitive = "yes" />
  </layer>
  <!-- N layers can go here -->
</detector>

How do I define

...

a TPC?

<readout<detector nameid="HcalBarrHits2">
  <segmentation type name="GridXYZTPC" gridSizeXtype="10.0TPC" gridSizeYreadout="10.0TPCHits"/>
  <id>layer:7,system:6,barrel:3,x:32:-16,y:-16</id>
</readout>

Nonprojective cylinder.

<readout name="EcalBarrHits">
  <segmentation type="NonprojectiveCylinder" gridSizePhi="0.35*cm" gridSizeZ="0.35 <dimensions inner_r = "36.2*cm" outer_z = "250.0*cm" />
  <id>system:8,layer:8,barrel:3,phi:32:16,z:-16</id>
</readout>

Projective Z plane (projective endcap).

<readout name="HcalEndcapHits">
  <segmentation type="ProjectiveZPlane" thetaBins="600" phiBins="1200"/>
  <id>layer:7,system:6,barrel:3,theta:32:11,phi:11</id>
</readout>

Projective cylinder.

<layer repeat="200">
    <slice material="P10" thickness="tpc_gas_thickness" sensitive="yes" />
  </layer>
</detector>

How do I define a tracker readout?

Unlike calorimeters, tracker hits are written out "in the raw" without any digitization (or binning), so no segmentation is used at the simulation level.

<readout name="TkrBarrHits"

<readout name="HcalBarrHits">
  <segmentation type="ProjectiveCylinder" thetaBins="600" phiBins="1200"/>
  <id>layer:710,system:6,barrel:3,theta:32:11,phi:11<3</id>
</readout>

How do I define a

...

simple magnetic field?

<fields>
<detector id="1" name="TrackerBarrel" <field type="MultiLayerTrackerSolenoid" readoutname="TkrBarrHitsGlobalSolenoid">
    <layer id="1"     inner_r field= "205.000*cm"0"
         outer_z field= "26.7*cm">
  <slice material = "Silicon" thickness = "0.00048*cm" />
  <!-- N layers can go here -->
</layer>

Tracker endcap.

-0.6"
         zmax="1000"
         outer_radius="144*cm+(2+1)*34*cm"/>
</fields>

How do I define a magnetic field map (RZB)?

The org.lcsim package can parse a field map with a line-oriented format. This gives the magnetic field strength at a given radius (r) and z.

r z Br Bz

Reference a field map from the compact description.

<fields>
  <field type="RZFieldMap" name="RZFieldMapTest"
         gridSizeZ="10.0"
         gridSizeR="10.0"             
         numBinsZ="64"
         numBinsR="67"
         url="http://www.lcsim.org/test/solenoid_5tesla.dat"/>
</fields>

<detector id="14" name="TrackerEndcap" type="DiskTracker" reflect="true" readout="TkrEndcapHits">
  <layer id="1" inner_r = "4.0*cm" inner_z = "30.0*cm" outer_r = "25.000*cm">
    <slice material = "Silicon" thickness = "0.03*cm" sensitive = "yes" />
  </layer>
  <!-- N layers can go here -->
</detector>

How do I define a

...

new material?

<detector<material idname="2ArgonGas" name>
  <D type="TPCdensity" typevalue="TPC0.00178" readoutunit="TPCHitsg/cm3"/>
  <dimensions inner_r = "36.2*cm" outer_z = "250.0*cm<composite n="1"  ref="Ar" />
  <layer repeat</material>

<material name="200MethaneGas">
  <D  <slice material="P10" thickness="tpc_gas_thickness" sensitive="yestype="density" value="0.000717" unit="g/cm3"/>
  <composite n="1"  ref="C" />
   </layer>
</detector>

How do I define a tracker readout?

Unlike calorimeters, tracker hits are written out "in the raw" without any digitization (or binning), so no segmentation is used at the simulation level.

<readout name="TkrBarrHits">
  <id>layer:10,system:6,barrel:3</id>
</readout>

How do I define a simple magnetic field?

How do I define a magnetic field map (RZB)?

How do I define a new material?

<composite n="4" ref="H" />
</material>

<material name="ArgonGasP10">
  <D type="density" value="0.00178" unit="g/cm3"/>
   <composite<fraction n=".9"  ref="ArgonGas" />
  <fraction n=".1"  ref="ArMethaneGas" />
</material>

<material

How do I set physics limits?

<limits>
  <limitset name="MethaneGasMyLimits">
  <D type="density" value="0.000717" unit="g/cm3"/>
  <composite n="1"  ref="C  <limit name="step_length_max" particles="*" value="1.0" unit="mm" />
  <composite n="4" ref="H" />
</material>

<material</limitset> 
</limits>

Reference from a slice element within layer.

<slice limits="MyLimits" ... />

How do I set the range cut?

<regions>
  <region name="P10MyRegion">
  <D type store_secondaries="densitytrue" valuecut="0.001781" unitlunit="g/cm3"/>
  <fraction nmm" threshold="0.9001"  refeunit="ArgonGasGeV" />
  <fraction n=".1"  ref="MethaneGas" />
</material>

How do I set physics limits?

...

</regions>

Reference from a slice element within layer.

<slice limits="MyRegion" ... />

How do I add detector conditions such as sampling fractions?

These can be added to the LCDetectors directory for a detector tag. See existing detectors such as sid00 for examples.

How do I create my own subdetector type?

• define Java type in org.lcsim.geometry.subdetector
• define LCDD convertor in org.lcsim.geometry.compact.converter.lcdd

LCPhys

What is LCPhys?

LCPhys is a Geant4 Physics List tailored for linear collider detector simulation.

...

TODO: More LCPhys validation plots.

org.lcsim

What is org.lcsim?

...

What is org.lcsim?

The org.lcsim framework is a Java-based reconstruction and analysis package which has a plugin to JAS3. JAS3 provides a number of integrated tools such as the WIRED event display and an AIDA-compliant plotter.

What tools do I need to use org.lcsim?

Java     1.5
Maven    1.0
JAS3     0.8.3 (optional)
Netbeans 5.0 (optional)

How do I install org.lcsim?

The org.lcsim package uses the Java programming language, which is generally much easier to get started with and use than C++, especially for those with only partial time to devote to ILC research, as is the case for so many contributors in detector simulations.

The org.lcsim package is integrated into JAS3, which is also used by the GLAST and BaBar collaborations and others in HEP research, provides a number of integrated tools such as the WIRED event display and an AIDA-compliant plotter.

What tools do I need to use org.lcsim?

Java     1.5
Maven    1.0
JAS3     0.8.3 (optional)
Netbeans 5.0 (optional)

How do I install org.lcsim?

...

Developers can use these instructions for building lcsim.

Users who just wish to use the Event Browser and Event Display can simply install the JAS3 plugins.

What tools are provided by org.lcsim?

• physics utilities
  • stdhep reader
  • 3, 4-vector utilities
  • space geometry
  • diagnostic generator
  • Jet finder, event shape utilities
• conditions framework
  • read detector constants from zip files
  • define new detectors with zip files on the web
  • local caching
  • reading compact geometry files
• driver framework
• fast MC
  • parameterized track and cluster smearing
  • smearing constants from conditions system
  • produces ReconstructedParticles
• IO framework
• event access (EventHeader)
• event display interface (WIRED)
• digitization
  • Digisim calorimeter digi
  • tracker, vertex digitization
• clustering
  • cheater
  • cone
  • nearest neighbor (NN)
  • minimal spanning tree (MST)
  • MIP
• tracking
  • SLDWeightMatrix, TRF, Garfield
• vertexing
  • ZVTop4
• analysis examples
  • cluster diagnostics
  • SlicDiagnostics
  • PFA
  • ClusterID
  • ParticleID
• AIDA plotting interface

How do I get started with writing my own analysis code in org.lcsim?

Follow the lcsim Developer Tutorial.

How can I contribute code to org.lcsim?

Where can I go for more information on org.lcsimlcsim?

• org.lcsim Homepage
• org.lcsim Wiki

How do I use the contrib area?

Event Generation

What tools are used for ILC event generation?

How do I use Pandora-Pythia?

How do I use HERWIG?

How

...

do I use WHIZARD?

Grid

What Grids are available for ILC users?

ILC Grid at DESY

What virtual organizations (VO) are associated with the ILC grid?

ilc
calice

Which tools are available on the Grid?

• Mokka

...

How do I get a Grid certificate?

How do I download files from the Grid?

How can I run a simulation job on the Grid?

How can I run an analysis job on the Grid?

Mokka

What is Mokka?

How do I download and install Mokka?

How do I run Mokka?

...

SLAC users should get a PPDG-sponsored certificate.

registration form

Doug Olson <dlolson@lbl.gov> is responsible for the PPDG registration authority.

request ILC VO membership at DESY

create a loadable Grid certificate

What tools do I need to install to use the Grid?

How do I download files from the Grid?

How do I execute Mokka on the Grid?

How do I create my own SQL database for Mokka?

What is CGA?

How do I define my own Mokka detector or subdetector?

Marlin

What is Marlin?

What is MarlinReco

How do I download and install Marlin and MarlinReco?

Where do I go for more information about Marlin?

CALICE Testbeam Software

...

Use the lcg-cp command.

lcg-cp --vo ilc lfn:{LFNfromDB} file:{absolute path}

How can I run a simulation job on the Grid?

How can I run an analysis job on the Grid?

How do I

...

use the

...

LCG2 tools at CERN?

lxplus LCG2 instructions

Where can I go for more information about

...

the ILC Grid?

http://grid.desy.de/
http://grid.desy.de/certs/
http://grid.desy.de/users/
http://grid.desy.de/install/DESY-VO.html
http://cic.in2p3.fr/
http://cern.ch/lcg/
http://www.eu-egee.org/

Miscellaneous

What about Python?

What about ROOT?

Marlin uses AIDA -> RAIDA -> Root (But there already exists RAIDA, which is "remote AIDA", so we appear to be running out of acronyms.)

What about FLUKA?

What about Geant3?

What about AliRoot?

4th concept is using it.

What about Gismo, LCDRoot, LCDG4?

These are all deprecated simulation packages.

What about EGCS and GHEISHA?

These FORTRAN packages formed the basis for some Geant4 code, so they live on in spirit.