...
For first time users, click here for configuration information.
There is an alternative method for logging into the controls system using a Linux remote desktop via MobaXterm instructions for installations and configuration can be found here .
Conventions
$
represents the command line prompt. Type the text to the right of the $
on the command line.
Starting the LCLS Home Screen
Panel |
---|
Make sure that xwin32 is installed and running. If it's running you will see a blue X logo in the tray at the bottom right corner of the Windows screen. Launch SecureCRT or putty and connect to host mcclogin.slac.stanford.edu. If a Security Warning pops up, click Accept & Continue. Log in with your Unix username and password. At the prompt on mcclogin, type
or
or
depending on which group account you were added to in Step 2 above. If you see a prompt for a password, something went wrong and you need to contrack Ken Brobeck. Launch LCLS Home Screen. At the prompt, type:
If you don't want to type "ssh <groupname>@lcls-srv01" and "lclshome" every time you connect to the control system, click here and follow the instructions for LCLSHOME Short-Cuts. |
Starting the FACET Home Screen
Panel |
---|
Make sure that xwin32 is installed and running. If it's running you will see a blue X logo in the tray at the bottom right corner of the Windows screen. Launch SecureCRT or putty and connect to host mcclogin.slac.stanford.edu. If a Security Warning pops up, click Accept & Continue. Log in with your Unix username and password. At the prompt on mcclogin, typessh fphysics@facet-srv01 orssh facclegr@lcls-srv01 depending on which group account you were added to in Step 2 above. If you see a prompt for a password, something went wrong and you need to contrack Ken Brobeck. Launch FACET Home Screen. At the prompt, type:facethome If you don't want to type "ssh <groupname>@facet-srv01" and "facethome" every time you connect to the control system, click here and follow the instructions for LCLSHOME Short-Cuts updating lcls items to facet. |
...
Development System
Panel |
---|
Login to lcls-dev2 with
$ ssh -X -Y username@lcls-dev2.slac.stanford.edu
|
Find out what shell you are running by typing echo $SHELL . Your shell will be either tcsh or bash . ex:
I am running bash . If you are using tcsh , type this commend to enter the bash shell before proceeding:
If you are using bash , type this command:
nfsbuildepicssetup/epicsSetupAnd start up the lcls home screen by typing:
|
Troubleshooting
Panel |
Troubleshooting |
---|
If you cannot bring up the lclshome, from a SecureCRT window, double check the Xll forward has been set. See Step 4.1 above. If you still cann't bring up lclshome, verify that you have X-Win32 running. You should see an X icon on the menu bar. If the X-Win32 icon isn't there, then start X-Win32 and try to bring up lclshome again. |