Versions Compared

Old Version 55

changes.mady.by.user Mikhail Dubrovin

Saved on

compared with

New Version Current

changes.mady.by.user Mikhail Dubrovin

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Include Page
PSDM:PageMenuBeginPSDM:
PageMenuBegin
Table of Contents
Include Page
PSDM:PageMenuEndPSDM:
PageMenuEnd

Alignment procedure

...

Quality check and alignment parameters

2013-02-13

...

CSPAD2x2-1

...

Q133 D7A16

Metrology file

  /reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-01-2013-02-13/2013-02-13-CSPAD2X2-1-MEC-Metrology.txt

Quality check

Code Block
pairsegm:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    <dS/L>  angle(deg)      D1      D2      dD   d(dS)   d(dL)
pairsegm: 0   2090920902   2090220909      -2 2      -5     -43538   -43539       0  1     1   -0.00006   -0.0032900197   48297   48297       0      -7 7      -1
pairsegm: 1   2090620902   2090220906      -2 2      -2     -43538   -43538       0       0    -0.00000    0.00000   48296   48296       0       -4       0

Calibration files

  /reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-01-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.1/

  • geometry/1-end.data
  • center/1-end.data
  • tilt/1-end.data

 

2013-02-13 CSPad2x2-2.txt Q110 D3A14

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-02-2013-02-13/2013-02-13-CSPAD2X2-2-MEC-Metrology.txt

Quality check

Code Block
pair:        S1      S2     dS1     dS2 

Old version of quality check:
pair:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    <dS/L>  angle(deg)      D1      D2      dD   d(dS)   d(dL)
pair: 0   20909   20902       L12      L2-5     dL143538   43539  dL2    <dS/L> 0 angle(deg)      D11   -0.00006   D2-0.00329   48297   dD48297   d(dS)   d(dL)
pair: 0   20905   20896 7      5-1
pair: 1   20906  -4 20902    43536   435362      -2     43538 -2  43538  0.00001     0.00066   48291   48294 0     -3       90.00000       0
pair: 10.00000   48296 20905  48296 20905     -22 0    -22     43540   43536      104       6   -0.00051   -0.02895   48294   48299      -5       0       4

Calibration file

0

Calibration files

  /reg/g/psdm//reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-0201-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.21/

  • geometry

...

  • /1-end.data
  • center/1-end.data
  • tilt/1-end.data

 

2013-02-13

...

CSPAD2x2-2 Q110 D3A14

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-0302-2013-02-13/2013-02-13-CSPAD2X2-32-MEC-Metrology.txt

Quality check

Code Block
pair:segm:        S1      S2     dS1     dS2        L1      L2     dL1     dL2   <dS/L> angle(deg)   D1      D2      dD   d(dS)   d(dL) pair
segm: 0 20907 20908 -520896 -4 43540 43545 0 5 -0.00005 -0.00263 48302 48301 1 -1 -5 pair: 1 20904 20907 421 424 43538 43538 -203 -203 0.00970 0.55601 48299 48299 0 -3 0

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/geometry/0-end.data

 

2013-02-13 CSPad2x2-4.txt Q135 D19A19

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-04-2013-02-13/2013-02-13-CSPAD2X2-4-MEC-Metrology.txt

Quality check

Code Block
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20906 20905 -8 -9 43540 43540 3 3 -0.00020 -0.01119 48297 48299 -2 1 0 pair: 1 20908 20898 -12 -22 43541 43538 12 9 -0.00039 -0.02237 48299 48295 4 10 3

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-04-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.4/geometry/0-end.data

 

2013-02-13 CSPad2x2-5.txt Q022 D15A15

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-05-2013-02-13/2013-02-13-CSPAD2X2-5-MEC-Metrology.txt

Quality check

Code Block
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20904 20904 2 2 43536 43536 -1 -1 0.00005 0.00263 48294 48294 0 0 0 pair: 1 20908 20909 122 123 43540 43545 -61 -56 0.00281 0.16119 48302 48302 0 -1 -5

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-05-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.5/geometry/0-end.data

 

...

20905      -5       4    -43536  -43536      -2      -2    0.00066   48294   48291       3      -9       0
segm: 1   20905   20905      22      22    -43540  -43536       6      10   -0.02895   48299   48294       5       0      -4

Old version of quality check:
pair:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    <dS/L>  angle(deg)      D1      D2      dD   d(dS)   d(dL)
pair: 0   20905   20896       5      -4     43536   43536      -2      -2    0.00001    0.00066   48291   48294      -3       9       0
pair: 1   20905   20905     -22     -22     43540   43536      10       6   -0.00051   -0.02895   48294   48299      -5       0       4

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-02-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.2/geometry/0-end.data

 

2013-02-13 CSPAD2x2-3 Q111 D12A18

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-0603-2013-02-13/2013-02-13-CSPAD2X2-63-MEC-Metrology.txt

Quality check

Code Block
pairsegm: S1 S2 dS1 dS2 L1 L2 dL1 dL2S1 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) pair: 0 20903 20900 59 56 43541 43539 -27 -29 0.00132 0.07567 48296 48297 -1 3 2 pair: 1 20979 20977 49 47 43707 43705 -20 -22 0.00110 0.06292 48481 48477 4 2 2

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-06-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.0/geometry/0-end.data

2014-04-25-CSPAD2X2-3-MEC-Metrology.txt  (1.0 SN07 D12A18)

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2014-04-25/2014-04-25-CSPAD2X2-3-MEC-Metrology.txt

Original metrology file from Gabriel Blaj: 2014-04-25-CSPAD2X2-3-MEC-Metrology.xlsx

This should be used for any experiment AFTER April 25th 2014 (until further notice).

Quality check

Code Block
Quality check in XY plane: segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL) segm: 0 20979 20982 0 3 -43695 -43689 -2 4 -0.00197 48468 48468 0 -3 -6 segm: 1 20981 20981 123 123 -43701 -43695 51 57 -0.16127 48478 48469 9 0 -6 Quality check in Z: segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um) segm: 0 20980 -43692 43692 20980 18 5 -2 -15 11 -8 13 13 -8 11 -0.01049 0.03004 -13.001 segm: 1 20981 -43698 43698 20981 -4 -8 0 -4 -6 -2 4 4 -2 -6 -0.00262 -0.01639 -4.000

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2014-04-25/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/geometry/0-end.data

 

2015-04-02-CSPAD2X2-3-MEC-Metrology.txt  (1.0 SN07 D12A18)

Note from Gabriel and Philip

Note

Philip and I inspected the CSPAD 140Ks that we received last week (CSPAD 1,2,3,5):

- CSPADs 1, 2 and 5 have the same metrology as that on February 13, 2013.
- CSPAD 3 has been fixed meanwhile (initially it contained 2x2 module #111, which is the one in your metrology file). Now its 2x2 module is replaced with #7 (metrology file attached). This metrology file should be applied in all experiments that took place after the service date. To find out this date, we will consult with you further.
- CSPAD 4 is only a mechanical assembly (see other e-mail sent a few weeks ago).
Thanks,
Gabriel and Philip

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-022015-04-02-CSPAD2X2-3-MEC-Metrology.txt

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/2015-04-02-CSPAD2X2-3-MEC-Metrology.xlsx

Quality check

    S2     dS1     dS2        L1      L2     dL1     dL2    angle(deg)   D1      D2      dD   d(dS)   d(dL)
segm: 0   20908   20907       5       4    -43540  -43545       5       0   -0.00592   48301   48302      -1       1       5
segm: 1   20907   20904    -421    -424    -43538  -43538    -203    -203    0.55599   48299   48299       0       3       0

Old version of quality check:
pair:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    <dS/L>  angle(deg)      D1      D2      dD   d(dS)   d(dL)
pair: 0   20907   20908      -5      -4     43540   43545       0       5   -0.00005   -0.00263   48302   48301       1      -1      -5
pair: 1   20904   20907     421     424     43538   43538    -203    -203    0.00970    0.55601   48299   48299       0      -3       0

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/geometry/0-end.data

 

2013-02-13 CSPAD2x2-4 Q135 D19A19

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-04-2013-02-13/2013-02-13-CSPAD2X2-4-MEC-Metrology.txt

Quality check

Code Block
segm:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    angle(deg)   D1      D2      dD   d(dS)   d(dL)
segm: 0   20905   20906       8       9    -43540  -43540       3       3   -0.01119   48299   48297       2      -1       0
segm: 1   20898   20908      12      22    -43541  -43538       9      12   -0.02237   48295   48299      -4     -10      -3

Old version of quality check:
pair:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    <dS/L>  angle(deg)      D1      D2      dD   d(dS)   d(dL)
pair: 0   20906   20905      -8      -9     43540   43540       3       3   -0.00020   -0.01119   48297   48299      -2       1       0
pair: 1   20908   20898     -12     -22     43541   43538      12       9   -0.00039   -0.02237   48299   48295       4      10       3

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-04-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.4/geometry/0-end.data

 

2013-02-13 CSPAD2x2-5 Q022 D15A15

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-05-2013-02-13/2013-02-13-CSPAD2X2-5-MEC-Metrology.txt

Quality check

Code Block
segm:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    angle(deg)   D1      D2      dD   d(dS)   d(dL)
segm: 0   20904   20904      -2      -2    -43536  -43536      -1      -1    0.00263   48294   48294       0       0       0
segm: 1   20909   20908    -122    -123    -43540  -43545     -56     -61    0.16119   48302   48302       0       1       5

Old version of quality check:
pair:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    <dS/L>  angle(deg)      D1      D2      dD   d(dS)   d(dL)
pair: 0   20904   20904       2       2     43536   43536      -1      -1    0.00005    0.00263   48294   48294       0       0       0
pair: 1   20908   20909     122     123     43540   43545     -61     -56    0.00281    0.16119   48302   48302       0      -1      -5

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-05-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.5/geometry/0-end.data

 

2013-02-13 CSPAD2x2-6 Q157

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-06-2013-02-13/2013-02-13-CSPAD2X2-6-MEC-Metrology.txt

Quality check

Code Block
segm:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    angle(deg)   D1      D2      dD   d(dS)   d(dL)
segm: 0   20900   20903     -59     -56    -43541  -43539     -29     -27    0.07567   48298   48297       1      -3      -2
segm: 1   20977   20979     -49     -47    -43707  -43705     -22     -20    0.06292   48478   48482      -4      -2      -2

Old version of quality check:
pair:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    <dS/L>  angle(deg)      D1      D2      dD   d(dS)   d(dL)
pair: 0   20903   20900      59      56     43541   43539     -27     -29    0.00132    0.07567   48296   48297      -1       3       2
pair: 1   20979   20977      49      47     43707   43705     -20     -22    0.00110    0.06292   48481   48477       4       2       2

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-06-2013-02-13/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.0/geometry/0-end.data

2014-04-25 CSPAD2X2-3 (1.0 SN07 D12A18)

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2014-04-25/2014-04-25-CSPAD2X2-3-MEC-Metrology.txt

Original metrology file from Gabriel Blaj: 2014-04-25-CSPAD2X2-3-MEC-Metrology.xlsx

This should be used for any experiment AFTER April 25th 2014 (until further notice).

Quality check

Code Block
Quality check in XY plane:
segm:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    angle(deg)   D1      D2      dD   d(dS)   d(dL)
segm: 0   20979   20982       0       3    -43695  -43689      -2       4   -0.00197   48468   48468       0      -3      -6
segm: 1   20981   20981     123     123    -43701  -43695      51      57   -0.16127   48478   48469       9       0      -6
 
Quality check in Z:
segm:        SA      LA   XSize   YSize    dZS1  dZS2  dZL1  dZL2    dZSA  dZLA  ddZS  ddZL     dZX   dZY   angXZ(deg) angYZ(deg) dz3(um)
segm: 0   20980  -43692   43692   20980      18     5    -2   -15      11    -8    13    13      -8    11  -0.01049    0.03004    -13.001
segm: 1   20981  -43698   43698   20981      -4    -8     0    -4      -6    -2     4     4      -2    -6  -0.00262   -0.01639     -4.000

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2014-04-25/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/geometry/0-end.data

 

2015-04-02 CSPAD2X2-3 (1.0 SN07 D12A18)

Note from Gabriel and Philip

Note

Philip and I inspected the CSPAD 140Ks that we received last week (CSPAD 1,2,3,5):

- CSPADs 1, 2 and 5 have the same metrology as that on February 13, 2013.
- CSPAD 3 has been fixed meanwhile (initially it contained 2x2 module #111, which is the one in your metrology file). Now its 2x2 module is replaced with #7 (metrology file attached). This metrology file should be applied in all experiments that took place after the service date. To find out this date, we will consult with you further.
- CSPAD 4 is only a mechanical assembly (see other e-mail sent a few weeks ago).
Thanks,
Gabriel and Philip

Metrology file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/2015-04-02-CSPAD2X2-3-MEC-Metrology.txt

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/2015-04-02-CSPAD2X2-3-MEC-Metrology.xlsx

Quality check

Code Block
2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in X-Y plane:
segm:        S1      S2     dS1     dS2        L1      L2     dL1     dL2    angle(deg)   D1      D2      dD   d(dS)   d(dL)
Quad  0
segm: 0   20981   20978     -33     -36    -43703  -43708     -17     -22    0.04523   48482   48477       5       3       5
segm: 1   20978   20974    -152    -156    -43707  -43702     -73     -68    0.20189   48474   48480      -6       4      -5
Code Block
2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in X-Y plane: segm: S1 S2 dS1 dS2 L1 L2 dL1 dL2 angle(deg) D1 D2 dD d(dS) d(dL) Quad 0 segm: 0 20981 20978 -33 -36 -43703 -43708 -17 -22 0.04523 48482 48477 5 3 5 segm: 1 20978 20974 -152 -156 -43707 -43702 -73 -68 0.20189 48474 48480 -6 4 -5 2015-04-02 13:40:57 (info) CalibManager.GUIMetrology: Quality check in Z: segm: SA LA XSize YSize dZS1 dZS2 dZL1 dZL2 dZSA dZLA ddZS ddZL dZX dZY angXZ(deg) angYZ(deg) dz3(um) Quad 0 segm: 0 20979 -43705 43705 20979 -1 31 -37 -5 15 -21 -32 -32 -21 15 -0.02753 0.04097 32.009 segm: 1 20976 -43704 43704 20976 -28 -38 5 -5 -33 0 10 10 0 -33 0.00000 -0.09014 -10.007

...

 Z:
segm:        SA      LA   XSize   YSize    dZS1  dZS2  dZL1  dZL2    dZSA  dZLA  ddZS  ddZL     dZX   dZY   angXZ(deg) angYZ(deg) dz3(um)
Quad  0
segm: 0   20979  -43705   43705   20979      -1    31   -37    -5      15   -21   -32   -32     -21    15  -0.02753    0.04097     32.009
segm: 1   20976  -43704   43704   20976     -28   -38     5    -5     -33     0    10    10       0   -33   0.00000   -0.09014    -10.007

Calibration file

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/

  • geometry/0-end.datacenter/0-end.data
  • tilt/0-end.data

Calibration files

In archive

  • All files for CSPAD2x2 alignment are stored under directory /reg/g/psdm/detector/alignment/cspad2x2/
  • Files named as *-Metrology.xlsx and *-Metrology.txt are original metrology and its text version.
  • Calibration files are located under /reg/g/psdm/detector/alignment/cspad2x2/calib/ directory.
  • Calibration files can be deployed in the experimental calib store using file manager in  Calibration Management Tool

...

Code Block
/reg/d/psdm/mec/mec73313/calib/CsPad2x2::CalibV1/
                                                 MecTargetChamber.0:Cspad2x2.1/<type><calib-type>/0-end.data
                                                 ...
.
                                                 MecTargetChamber.0:Cspad2x2.1/<calib-type>/0-end.data

where <type> stands for geometry, tilt, and center.

Known detectors

on 2016-06-15:

Code Block
   0 : CxiDg2.0:Cspad2x2.0
   1 : CxiDg2.0:Cspad2x2.1
   2 : CxiDg3.0:Cspad2x2.0
   3 : CxiSc1.0:Cspad2x2.0
   4 : CxiSc2.0:Cspad2x2.0
   5 : CxiSc2.0:Cspad2x2.1
   6 : MecTargetChamberCxiSc2.0:Cspad2x2.1/<type>/0-end.data

where <type> stands for geometry, tilt, and center.

Known detectors

on 2014-07-04:

Code Block
 02
   7 : CxiDg2CxiSc2.0:Cspad2x2.0 1.3
   8 : CxiDg2CxiSc2.0:Cspad2x2.1 24
   9 : CxiSc1CxiSc2.0:Cspad2x2.05
  310 : CxiSc2.0:Cspad2x2.06
  411 : CxiSc2.0:Cspad2x2.17
  512 : CxiSc2.0:Cspad2x2.28
  613 : CxiSc2.0:Cspad2x2.39
  714 : CxiSc2MecEndstation.0:Cspad2x2.46
  815 : CxiSc2MecTargetChamber.0:Cspad2x2.50
  916 : CxiSc2MecTargetChamber.0:Cspad2x2.61
  1017 : CxiSc2MecTargetChamber.0:Cspad2x2.72
  1118 : MecEndstationMecTargetChamber.0:Cspad2x2.63
  1219 : MecTargetChamber.0:Cspad2x2.04
  1320 : MecTargetChamber.0:Cspad2x2.15
  1421 : MecTargetChamberSxrBeamline.0:Cspad2x2.2
  1522 : MecTargetChamberSxrBeamline.0:Cspad2x2.3
 16 23 : MecTargetChamberXcsEndstation.0:Cspad2x2.40
  1724 : MecTargetChamberXcsEndstation.0:Cspad2x2.51
  1825 : SxrBeamlineXcsEndstation.0:Cspad2x2.2
 19 26 : SxrBeamlineXcsEndstation.0:Cspad2x2.3
 20 27 : XcsEndstation.0:Cspad2x2.04
  2128 : XcsEndstationXppGon.0:Cspad2x2.10
  2229 : XppGon.0:Cspad2x2.01
  2330 : XppGon.0:Cspad2x2.12
  2431 : XppGon.0:Cspad2x2.23
  2532 : XppGon.0:Cspad2x2.3 4

 

Software

Access interface to any detector data and calibration parameters is implemented in Python Package Detector.

...

Whenever necessary image can be generated by the psana Module CSPadPixCoords::CSPad2x2ImageProducer, which access geometry calibration data automatically, generates 2-d image and saves it in the event store for further processing.

...

Alternatively, Python modules for CSPAD2x2 geometry are available in the package PyCSPadImage documented in CSPAD pixel coordinates and image producer in Python. They provides an interface for getting
(tick) Calibration parameters from DB and local directory,
(tick) Pixel coordinates,
(tick) Image producer

...


Deprecated

C++ classes and modules for psana

...

  • Package CSPadPixCoords generates and returns the CSPad2x2 pixel coordinates, taking into account geometry alignment parameters, if available in the expected place under /reg/d/psdm/<instrument>/<experiment>/calib directory.
  • Module CSPadPixCoords::CSPad2x2ImageProducer produces CSPad2x2 image, accounting for correct geometry, if available.

Calibration files

/reg/g/psdm/detector/alignment/cspad2x2/calib-cspad2x2-03-2015-04-02/calib/CsPad2x2::CalibV1/MecTargetChamber.0:Cspad2x2.3/

  • center/0-end.data
  • tilt/0-end.data