...
particle | energy | trigger | events | purpose | mode | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
e | 0.5 | S0+S2+S4+NOSh+NOS3+C1+C2 | 150K 200K | tagged photons from 0.5GeV beam - CU at 0 degree | sync with AD, magnet at 120A, 25K evts run, collect 150K 200K to compensate for unavoidable unradiated e in the tagger - complete statistics | ||||||
e | 0.5 | S0+S2+S4+NOSh+NOS3+C1+C2 | 10K | e in the tagger to measure 0.5GeV beam energy spread | tune magnetic field to shoot the e beam in the tagger | ||||||
e | 1 | S0+S2+NOSh+NOS3+C1+C2 | 25K | e in the CU | verify new dump position; determine statistics for the following run based on fraction of empty evts in the CAL | ||||||
e | 1 | S0+S2+S4+NOSh+NOS3+C1+C2 | 130K | tagged photons position 3 (x=-50,Y=Z=0, angle=50) |
|
| move the table in position 3 () sync with AD, magnet ON at 240A | ||||
e | 2.5 | S0+S2+NOSh+NOS3+C1+C2 | 10K | direct e in the CU to check beam position | sync with AD, magnet OFF, check position of beam and move dump to its original location if needed | e | 2.5 | S0+S2+NOSh+NOS3+C1+C2 | 2M | full brem at 2.5GeV - configuration 3 | |