...
particle | energy | trigger | events | purpose | mode | |||
---|---|---|---|---|---|---|---|---|
e | 2.5 | S0+S2+NOSh+NOS3+C1+C2 | 2M | full brem at 2.5GeV - configuration 2 | complete CU scan position 2 up to required statistics | |||
e | 2.5 | S0+S2+S4+NOSh+NOS3+C1+C2 | 100K | scan CU position 2 | sync with AD, magnet at 600A | |||
|
|
|
|
| refill cerenkov and place CU at 0 degree, x=201, Y=Z=0 | |||
e | 0.5 | S0 S0+S2+S4+NOSh+NOS3+C1+C2 | 25k | e in the CU, CU at 0 degree | sync with AD, check effect of dump on e beam, define how much the dump must be moved | |||
|
|
|
|
| move downstream layer of dump away from beam according to outcome of previous run | |||
e | 0.5 | S0+S2+NOSh+NOS3+C1+C2 | 25K | e in the CU, CU at 0 degree | syn with AD, magnet OFF; | 25K | tagged photons from 0.5GeV beam | sync with AD, magne at 120A, check empty events in the CU-CAL (gammas in the dump?); if nb of empty evts in the CAL is low compete the scan getting 100K evts |
e | 2 0.5 | S0+S2+S4+NOSh+NOS3+C1+C2 | 10K | direct e in the CU to check beam position | sync with AD, check position of beam | 25K | tagged photons from 0.5GeV beam - CU at 0 degree | sync with AD, magnet at 120A, check empty events in the CU-CAL (gammas in the dump?) |
e | 0 | e | 2.5 | S0+S2+S4+NOSh+NOS3+C1+C2 | 100k | 200K | tagged photons from 0.5GeV beam - CU at 0 degree scan CU position 3 (TBD) | sync with AD, magnet at 600A 120A, 25K evts run, collect 200Kto compensate for unavoidable unradiated e in the tagger |