...
| Info |
|---|
Source code can be found here and can be run locally using Local PyDM/Simulacrum Setup |
EPICS Screens
All screens for any given cavity can be gotten from either lcls-home (using SC gun) or SRF Home > RF > Cavities > More
GUI Procedure
| Info |
|---|
Blue is start, red is error, green is end, yellow is special case. Arrow with a diamond means conditional. |
Piezo Pre-RF Check
| Gliffy Diagram | ||||||
|---|---|---|---|---|---|---|
|
SSA Characterization
| Gliffy Diagram | ||||||
|---|---|---|---|---|---|---|
|
Cavity Tuning
| Gliffy Diagram | ||||||||
|---|---|---|---|---|---|---|---|---|
| Gliffy Diagram | ||||||||
|
...
- While it doesn't enable (while ACCL:LXB:XXXX:PZT:ENABLESTAT is not 1), toggle ENABLE to disabled (0) and enabled (1) again
...
- While it doesn't enable (while ACCL:LXB:XXXX:PZT:MODESTAT is not 0), toggle MODECTRL to feedback (1) and manual (0) again
...
|
8π/9 and 7π/9
| Gliffy Diagram | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Cavity Characterization
| Gliffy Diagram | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Piezo With RF
| Gliffy Diagram | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Ramp Up in SELAP
| Gliffy Diagram | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
- Retry up to 2 more times
- If the reset succeed within 3 total attemps
- Continue to step 9.b.i
- If the reset fails after 3 total attempts
- Throw an error
...
- Throw an error
...