From an e-mail from Amedeo:
Below is an example. Replace addresses and <pw>. Note that admin-pt2pt-mac
defines ports connected to other netwpork network devices, otherwise it's
admin-edge-port. You use 'tagged' for trunk ports (ie more than one
vlan in the same link), otherwise use 'untagged'.
...
...
hostname switch-daq-hutch1 |
...
ip address 172.21.24.35 255.255.255.0 |
...
enable super-user-password <pw> |
...
username admin password <pw> |
...
aaa authentication login default local none |
...
...
...
...
ip default-gateway 172.21.24.1 |
...
...
...
...
...
...
vlan 647 name pcdsn-cds-amo |
...
...
...
...
...
...
...
...
...
spanning-tree 802-1w admin-pt2pt-mac |
...
...
spanning-tree 802-1w admin-edge-port |
...
...
...
...
