Anchor | ||||
---|---|---|---|---|
|
Contents:
Table of Contents |
---|
Racks
The racks are numbered from 1 to 4, left to right. They are labeled as such as of August, 2011.
ATCA Crates
The ATCA crates are numbered from 1 to 4, from bottom to top. Thus ShelfMgr4
refers to the shelf manager in the top-most (large) crate.
Patch Panel
The Rack 4 patch panel is cabled to panels mounted near the work benches. These cables can carry either network or serial (RS-232) traffic.
Bench | Port |
---|---|
ATLAS IBL | 1 - 12 |
EXO | 13 - 24 |
LSST | 25 - 36 |
SLAC Network switch (Cisco) rtr-reg-l1
- net-admin
- Antonio Ceseracciu (mailto:Antonio Ceseracciu )
- Switch status and configuration
RCE Network switch (Foundry) reg-l1-rce
- Management of the Foundry FastIron Workgroup X448 (FWSX448) is provided by our group
- Foundry switch commands
- Foundry manuals of varying ages can be found hereor other places on the net:
- Foundry FastIron Stackable Hardware Installation Guide
- Foundry FastIron X-Series Configuration Guide
- Foundry Switch and Router Installation and Basic Configuration Guide
- Foundry Enterprise Configuration and Management Guide
- Foundry Security Guide
- Foundry Switch and Router Command Line Interface Reference
- Foundry Diagnostic Guide
- Foundry Management Information Base Reference
- Release Notes for the FastIron Workgroup Switch X-Series
Switch port assignments
IP address assignments
Digi Powerserver RS-232 server
- Model is Digi Portserver TS 16 MEI
- Manual can be found here
New lab machine setup
Taylor workgroup: dat
Adding a new user
- Issue training to the user on Lab 1 use. Points to make:
- Avoid working in the room alone
- Get, and keep current, appropriate electrical training
- Get a ladder if you need to get up high
- No climbing on chairs, tables, benches, etc.
- A spotter must be present in order to use a ladder
- No access to stuff not part of your project
- Stay out of the racks unless access is really needed
- High current sources present
- No reconfiguration of computers
- No reconfiguration of the network
- Keep the work area clean
- Avoid accessing Lab1 through the middle hallway door
- Point out Dataflow Lab 1 Confluence page and have the user go over it
- Introduce the user to Mike
Create a computer account for the user
Panel - For the old method, see
/reg/common/tools/bin/addlabuser
, etc.- This is obsolete as of 1/1/2012, now that we have moved to
unix-admin
style maintenance. However, it may still be needed for legacy set-ups. - On
rdsrv100
, issue:
/reg/common/tools/bin/addlabuser <username>
- Puts user in the appropriate groups, e.g.,
lab-users
- Add
--superuser
to add the user to thesudo
list, if necessary
- Puts user in the appropriate groups, e.g.,
- If this fails with a '
User not found in ou=People...
' message issue:
/reg/common/tools/ldap-helpers/nis2ldap
- Retry
addlabuser
- Retry
- This is obsolete as of 1/1/2012, now that we have moved to
- Add the account to the
u-reg-lab1
netgroup (NIS) with a request tounix-admin
- For the old method, see
- If the user is involved with RCE development (DAT, CTK, CCI, NPA, etc.):
- Send a request to
confluence-admin
to add the user to thecci-confluence-editors
group and get the user CCI JIRA privileges - Add the user to the
g-npa
AFS group, if necessary- Needed for NPA cvs/svn access, as in, e.g., ATLAS
- Add the user to the
g-cci
AFS group, if necessaryNeeded for RCE development svn access
Code Block pts membership g-cci pts adduser <username> g-cci
- Add the user to the
reg-lab1
YP group, if necessaryNeeded for certain Lab 1 NFS disk operations
Code Block ypgroup exam -group reg-lab1 ypgroup adduser -group reg-lab1 -user <username>
Some dongles have
udev
rules that put the usb device into the groupusers
Add the user to the
users
group on the relevant host, if necessaryCode Block sudo /usr/sbin/usermod -G users <username>
- Send a request to
- Add the account to the
reg-lab
listserv e-mail list (see below)
List of authorized users
Anchor | ||||
---|---|---|---|---|
|
Lab 1 Announcements
- Listserv list name: REG-LAB (slaconly)
- Administration: REG-LAB-ADMIN (slaconly)
- List FAQ: http://www2.slac.stanford.edu/comp/messaging/Reference/listserv-faq.htm
- General help: listserv (slaconly)
List of people authorized
Majordomo e-mail list
Network switches
- net-admin
- Antonio Ceseracciu <antony@slac.stanford.edu>
- Switch status and configuration