Page History

Updated 19 August 2009.

The original version of the Group-C to-do list (as of June 17 2009) is from Tim Nelson. Last update: 19 August 2009.

1- Room:

1. Fix HVAC leak:
   • it's not leaking anymore (as of 19 August 2009).
2. Phone installtion: DONE
3. Fiber optic installation:
   • Followed by Jim: Being done.

2- OGP:

1. Floor survey for 2.5" embedment: DONE. OK.
2. Clean machine and computer as well as possible: DONE.
3. Installation: DONE (July)
4. Calibration: DONE (18 and 20 August 2009).

3- Wirebonder: Installation DONE

4- Probe station:

1. Fabricate anodized aluminium plate: DONE.
2. Transfer hood to new plate; replace fabric with rubber flaps (neoprene?).
   • need new plate.
3. Need rack or table to hold test equipment.
   • to do: have to figure out what is needed: inputs from  Chris and Ryan.
4. Clean.
5. Install.

5- Laser Test Stand:

1. Clean up and place in room: DONE.
2. New (clean) computer for control: DONE.
3. Clean/new rack that fits under stand: DONE.
4. Fabricate hood similar to probe station: DONE.
5. Optics (ThorLabs): collimation, iris, splitter/power meter, spatial filter, focusing
6. Mouting for optics
7. Labview programming

6- Glue station:

1. Get table replacement:
   • John is contacting purchasing department.
2. Setup scale and centrifuge
3. Get centrifuge tubes: DONE.
4. Get glue(West Systems", Hexcel?, Araldite TDR1100?, Hysol?):
   • Ask Chris for recommendations

7-Workstations

1. Set up glue dispenser
   • Talk to Chris for recommendations
2. Get supplies for glue dispenser (barrel, centrifuge tubes, syringues, tip assortement):
   • Talk to Chris for recommendations.
3. Connect vaccum pump to workstations:
   • Jim is taking care of it.
4. Ground all Terra table: DONE.

8- Bump bonding

1. Status of stimulus request?
2. Re-approach joint funding with UCSC, Stanford, SLAC?
3. Get firm quote on K&S iConn ball bonder/stud bumper

9- Supplies

1. Wider variety of gloves:
   • Ask Tim/Chris
2. Larger shoe covers: DONE.
3. Glove dispenser for inside room:
   • Jim is taking care of it.
4. More dispensers in gowning area:
   • Jim is taking care of it

10-Maintenance

1. Cleanup after all move-in
2. Test cleanliness with our counter
3. Re-certification?

11- Tool box

1. Buy tools:
   • Jim is taking care of it, with help from Chris for special tools.