Description of detectors supported by the department - specs, description, deployment, calibration 
, default register settings, etc. Link to trackers?
| Page Tree | ||
|---|---|---|
|
Detector inventory and location. Last updated: 5/29/2024
| no. | Detector | config | no. | location | note | Serial ID | Gain calibrated? (Cu) |
| ePix10k | |||||||
| 1 | ePix10ka | front | 28 | ASC | |||
| 2 | ePix10ka | front | 27 | CXI | |||
| 3 | ePix10ka | side (1mm Si) | 36 | ASC | |||
| 4 | ePix10ka | front | 31 | TID | Marginal detector. For development, not operations (in Xavier's drawer) | ||
| 5 | ePix10kQuad | Q6 | UEDASC | 360Hz detector. | |||
| 6 | ePix10kQuad | MEC Q0 | MEC | All module IDs | |||
| 7 | ePix10kQuad | MEC Q1 | MEC | All module IDs | |||
| 8 | ePix10kQuad | MEC Q2 | MEC | All module IDs | |||
| 9 | ePix10kQuad | MEC Q3 | MEC | All module IDs | |||
| 10 | ePix10kQuad | MEC Q4 | ASC | All module IDs | |||
| 11 | ePix10kQuad | MEC Q5 | ASC | All module IDs | |||
| 12 | ePix10k2M.0 | 0 | TID | with Chris Kenney for asic replacement | All module IDs | ||
| 13 | ePix10k2M.1 | 1 | MFX | All module IDs | |||
| ePix100 | |||||||
| 14 | ePix100 | side | 34 | TID | never worked? | ||
| 15 | ePix100 | front | 30 | ASC | 3925999620-171598081-1879048214-1794135040-1745668107-2998264677-2181038105 | ||
| 16 | ePix100 | front | 25 | TID | with Chris O'Grady for firmware update/testing | 3925999620-1000686337-1174405130-3104330752-0681854067-2671186177-3472883735 | Yes |
| 17 | ePix100 | front | 12 | ASC | 3925999620-1000248321-4076863498-1794137088-0410306571-2402454273-0067108888 | Data taken, needs to be analyzed | |
| 18 | ePix100 | front | 11 | MEC | 3925999620-0996663297-3791650826-1232098304-0953206283-2655595777-0520093719 | ||
| 19 | ePix100 | front | 10 | ASC | 3925999620-0996513537-2080374794-1794135040-0940361739-2398406657-0419430424 | Data taken, needs to be analyzed | |
| 20 | ePix100 | front | 9 | ASC | 3925999620-0996432897-3590324234-1232100352-1154532875-2654088449-0033554455 | Data being taken | |
| 21 | ePix100 | front | 8 | ASC | 3925999620-0996579585-0553648138-1232098304-1221641739-2650251521-3976200215 | Data taken, needs to be analyzed | |
| 22 | ePix100 | front | 7 | MEC | 3925999620-0999521281-2533359626-1794137088-1745668107-2398940417-2046820376 | ||
| 23 | ePix100 | front | 5 | perhaps MEC? Can't find last use. | 3925999620-0997249025--0570425354-0629691392-0337412451-2397900801-4076863512 | ||
| 24 | ePix100 | front | 4 | ASC | 3925999620-0998275585-0385875978-1232100352-0416335371-2654033921-1056964631 | Data taken, needs to be analyzed | |
| 25 | ePix100 | side | S1 | missing  | 3925999620-1000144641-1258291210-0629693440-0611090787-2995437313-0973078553 | Yes | |
| 26 | ePix100 | side | S2 | ASC | 3925999620-0997117953-4227858442-1794137088-0403490827-2403244545-1224736792 | ||
| Jungfrau | |||||||
| 27 | JF0.5M | ASC | |||||
| 28 | JF1M | XPP | |||||
| 29 | JF4M | CXI | |||||
| RIXS-CCD | |||||||
| 30 | RIXS-CCD | RIXS | STA52000 SN31201 | ||||
| 31 | RIXS-CCD | ASC | STA52000 SN31179 | ||||
| CSPAD | |||||||
| 32 | CSPAD 2M | CXI | |||||
| Prototypes | |||||||
| 33 | ePix10ka | front | 42 | ASC | non-ghosting prototype | ||
| 34 | ePix10kaN | front | 26 | ASC | GaAs | ||
| 35 | ePix10kaN | front | ?? | TID | CdZnTe | ||
| 36 | ePix10kaN | front | Ge2 | ASC | Ge2. Only modules. This module has the H pattern on the ASIC outside the sensor. | ||
| 37 | ePix10kaN | front | ?? | TID | Ge | ||
| 38 | ePix10kaN | front | ?? | TID | Ge | ||
| 39 | ePixHR | front | H01 | ASC | ASIC v4. | can hold full bias. Partially connected sensor | |
| 40 | ePixHR | front | no etch | ASC | ASIC v4. | fill sensor connected, can only hold bias to 80V | |
| 41 | ePixM | side | ASC | ||||
| 42 | ePix250S | front | 22 | ASC | |||