...

Fig 7. FL fine scan across the edge, 100% beam.

Follow up measurements when we were changing the fibers around

The following measurements where performed:

Standard fiber setting(xcsc00121) :

run 506

Changing the fiber pair after the breakout:

run 507

Swaping the timing fibers after restoring th fiber pair after breakout:

run 508

The results where analysed by Philip and can be seen in the presebtation below.

XCSTwoQuadIssue (Philip)

The main take away, the timing issue follows the quad and appears to be a camera problem (note to self: view the image on the screen as what a fiber sees, not as a quad, which makes it easier to mentally follow if it is quad or fiber problem).