...
| Device | Motor | Type | Hardware Address | EPICS PV | Notes | Cabled? | Running? | Comments |
|---|---|---|---|---|---|---|---|---|
| F-XRTS | X | IMS | digi-mec-07:2111 | MEC:TC1:MMS:09 | Spectrometer Screen; XRTS X in-vac | MFORCE R64A E27 Flange D DB50 | ||
| Y | IMS | digi-mec-07:2110 | MEC:TC1:MMS:08 | Spectrometer Screen; XRTS Y in-vac | MFORCE R64A E27 Flange D DB50 | |||
| Z | IMS | digi-mec-07:2109 | MEC:TC1:MMS:07 | Spectrometer Screen; XRTS Z in-vac | MFORCE R64A E27 Flange D DB50 | |||
| B-XRTS | X&Y | Newport | LTA → 2-axis horizontal motion in-vac | |||||
| Z | Newport | UTS150PPV6 → vertical motion in-vac | ||||||
| West Beam Lens | XYZ | Newport | MFA in-vac | Yes | No | Cables: *1 - XPS3 #1, Port 3 (PPL 19), MFA-CCV6 found, doesn't Init, both limit switches set *2 - XPS3 #2, Port 2 (PPL 18), MFA-CCV6 found, init, ref. *3 - XPS3 #3, Port 1 (PPL 17) MFA-CCV6 found, init, ref. | ||
| East Beam Lens | XYZ | Newport | MFA in-vac | Yes | No | Cables: *4 - XPS3 #4, Port 4 (PPL 20), MFA-CCV6 found, init, ref. *5 - XPS3 #5, Port 6 (PPL 22). MFA-CCV6 found, doesn't init, both limit switches set *6 - XPS2 #1, Port 1 (PPL 9), not found Will move connection. | ||
| Target | Hexapod | digi-mec-03:2015 | IOC:MEC:HEX1 | in-vac | Yes | Yes | IOC: ioc-mec-hex1 HOST: ioc-mec-mot3. RHEL5 Supermicro, MEZZ R64A E34 | |
| PLS-85 | moxa-mec-09:4005 | MEC:USR:MMS:17 | in-vac | Yes | Yes | IOC: ioc-mec-usrppl-ims HOST: Ioc-mec-opal01. RHEL5, Supermicro, R60 E30 | ||
| XYZ? | in-vac | |||||||
| Beam Block Motion | TBD | Newport | MFA in-vac | L-10034 user supplied. | ||||
| TBD | Newport | MFA in-vac | L-10034 user supplied. | |||||
| Misc. | Linear | Newport | XPS 2 Channel 6 | MEC:PPL:MMN:14 | 500 mm, in-air | Autoconfig; reboot. | ||
| Zyla turret | Dumb | moxa-mec-09:4004 | MEC:USR:CLF:01 | in-air | Connected. This uses a manual controller. | |||
| Zyla focus | Dumb | moxa-mec-09:4003 | MEC:USR:CLZ:01 | in air | ||||
| Zyla rotation scintillator | Dumb | mox-mec-r62-23:4002 | MEC:USR:MMS:23 | in air |