...
Tolerance Item | Where Used | Tolerance (mm, Dia.) |
Pick-up Table Edge Repeatability (repeatability of lining up module to machined edges) | Locating Module to Pickup Table | .000 |
Bridge Bushing ID | Locating Loading Bridge to Pick-up Table | .012 |
Pick-up Table Pin OD | Locating Loading Bridge to Pick-up Table | .012 |
Pin Location | Locating Loading Bridge to Pick-up Table | .025 |
Bridge Bushing ID | Locating Loading Bridge to Loading Fixture | .012 |
Baseplate Pin OD | Locating Loading Bridge to Loading Fixture | .012 |
Pin Location | Locating Loading Bridge to Loading Fixture | .025 |
Total: | .98mm 098mm (+/-.050mm) | |
Root Sum Square: | .043mm (+/-.019mm) |
...
Tolerance Item | Where Used | Tolerance (mm, Dia.) |
Pin Location | Locating Stave to Baseplate | .025 |
Pick-up Table Edge Accuracy (absolute position) | Locating Module to Pick-up Table*choose loading tooling baseplate coordinate system to line up with 1st module *this item affects all modules equally so does not affect gap/distance between modules | .025 |
Total: | .050mm (+/-.025mm) |
...