...
https://www.xilinx.com/support/download.html
Vivado to program the FPGA
- connect your PC to the JTAG interface of KCU105
- power on the board
- start vivado
- open hardware manager
- open target, and choose "auto connect":
- if it failed to see the FPGA, please check the USB cable connection, and check your PC has correctly installed the JTAG interface driver.
- for windows OS, the driver is always installed when you install vivado (or vivado lab edition)
- for linux OS, need to manually install the driver, see here: https://www.xilinx.com/support/documentation/sw_manuals/xilinx2021_2/ug973-vivado-release-notes-install-license.pdf#page=47
Pre-compiled firmware list
...