...
- In the future, review drawings in Mechanics meeting and release/send to add to Windchill CAD library, to reduce risk of interface issues.
...
| Tolerance Item | Where Used | Tolerance (mm, Dia.) |
| Pin Location | Locating Stave to Baseplate | .025 |
Pick-up Table Edge Accuracy (absolute position) | Locating Module to Pick-up Table *choose loading tooling baseplate coordinate system to line up with 1st module *this item affects all modules equally so does not affect gap/distance between modules | .025 |
Total: | .050mm (+/-.025mm) |
...
Notes for design of 19-1 Stave tooling:
- Try to reRe-use tooling from 19-1 Quad loading bridge if possible; make new 19-1 linear Triplet loading bridge and toolingwhere possible.
- Using beads to set glue thickness; no longer need dial indicators or differential adjusters.
- Use 2 sets of micrometer adjusters (absolute scale).
- Consider adding ssoft Add soft material to vacuum pads for better sealing and smoothness.
- Consider adding a hole patterns pattern for trussing / support below the 19-1 Stave baseplate.
- Reconfirm that Stave and Module CADs / drawings are compatible with tooling, before manufacture.
- Use dowel pins and screw interface to ends of Stave (locate same as in production assembly).
- Consider longer dowel pins in the baseplate (help locate the bridge, without pivoting).
- Consider handling frame integration.
Some past presentations:
...