...
- In the future, review drawings in Mechanics meeting and release/send to add to Windchill CAD library, to reduce risk of interface issues.
...
Notes for design of 19-1 Stave tooling:
- ReTry to re-use tooling from 19-1 Quad loading bridge if possible; make new 19-1 linear Triplet loading bridge and tooling.
- Using beads to set glue thickness; no longer need dial indicators or differential adjusters.
- Use 2 sets of micrometer adjusters (absolute scale).
- Add soft Consider adding ssoft material to vacuum pads for better sealing and smoothness.
- Consider adding a hole patterns for trussing / support below the 19-1 Stave baseplate.
- Reconfirm that Stave and Module CADs / drawings are compatible with tooling, before manufacture.
- Use dowel pins and screw interface to ends of Stave (locate same as in production assembly).
- Consider longer dowel pins in the baseplate (help locate the bridge, without pivoting).
- Consider taper pins / "coarse" dowels to line up the precision dowels.
- Consider handling frame for transfer from loading fixture to QC Box.
- Consider covers over modules already installed.
Some past presentations:
...