...
- cd isegSnmpControl-SL71-x64-1.1.7.0/
- bash ./start.sh
- (First run may ask for module IP address in IP dialog).
- Simply click Vset boxes to set desired values and right click Status box to get pull down menu to turn on/off etc.
Raspberry Pi Based Control/Monitoring
Many small lab test setups and some part of the B33 integration setup are standardizing to the use of Raspberry Pi 4 to mediate the ethernet connection to the ITk DAQ network for communication and connecting to various types of sensors using dedicated shields. The control/monitoring program running on Raspberry Pi can also reach out through the ITk DAQ network to e.g. Agilent PSU through PROLOGIX ETH-GBIP adaptor for integrated control of module power.
Widgetloads Pi-SPi-8AI+ readout interface is widely in many test setups. It support 4 types of signals 4-20mA/5V VDC/10V VDC/Temp (NTC) which can be easily reconfigured to host a combination of these by solder fill of the appropriate pads at the back of the card. |
---|