...
| View file | ||||
|---|---|---|---|---|
|
Rd53a Pixel Calibration Software Update Log
June 30, 2021:
RCE_ScanConsole_2021_06_30_00_06_23.tar.gz
Update List:
1) disable firmware GlobalPulse during chip configuration.
a) enabling firmware GlobalPulse during chip configuration will disturbing the chip config. Chip randomly failed during chip config
2) Improving the plotting control.
a) "-p" to enable plotting
b) "-P" to enable ploting while Occupancy map error detected during digital/analog scan (need to enable error detector in digital/analog scan configuration)
c) "-P" was used for "port" assignment. Now, change to "-O" for port
June 22, 2021:
RCE_ScanConsole_2021_06_22_01_08_18.tar.gz
Update List:
1) add GlobalPulse to firmware. and the frequency is configurable;
2) add "enable/disable Rx" switch to firmware to improve the analog scan performance. So, no need for long sleeping time after ECR.